1、准备2台服务器
10.0.0.12 10.0.0.13
2、关闭服务器的防火墙
systemctl stop firewalld
3、配置nginx的yum源,俩台服务器做相同的操作
[root@ localhost network-scripts]# vim /etc/yum.repos.d/nginx.repo [nginx] name=nginx repo baseurl=http://nginx.org/packages/centos/7/$basearch/ gpgcheck=0 enabled=1
4、这个时候下载所需要的安装的nginx、keepalived
yum -y install nginx keepalived
5、在10.0.0.12服务器上配置keepalived
[root@ localhost network-scripts]# vim /etc/keepalived/keepalived.conf ! Configuration File for keepalived global_defs { notification_email { acassen@firewall.loc failover@firewall.loc sysadmin@firewall.loc } notification_email_from Alexandre.Cassen@firewall.loc smtp_server 192.168.200.1 smtp_connect_timeout 30 router_id LVS_DEVEL vrrp_skip_check_adv_addr vrrp_garp_interval 0 vrrp_gna_interval 0 } vrrp_instance VI_1 { state MASTER interface ens33 virtual_router_id 51 priority 100 advert_int 1 authentication { auth_type PASS auth_pass 1111 } virtual_ipaddress { 10.0.0.100 } } virtual_server 10.0.0.100 80 { delay_loop 6 lb_algo rr lb_kind DR #因为这里要做LVS的DR模式 protocol TCP nat_mask 255.255.255.0 real_server 10.0.0.12 80 { weight 1 TCP_CHECK { connect_timeout 3 connect_timeout 80 nb_get_retry 3 delay_before_retry 3 } } real_server 10.0.0.13 80 { weight 1 TCP_CHECK { connect_timeout 3 connect_timeout 80 nb_get_retry 3 delay_before_retry 3 } } }
vrrp_strict #centos7里的keepalived有一个广播 这个需要删除 切记
6、在10.0.0.13服务器上配置keepalived 这里的配置文件和上一台服务器的配置文件有不同的地方 上一台是主 这台是从服务器
[root@ localhost network-scripts]# vim /etc/keepalived/keepalived.conf ! Configuration File for keepalived global_defs { notification_email { acassen@firewall.loc failover@firewall.loc sysadmin@firewall.loc } notification_email_from Alexandre.Cassen@firewall.loc smtp_server 192.168.200.1 smtp_connect_timeout 30 router_id LVS_DEVEL vrrp_skip_check_adv_addr vrrp_garp_interval 0 vrrp_gna_interval 0 } vrrp_instance VI_1 { state BACKUP #这里要改成backup,因为这台服务器是从的 interface ens33 #这个网卡名字要和自己服务器网卡名字一样,否则也是不会出效果的 virtual_router_id 51 priority 90 #这里有一个优先级,要改成比上一台服务器的优先级低 advert_int 1 authentication { auth_type PASS auth_pass 1111 } virtual_ipaddress { 10.0.0.100 } } virtual_server 10.0.0.100 80 { delay_loop 6 lb_algo rr lb_kind DR #因为这里要做LVS的DR模式 protocol TCP nat_mask 255.255.255.0 real_server 10.0.0.12 80 { weight 1 TCP_CHECK { connect_timeout 3 connect_timeout 80 nb_get_retry 3 delay_before_retry 3 } } real_server 10.0.0.13 80 { weight 1 TCP_CHECK { connect_timeout 3 connect_timeout 80 nb_get_retry 3 delay_before_retry 3 } } } vrrp_strict #centos7里的keepalived有一个广播 这个需要删除 切记
7、启动keepalived,俩台服务器执行同样的操作
systemctl start keepalived
8、测试keepalived是否有vip漂移,先关掉主的keepalived,用ip a查看,如果有漂移则证明成功
10.0.0.12 执行代码
systemctl stop keepalived
10.0.0.13 查看ip a
[root@ localhost network-scripts]# ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet 10.0.0.100/32 brd 10.0.0.100 scope global lo:0 valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:27:e6:58 brd ff:ff:ff:ff:ff:ff inet 10.0.0.13/24 brd 10.0.0.255 scope global ens33 valid_lft forever preferred_lft forever inet 10.0.0.100/32 scope global ens33 valid_lft forever preferred_lft forever inet6 fe80::20c:29ff:fe27:e658/64 scope link valid_lft forever preferred_lft forever 3: ens37: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:27:e6:62 brd ff:ff:ff:ff:ff:ff inet6 fe80::20c:29ff:fe27:e662/64 scope link valid_lft forever preferred_lft forever
这个就是keepalived的vip漂移成功
9、配置俩台服务器的网卡,执行相同的操作
