时间戳

首页 > 技术文章 > Linux 部署 iSCSI 客户端配置(Linux)

Linux 部署 iSCSI 客户端配置(Linux)

itwangqiang 2020-12-14 19:51 原文

Linux 部署 iSCSI 客户端配置(Linux)

客户端环境

Client ：RHEL8
IP : 192.168.121.11

一、测试与服务端的连通性

[root@Client-linux ~]# ping 192.168.121.10
PING 192.168.121.10 (192.168.121.10) 56(84) bytes of data.
64 bytes from 192.168.121.10: icmp_seq=1 ttl=64 time=0.833 ms
64 bytes from 192.168.121.10: icmp_seq=2 ttl=64 time=0.454 ms
64 bytes from 192.168.121.10: icmp_seq=3 ttl=64 time=0.395 ms
^C
--- 192.168.121.10 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 16ms
rtt min/avg/max/mdev = 0.395/0.560/0.833/0.195 ms

二、安装 ISCSI 客户端程序 ：iscsi-initiator-utils

[root@Client-linux ~]# yum install -y iscsi-initiator-utils

三、客户端修改 ISCSI 配置文件 ：/etc/iscsi/ 目录下俩个的文件

  1. initiatorname.iscsi ：定义客户端连接的名称（iqn.2020-12.linux.iscsi.server:client）
[root@Client-linux ~]# vim /etc/iscsi/initiatorname.iscsi 
[root@Client-linux ~]# cat /etc/iscsi/initiatorname.iscsi 
InitiatorName=iqn.2020-12.linux.iscis.server:client
  1. iscsid.conf ：启用 CHAP 认证

四、启动 iscsid 服务

[root@Client-linux ~]# systemctl start iscsid
[root@Client-linux ~]# systemctl enable iscsid
Created symlink /etc/systemd/system/multi-user.target.wants/iscsid.service → /usr/lib/systemd/system/iscsid.service.
[root@Client-linux ~]# systemctl status iscsid
● iscsid.service - Open-iSCSI
   Loaded: loaded (/usr/lib/systemd/system/iscsid.service; enabled; vendor preset: disabled)
   Active: active (running) since Thu 2020-12-17 03:39:46 CST; 14s ago
     Docs: man:iscsid(8)
           man:iscsiuio(8)
           man:iscsiadm(8)
 Main PID: 2063 (iscsid)
   Status: "Ready to process requests"
    Tasks: 1 (limit: 11340)
   Memory: 7.8M
   CGroup: /system.slice/iscsid.service
           └─2063 /usr/sbin/iscsid -f

Dec 17 03:39:46 Client-linux systemd[1]: Starting Open-iSCSI...
Dec 17 03:39:46 Client-linux systemd[1]: Started Open-iSCSI.

五、客户端发现存储服务器（服务端共享的存储设备）

[root@Client-linux ~]# iscsiadm -m discovery -t st -p 192.168.121.10
192.168.121.10:3260,1 iqn.2020-12.linux.iscis.server:server

或者

[root@Client-linux ~]# iscsiadm -m discovery -t sendtargets -p 192.168.121.10
192.168.121.10:3260,1 iqn.2020-12.linux.iscis.server:server

五、客户端登陆存储服务器

  1. 首先查看本地所拥有的磁盘
[root@Client-linux ~]# lsblk 
NAME          MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sr0            11:0    1  7.3G  0 rom  
nvme0n1       259:0    0   80G  0 disk 
├─nvme0n1p1   259:1    0    1G  0 part /boot
└─nvme0n1p2   259:2    0   79G  0 part 
  ├─rhel-root 253:0    0   50G  0 lvm  /
  ├─rhel-swap 253:1    0    2G  0 lvm  [SWAP]
  └─rhel-home 253:2    0   27G  0 lvm  /home
  1. 登陆存储服务器
[root@Client-linux ~]# iscsiadm -m node -T iqn.2020-12.linux.iscis.server:server -p 192.168.121.10 --login   （用 -l 选项也可以）
Logging in to [iface: default, target: iqn.2020-12.linux.iscis.server:server, portal: 192.168.121.10,3260]
Login to [iface: default, target: iqn.2020-12.linux.iscis.server:server, portal: 192.168.121.10,3260] successful.

六、查看 ISCSI 在本地映射的磁盘

[root@Client-linux ~]# lsblk 
NAME          MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda             8:0    0   20G  0 disk                //映射的第一块磁盘
sdb             8:16   0    1G  0 disk                //映射的第二块磁盘
sr0            11:0    1  7.3G  0 rom  
nvme0n1       259:0    0   80G  0 disk 
├─nvme0n1p1   259:1    0    1G  0 part /boot
└─nvme0n1p2   259:2    0   79G  0 part 
  ├─rhel-root 253:0    0   50G  0 lvm  /
  ├─rhel-swap 253:1    0    2G  0 lvm  [SWAP]
  └─rhel-home 253:2    0   27G  0 lvm  /home

推荐阅读