时间戳

首页 > 技术文章 > 华为VRRP配置（虚拟网关备份协议）

华为VRRP配置（虚拟网关备份协议）

cj1698 2021-09-06 22:39 原文

这里只单纯配置了VRRP

创建两个vlan 10 20，做负载分担

 

 

两台是设备Eth-trunk1口放行vlan10 20

SW1配置

[sw1]vlan batch 10 20    #创建vlan10 20

[sw1-Vlanif10]dis this
#
interface Vlanif10
 ip address 192.168.10.1 255.255.255.0        #配置物理网关地址
 vrrp vrid 1 virtual-ip 192.168.10.254        #配置vrrp组1  配置虚拟网关地址
 vrrp vrid 1 priority 120        #配置优先级为120，默认100数字越大越优先，使它成为vlan10的Master
 vrrp vrid 1 track interface GigabitEthernet0/0/3 reduced 30        #检测上联端口，如果断开优先级降低30（之后会作为backup）
#
　　
[sw1-Vlanif20]dis this
#
interface Vlanif20
 ip address 192.168.20.1 255.255.255.0        #配置vlan20的物理网关
 vrrp vrid 2 virtual-ip 192.168.20.254        #配置vlan20的虚拟网关
 vrrp vrid 2 preempt-mode timer delay 20    #延迟20秒后抢占        
#

 

SW2配置

[sw2]vlan batch 10 20
[sw2-Vlanif10]dis this
#
interface Vlanif10
 ip address 192.168.10.2 255.255.255.0　　#配置vlan10网关
 vrrp vrid 1 virtual-ip 192.168.10.254　　#配置vrrp组1 配置虚拟网关和SW1一样
 vrrp vrid 1 preempt-mode timer delay 20　　#延迟20s后抢占
#

[sw2-Vlanif20]dis this
#
interface Vlanif20
 ip address 192.168.20.2 255.255.255.0　　#配置vlan20网关
 vrrp vrid 2 virtual-ip 192.168.20.254　　#配置vrrp组2 配置虚拟网关和SW1一样
 vrrp vrid 2 priority 120　　#配置优先级为120，使vrrp2 成为vlan20的Master

 vrrp vrid 2 track interface GigabitEthernet0/0/22 reduced 30  #配置上联链路检测，如果断开优先级减去30 使它成为backup

#

 

 查看vrrp状态

SW1

<sw1>dis vrrp
  Vlanif10 | Virtual Router 1
    State : Master　　　　#vrid1组为vlan10的Master
    Virtual IP : 192.168.10.254
    Master IP : 192.168.10.1
    PriorityRun : 120
    PriorityConfig : 120
    MasterPriority : 120
    Preempt : YES   Delay Time : 0 s
    TimerRun : 1 s
    TimerConfig : 1 s
    Auth type : NONE
    Virtual MAC : 0000-5e00-0101
    Check TTL : YES
    Config type : normal-vrrp
    Track IF : GigabitEthernet0/0/3   Priority reduced : 30
    IF state : UP
    Create time : 2021-09-07 08:22:09 UTC-08:00
    Last change time : 2021-09-07 10:22:52 UTC-08:00

  Vlanif20 | Virtual Router 2
    State : Backup　　　　#vrid2组为vlan20的backup
    Virtual IP : 192.168.20.254
    Master IP : 192.168.20.2
    PriorityRun : 100
    PriorityConfig : 100
    MasterPriority : 120
    Preempt : YES   Delay Time : 20 s
    TimerRun : 1 s
    TimerConfig : 1 s
    Auth type : NONE
    Virtual MAC : 0000-5e00-0102
    Check TTL : YES
    Config type : normal-vrrp
    Create time : 2021-09-07 08:31:38 UTC-08:00
    Last change time : 2021-09-07 10:54:05 UTC-08:00

 

SW2

[sw2]dis vrrp
  Vlanif10 | Virtual Router 1
    State : Backup　　　　#vrid1为vlan10的backup
    Virtual IP : 192.168.10.254
    Master IP : 192.168.10.1
    PriorityRun : 100
    PriorityConfig : 100
    MasterPriority : 120
    Preempt : YES   Delay Time : 20 s
    TimerRun : 1 s
    TimerConfig : 1 s
    Auth type : NONE
    Virtual MAC : 0000-5e00-0101
    Check TTL : YES
    Config type : normal-vrrp
    Create time : 2021-09-07 08:22:37 UTC-08:00
    Last change time : 2021-09-07 10:22:52 UTC-08:00

  Vlanif20 | Virtual Router 2
    State : Master　　　　#vrid2为vlan20的Master
    Virtual IP : 192.168.20.254
    Master IP : 192.168.20.2
    PriorityRun : 120
    PriorityConfig : 120
    MasterPriority : 120
    Preempt : YES   Delay Time : 0 s
    TimerRun : 1 s
    TimerConfig : 1 s
    Auth type : NONE
    Virtual MAC : 0000-5e00-0102
    Check TTL : YES
    Config type : normal-vrrp
    Track IF : GigabitEthernet0/0/22   Priority reduced : 30
    IF state : UP
    Create time : 2021-09-07 08:32:01 UTC-08:00
    Last change time : 2021-09-07 10:54:05 UTC-08:00

 

这样可实现负载分担，vlan10的流量走SW1，vlan20的流量走SW2

 
 

推荐阅读