[root@ localhost ~]# cd /etc/sysconfig/network-scripts/ [root@ localhost network-scripts]# ls ifcfg-ens33 ifdown-eth ifdown-ppp ifup ifup-ipv6 ifup-routes init.ipv6-global ifcfg-ens37 ifdown-ib ifdown-routes ifup-aliases ifup-isdn ifup-sit network-functions ifcfg-lo ifdown-ippp ifdown-sit ifup-bnep ifup-plip ifup-Team network-functions-ipv6 ifcfg-lo:0 ifdown-ipv6 ifdown-Team ifup-eth ifup-plusb ifup-TeamPort ifdown ifdown-isdn ifdown-TeamPort ifup-ib ifup-post ifup-tunnel ifdown-bnep ifdown-post ifdown-tunnel ifup-ippp ifup-ppp ifup-wireless [root@ localhost network-scripts]# cp ifcfg-lo ifcfg-lo:0 [root@ localhost network-scripts]# vim ifcfg-lo:0 DEVICE=lo:0 IPADDR=10.0.0.100 NETMASK=255.255.255.255 ONBOOT=yes
10、重启网卡
systemctl restart network 或者 ifup ifcfg-lo:0
11、配置lvs,俩台服务器执行相同的操作
ipvsadm -A -t 10.0.0.100:80 -s rr ipvsadm -a -t 10.0.0.100:80 -r 10.0.0.12:80 -g ipvsadm -a -t 10.0.0.100:80 -r 10.0.0.13:80 -g echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce route add -host 10.0.0.100 dev lo:0
12、查看是否配置成功,俩台服务器执行相同的操作
[root@ localhost network-scripts]# ipvsadm -Ln IP Virtual Server version 1.2.1 (size=4096) Prot LocalAddress:Port Scheduler Flags -> RemoteAddress:Port Forward Weight ActiveConn InActConn TCP 10.0.0.100:80 rr -> 10.0.0.12:80 Route 1 0 0 -> 10.0.0.13:80 Route 1 0 0 TCP 127.0.0.1:80 rr [root@ localhost network-scripts]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.0.2 0.0.0.0 UG 0 0 0 ens33 10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 ens33 10.0.0.100 0.0.0.0 255.255.255.255 UH 0 0 0 lo 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 ens33 169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 ens37 172.16.0.0 0.0.0.0 255.255.0.0 U 0 0 0 ens37
13、更改nginx配置文件,并启动,俩台服务器执行相同的操作
[root@ localhost ~]# vim /etc/nginx/nginx.conf worker_processes 1; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; #tcp_nopush on; keepalive_timeout 0; #这里的keepalived长连接一定要改成0 #gzip on; include /etc/nginx/conf.d/*.conf; }
然后启动nginx
systemctl start nginx
14、更改nginx的index文件
10.0.0.12服务器 加上1111便于区分
[root@ localhost ~]# vim /usr/share/nginx/html/index.html <!DOCTYPE html> <html> <head> <title>Welcome to nginx!</title> <style> body { width: 35em; margin: 0 auto; font-family: Tahoma, Verdana, Arial, sans-serif; } </style> </head> <body> <h1>Welcome to nginx!1111</h1> #这里加上1111便于区分 <p>If you see this page, the nginx web server is successfully installed and working. Further configuration is required.</p> <p>For online documentation and support please refer to <a href="http://nginx.org/">nginx.org</a>.<br/> Commercial support is available at <a href="http://nginx.com/">nginx.com</a>.</p> <p><em>Thank you for using nginx.</em></p> </body> </html>
10.0.0.13服务器 加上2222便于区分
[root@ localhost ~]# vim /usr/share/nginx/html/index.html <!DOCTYPE html> <html> <head> <title>Welcome to nginx!</title> <style> body { width: 35em; margin: 0 auto; font-family: Tahoma, Verdana, Arial, sans-serif; } </style> </head> <body> <h1>Welcome to nginx!2222</h1> <p>If you see this page, the nginx web server is successfully installed and working. Further configuration is required.</p> <p>For online documentation and support please refer to <a href="http://nginx.org/">nginx.org</a>.<br/> Commercial support is available at <a href="http://nginx.com/">nginx.com</a>.</p> <p><em>Thank you for using nginx.</em></p> </body> </html>
15、访问IP地址,查看是否成功
单个访问成功,访问vip
成功!