Spring Boot属性文件配置文档（全部）

This sample file is meant as a guide only. Do not copy/paste the entire content into your application; rather pick only the properties that you need.

# ===================================================================
# COMMON SPRING BOOT PROPERTIES
#
# This sample file is provided as a guideline. Do NOT copy it in its
# entirety to your own application. ^^^
# ===================================================================

# ----------------------------------------
# CORE PROPERTIES
# ----------------------------------------

# BANNER
banner.charset=UTF-8 # Banner file encoding.
banner.location=classpath:banner.txt # Banner file location.
banner.image.location=classpath:banner.gif # Banner image file location (jpg/png can also be used).
banner.image.width= # Width of the banner image in chars (default 76)
banner.image.height= # Height of the banner image in chars (default based on image height)
banner.image.margin= # Left hand image margin in chars (default 2)
banner.image.invert= # If images should be inverted for dark terminal themes (default false)

# LOGGING
logging.config= # Location of the logging configuration file. For instance `classpath:logback.xml` for Logback
logging.exception-conversion-word=%wEx # Conversion word used when logging exceptions.
logging.file= # Log file name. For instance `myapp.log`
logging.level.*= # Log levels severity mapping. For instance `logging.level.org.springframework=DEBUG`
logging.path= # Location of the log file. For instance `/var/log`
logging.pattern.console= # Appender pattern for output to the console. Only supported with the default logback setup.
logging.pattern.file= # Appender pattern for output to the file. Only supported with the default logback setup.
logging.pattern.level= # Appender pattern for log level (default %5p). Only supported with the default logback setup.
logging.register-shutdown-hook=false # Register a shutdown hook for the logging system when it is initialized.

# AOP
spring.aop.auto=true # Add @EnableAspectJAutoProxy.
spring.aop.proxy-target-class= # Whether subclass-based (CGLIB) proxies are to be created (true) as opposed to standard Java interface-based proxies (false). Defaults to "true" when using Spring Transaction Management, otherwise "false".

# IDENTITY (ContextIdApplicationContextInitializer)
spring.application.index= # Application index.
spring.application.name= # Application name.

# ADMIN (SpringApplicationAdminJmxAutoConfiguration)
spring.application.admin.enabled=false # Enable admin features for the application.
spring.application.admin.jmx-name=org.springframework.boot:type=Admin,name=SpringApplication # JMX name of the application admin MBean.

# AUTO-CONFIGURATION
spring.autoconfigure.exclude= # Auto-configuration classes to exclude.

# SPRING CORE
spring.beaninfo.ignore=true # Skip search of BeanInfo classes.

# SPRING CACHE (CacheProperties)
spring.cache.cache-names= # Comma-separated list of cache names to create if supported by the underlying cache manager.
spring.cache.caffeine.spec= # The spec to use to create caches. Check CaffeineSpec for more details on the spec format.
spring.cache.couchbase.expiration=0 # Entry expiration in milliseconds. By default the entries never expire.
spring.cache.ehcache.config= # The location of the configuration file to use to initialize EhCache.
spring.cache.guava.spec= # The spec to use to create caches. Check CacheBuilderSpec for more details on the spec format.
spring.cache.infinispan.config= # The location of the configuration file to use to initialize Infinispan.
spring.cache.jcache.config= # The location of the configuration file to use to initialize the cache manager.
spring.cache.jcache.provider= # Fully qualified name of the CachingProvider implementation to use to retrieve the JSR-107 compliant cache manager. Only needed if more than one JSR-107 implementation is available on the classpath.
spring.cache.type= # Cache type, auto-detected according to the environment by default.

# SPRING CONFIG - using environment property only (ConfigFileApplicationListener)
spring.config.location= # Config file locations.
spring.config.name=application # Config file name.

# HAZELCAST (HazelcastProperties)
spring.hazelcast.config= # The location of the configuration file to use to initialize Hazelcast.

# PROJECT INFORMATION (ProjectInfoProperties)
spring.info.build.location=classpath:META-INF/build-info.properties # Location of the generated build-info.properties file.
spring.info.git.location=classpath:git.properties # Location of the generated git.properties file.

# JMX
spring.jmx.default-domain= # JMX domain name.
spring.jmx.enabled=true # Expose management beans to the JMX domain.
spring.jmx.server=mbeanServer # MBeanServer bean name.

# Email (MailProperties)
spring.mail.default-encoding=UTF-8 # Default MimeMessage encoding.
spring.mail.host= # SMTP server host. For instance `smtp.example.com`
spring.mail.jndi-name= # Session JNDI name. When set, takes precedence to others mail settings.
spring.mail.password= # Login password of the SMTP server.
spring.mail.port= # SMTP server port.
spring.mail.properties.*= # Additional JavaMail session properties.
spring.mail.protocol=smtp # Protocol used by the SMTP server.
spring.mail.test-connection=false # Test that the mail server is available on startup.
spring.mail.username= # Login user of the SMTP server.

# APPLICATION SETTINGS (SpringApplication)
spring.main.banner-mode=console # Mode used to display the banner when the application runs.
spring.main.sources= # Sources (class name, package name or XML resource location) to include in the ApplicationContext.
spring.main.web-environment= # Run the application in a web environment (auto-detected by default).

