1. 安装源：
Once you determine your architecture then you can install the correct EPEL repository with the below commands:
wget http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm wget http://rpms.famillecollet.com/enterprise/remi-release-6.rpm sudo rpm -Uvh remi-release-6*.rpm epel-release-6*.rpm
You can verify that the EPEL repository is there by running the below command and you should see the EPEL repository listed
sudo yum repolist
Once you have verified the EPEL repository is installed correctly you need to perform the last few steps below this will install XRDP and Tiger VNC Server for you to connect to. The Front end of XRDP uses the RDP protocol and internally it uses VNC to connect and display the Remote Desktop to you.
2. 执行安装命令
sudo yum install -y xrdp vnc-server sudo yum install xrdp tigervnc-server
3.编辑 /etc/sysconfig/vncservers 文件
编辑 /etc/sysconfig/vncservers 文件 在文件的末尾添加如下两行。
VNCSERVERS="2:root" VNCSERVERARGS[1]="-geometry 1280x720"
4. 设置密码：
执行vncpasswd设定密码，这个密码用于登录
5. 使用 service 命令来启动 xrdp 和 vcnserver 功能。
sudo service vncserver start sudo service xrdp start
sudo chkconfig xrdp on sudo chkconfig vncserver on
6. iptalble防火墙：开启3389端口，开启防火墙后要重启 `services iptables restart`
iptables -A INPUT -m state --state NEW -m tcp -p tcp --dport 3389 -j ACCEPT
7. 可以使用windows 远程桌面工具登录Linux
> cmd
> mstsc