共计使用三台虚拟机进行部署实验，系统环境：centos7.3
在master上进行部署配置：
配置主机名
[root@localhost ~]# hostname salt-master
[root@localhost ~]# cat /etc/sysconfig/network
# Created by anaconda
HOSTNAME=salt-master
配置hosts
cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
salt-master 192.168.143.19
salt-minion-01 192.168.143.28
salt-minion-02 192.168.143.35
关闭防火墙
[root@localhost ~]# systemctl disable firewalld.service
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
Removed symlink /etc/systemd/system/basic.target.wants/firewalld.service.
[root@localhost ~]# systemctl stop firewalld.service
修改selinux为Permissive模式
[root@localhost ~]# setenforce 0
[root@localhost ~]# getenforce
Permissive
安装配置阿里云yum源
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo
安装epel-release和salt-master工具包
[root@localhost ~]# yum install epel-release –y
[root@localhost ~]# yum install salt-master –y
配置saltstack开机自启动服务
[root@localhost ~]# systemctl enable salt-master.service
至此，Master部署配置完成！
在第一个minion端部署配置：
配置主机名
[root@localhost ~]# hostname salt-minion-01
[root@localhost ~]# cat /etc/sysconfig/network
# Created by anaconda
HOSTNAME=salt-minion-01
配置hosts
cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
salt-master 192.168.143.19
salt-minion-01 192.168.143.28
salt-minion-02 192.168.143.35
关闭防火墙
[root@localhost ~]# systemctl disable firewalld.service
Removed symlink /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service.
Removed symlink /etc/systemd/system/basic.target.wants/firewalld.service.
[root@localhost ~]# systemctl stop firewalld.service
修改selinux为Permissive模式
[root@localhost ~]# setenforce 0
[root@localhost ~]# getenforce
Permissive
安装配置阿里云yum源
[root@localhost ~]# wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo
安装epel-release工具包和salt-minion客户端
[root@localhost ~]# yum install epel-release -y
[root@localhost ~]# yum install salt-minion -y
在minion端配置master的ip地址和ID
[root@localhost ~]# cat /etc/salt/minion
##### Primary configuration settings #####
##########################################
# This configuration file is used to manage the behavior of the Salt Minion.
# With the exception of the location of the Salt Master Server, values that are
# commented out but have an empty line after the comment are defaults that need
# not be set in the config. If there is no blank line after the comment, the
# value is presented as an example and is not the default.
# Per default the minion will automatically include all config files
# from minion.d/*.conf (minion.d is a directory in the same directory
# as the main minion config file).
#default_include: minion.d/*.conf
# Set the location of the salt master server. If the master server cannot be
# resolved, then the minion will fail to start.
#master: salt
maser: 192.168.143.19
# If multiple masters are specified in the 'master' setting, the default behavior
# is to always try to connect to them in the order they are listed. If random_master is
# set to True, the order will be randomized instead. This can be helpful in distributing
# the load of many minions executing salt-call requests, for example, from a cron job.
# If only one master is listed, this setting is ignored and a warning will be logged.
# NOTE: If master_type is set to failover, use master_shuffle instead.
#random_master: False
# Use if master_type is set to failover.
#master_shuffle: False
# Minions can connect to multiple masters simultaneously (all masters
# are "hot"), or can be configured to failover if a master becomes
# unavailable. Multiple hot masters are configured by setting this
# value to "str". Failover masters can be requested by setting
# to "failover". MAKE SURE TO SET master_alive_interval if you are
# using failover.
# master_type: str
# Poll interval in seconds for checking if the master is still there. Only
# respected if master_type above is "failover". To disable the interval entirely,
# set the value to -1. (This may be necessary on machines which have high numbers
# of TCP connections, such as load balancers.)
# master_alive_interval: 30
# Set whether the minion should connect to the master via IPv6:
#ipv6: False
# Set the number of seconds to wait before attempting to resolve
# the master hostname if name resolution fails. Defaults to 30 seconds.
# Set to zero if the minion should shutdown and not retry.
# retry_dns: 30
# Set the port used by the master reply and authentication server.
#master_port: 4506
# The user to run salt.
#user: root
# Setting sudo_user will cause salt to run all execution modules under an sudo
# to the user given in sudo_user. The user under which the salt minion process
# itself runs will still be that provided in the user config above, but all
# execution modules run by the minion will be rerouted through sudo.
#sudo_user: saltdev
# Specify the location of the daemon process ID file.
#pidfile: /var/run/salt-minion.pid
# The root directory prepended to these options: pki_dir, cachedir, log_file,
# sock_dir, pidfile.
#root_dir: /
# The directory to store the pki information in
#pki_dir: /etc/salt/pki/minion
# Explicitly declare the id for this minion to use, if left commented the id
# will be the hostname as returned by the python call: socket.getfqdn()
# Since salt uses detached ids it is possible to run multiple minions on the
# same machine but with different ids, this can be useful for salt compute
# clusters.
id: salt-minion-01
配置开机minion开启自启动服务
[root@localhost ~]# systemctl enable salt-minion.service
Created symlink from /etc/systemd/system/multi-user.target.wants/salt-minion.service to /usr/lib/systemd/system/salt-minion.service.
至此，第一个minion配置部署完毕，第二个minion部署配置同理第一个minion部署配置！
启动salt-master服务: systemctl start salt-master.service
启动salt-minion服务：systemctl start salt-minion.service
测试master和minion之间的通信是否正常
salt "*" test.ping
查看 minion 列表:
salt-key –L
认证所有 key，当然你也可以通过
salt-key -a saltstack-minion 指定某台 minion
进行认证 key
说明：-a ：accept ，-A：accept-all，-d：delete，-D：delete-all。可以使用 salt-key 命令查看到已经签名的客户端。此时我们在客户端的 /etc/salt/pki/minion 目录下面会多出一个minion_master.pub 文件。