# FILE ENCODING (FileEncodingApplicationListener)
spring.mandatory-file-encoding= # Expected character encoding the application must use.

# INTERNATIONALIZATION (MessageSourceAutoConfiguration)
spring.messages.always-use-message-format=false # Set whether to always apply the MessageFormat rules, parsing even messages without arguments.
spring.messages.basename=messages # Comma-separated list of basenames, each following the ResourceBundle convention.
spring.messages.cache-seconds=-1 # Loaded resource bundle files cache expiration, in seconds. When set to -1, bundles are cached forever.
spring.messages.encoding=UTF-8 # Message bundles encoding.
spring.messages.fallback-to-system-locale=true # Set whether to fall back to the system Locale if no files for a specific Locale have been found.

# OUTPUT
spring.output.ansi.enabled=detect # Configure the ANSI output.

# PID FILE (ApplicationPidFileWriter)
spring.pid.fail-on-write-error= # Fail if ApplicationPidFileWriter is used but it cannot write the PID file.
spring.pid.file= # Location of the PID file to write (if ApplicationPidFileWriter is used).

# PROFILES
spring.profiles.active= # Comma-separated list (or list if using YAML) of active profiles.
spring.profiles.include= # Unconditionally activate the specified comma separated profiles (or list of profiles if using YAML).

# SENDGRID (SendGridAutoConfiguration)
spring.sendgrid.api-key= # SendGrid api key (alternative to username/password).
spring.sendgrid.username= # SendGrid account username.
spring.sendgrid.password= # SendGrid account password.
spring.sendgrid.proxy.host= # SendGrid proxy host.
spring.sendgrid.proxy.port= # SendGrid proxy port.

