When the needleless infusion connector needs to be replaced
Connectors
fall off for any reason; there is residual blood in the connector; blood needs
to be drawn from the catheter before and after culture; the connector is
suspected of being contaminated; the provisions of operating procedures or
practical guidelines;
Procedure
for replacing the infusion connector
①
Article preparation: infusion connector, normal saline pre-rinsing solution, 75%
ethanol cotton sheet;
②
Check the patient and explain the operation process to the patient;
③
Open the outer packaging of the connector and pre-flush the infusion connector
with physiological saline;
④
Remove the original infusion connector;
⑤
Disinfuse the infusion with 75% ethanol cotton
Cross
section and surrounding of the joint;
⑥
Connect the new infusion connector to ensure a tight connection;
⑦
Connect the syringe and flush the catheter with pulsed positive
pressure;
⑧
Record the connector replacement time and signature.
Yuhuan Shengjiu Mould Co., Ltd. is a professional China medical mould manufacturer that produces needleless infusion connectors. Safe application in medical Needleless Injection Site applications. We have strict quality control throughout the production process of our products, making our products a safe choice for everyone. Welcome to buy: https://www.medicalmould.net/product/