# ----------------------------------------
# WEB PROPERTIES
# ----------------------------------------

# EMBEDDED SERVER CONFIGURATION (ServerProperties)
server.address= # Network address to which the server should bind to.
server.compression.enabled=false # If response compression is enabled.
server.compression.excluded-user-agents= # List of user-agents to exclude from compression.
server.compression.mime-types=text/html,text/xml,text/plain,text/css,text/javascript,application/javascript # Comma-separated list of MIME types that should be compressed.
server.compression.min-response-size=2048 # Minimum response size that is required for compression to be performed.
server.connection-timeout= # Time in milliseconds that connectors will wait for another HTTP request before closing the connection. When not set, the connector's container-specific default will be used. Use a value of -1 to indicate no (i.e. infinite) timeout.
server.context-parameters.*= # Servlet context init parameters. For instance `server.context-parameters.a=alpha`
server.context-path= # Context path of the application.
server.display-name=application # Display name of the application.
server.max-http-header-size=0 # Maximum size in bytes of the HTTP message header.
server.error.include-stacktrace=never # When to include a "stacktrace" attribute.
server.error.path=/error # Path of the error controller.
server.error.whitelabel.enabled=true # Enable the default error page displayed in browsers in case of a server error.
server.jetty.acceptors= # Number of acceptor threads to use.
server.jetty.max-http-post-size=0 # Maximum size in bytes of the HTTP post or put content.
server.jetty.selectors= # Number of selector threads to use.
server.jsp-servlet.class-name=org.apache.jasper.servlet.JspServlet # The class name of the JSP servlet.
server.jsp-servlet.init-parameters.*= # Init parameters used to configure the JSP servlet
server.jsp-servlet.registered=true # Whether or not the JSP servlet is registered
server.port=8080 # Server HTTP port.
server.server-header= # Value to use for the Server response header (no header is sent if empty)
server.servlet-path=/ # Path of the main dispatcher servlet.
server.use-forward-headers= # If X-Forwarded-* headers should be applied to the HttpRequest.
server.session.cookie.comment= # Comment for the session cookie.
server.session.cookie.domain= # Domain for the session cookie.
server.session.cookie.http-only= # "HttpOnly" flag for the session cookie.
server.session.cookie.max-age= # Maximum age of the session cookie in seconds.
server.session.cookie.name= # Session cookie name.
server.session.cookie.path= # Path of the session cookie.
server.session.cookie.secure= # "Secure" flag for the session cookie.
server.session.persistent=false # Persist session data between restarts.
server.session.store-dir= # Directory used to store session data.
server.session.timeout= # Session timeout in seconds.
server.session.tracking-modes= # Session tracking modes (one or more of the following: "cookie", "url", "ssl").
server.ssl.ciphers= # Supported SSL ciphers.
server.ssl.client-auth= # Whether client authentication is wanted ("want") or needed ("need"). Requires a trust store.
server.ssl.enabled= # Enable SSL support.
server.ssl.enabled-protocols= # Enabled SSL protocols.
server.ssl.key-alias= # Alias that identifies the key in the key store.
server.ssl.key-password= # Password used to access the key in the key store.
server.ssl.key-store= # Path to the key store that holds the SSL certificate (typically a jks file).
server.ssl.key-store-password= # Password used to access the key store.
server.ssl.key-store-provider= # Provider for the key store.
server.ssl.key-store-type= # Type of the key store.
server.ssl.protocol=TLS # SSL protocol to use.
server.ssl.trust-store= # Trust store that holds SSL certificates.
server.ssl.trust-store-password= # Password used to access the trust store.
server.ssl.trust-store-provider= # Provider for the trust store.
server.ssl.trust-store-type= # Type of the trust store.
server.tomcat.accept-count= # Maximum queue length for incoming connection requests when all possible request processing threads are in use.
server.tomcat.accesslog.buffered=true # Buffer output such that it is only flushed periodically.
server.tomcat.accesslog.directory=logs # Directory in which log files are created. Can be relative to the tomcat base dir or absolute.
server.tomcat.accesslog.enabled=false # Enable access log.
server.tomcat.accesslog.file-date-format=.yyyy-MM-dd # Date format to place in log file name.
server.tomcat.accesslog.pattern=common # Format pattern for access logs.
server.tomcat.accesslog.prefix=access_log # Log file name prefix.
server.tomcat.accesslog.rename-on-rotate=false # Defer inclusion of the date stamp in the file name until rotate time.
server.tomcat.accesslog.request-attributes-enabled=false # Set request attributes for IP address, Hostname, protocol and port used for the request.
server.tomcat.accesslog.rotate=true # Enable access log rotation.
server.tomcat.accesslog.suffix=.log # Log file name suffix.
server.tomcat.additional-tld-skip-patterns= # Comma-separated list of additional patterns that match jars to ignore for TLD scanning.
server.tomcat.background-processor-delay=30 # Delay in seconds between the invocation of backgroundProcess methods.
server.tomcat.basedir= # Tomcat base directory. If not specified a temporary directory will be used.
server.tomcat.internal-proxies=10\\.\\d{1,3}\\.\\d{1,3}\\.\\d{1,3}|\\
192\\.168\\.\\d{1,3}\\.\\d{1,3}|\\
169\\.254\\.\\d{1,3}\\.\\d{1,3}|\\
127\\.\\d{1,3}\\.\\d{1,3}\\.\\d{1,3}|\\
172\\.1[6-9]{1}\\.\\d{1,3}\\.\\d{1,3}|\\
172\\.2[0-9]{1}\\.\\d{1,3}\\.\\d{1,3}|\\
172\\.3[0-1]{1}\\.\\d{1,3}\\.\\d{1,3} # regular expression matching trusted IP addresses.
server.tomcat.max-connections= # Maximum number of connections that the server will accept and process at any given time.
server.tomcat.max-http-post-size=0 # Maximum size in bytes of the HTTP post content.
server.tomcat.max-threads=0 # Maximum amount of worker threads.
server.tomcat.min-spare-threads=0 # Minimum amount of worker threads.
server.tomcat.port-header=X-Forwarded-Port # Name of the HTTP header used to override the original port value.
server.tomcat.protocol-header= # Header that holds the incoming protocol, usually named "X-Forwarded-Proto".
server.tomcat.protocol-header-https-value=https # Value of the protocol header that indicates that the incoming request uses SSL.
server.tomcat.redirect-context-root= # Whether requests to the context root should be redirected by appending a / to the path.
server.tomcat.remote-ip-header= # Name of the http header from which the remote ip is extracted. For instance `X-FORWARDED-FOR`
server.tomcat.uri-encoding=UTF-8 # Character encoding to use to decode the URI.
server.undertow.accesslog.dir= # Undertow access log directory.
server.undertow.accesslog.enabled=false # Enable access log.
server.undertow.accesslog.pattern=common # Format pattern for access logs.
server.undertow.accesslog.prefix=access_log. # Log file name prefix.
server.undertow.accesslog.rotate=true # Enable access log rotation.
server.undertow.accesslog.suffix=log # Log file name suffix.
server.undertow.buffer-size= # Size of each buffer in bytes.
server.undertow.direct-buffers= # Allocate buffers outside the Java heap.
server.undertow.io-threads= # Number of I/O threads to create for the worker.
server.undertow.max-http-post-size=0 # Maximum size in bytes of the HTTP post content.
server.undertow.worker-threads= # Number of worker threads.

# FREEMARKER (FreeMarkerAutoConfiguration)
spring.freemarker.allow-request-override=false # Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.
spring.freemarker.allow-session-override=false # Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.
spring.freemarker.cache=false # Enable template caching.
spring.freemarker.charset=UTF-8 # Template encoding.
spring.freemarker.check-template-location=true # Check that the templates location exists.
spring.freemarker.content-type=text/html # Content-Type value.
spring.freemarker.enabled=true # Enable MVC view resolution for this technology.
spring.freemarker.expose-request-attributes=false # Set whether all request attributes should be added to the model prior to merging with the template.
spring.freemarker.expose-session-attributes=false # Set whether all HttpSession attributes should be added to the model prior to merging with the template.
spring.freemarker.expose-spring-macro-helpers=true # Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".
spring.freemarker.prefer-file-system-access=true # Prefer file system access for template loading. File system access enables hot detection of template changes.
spring.freemarker.prefix= # Prefix that gets prepended to view names when building a URL.
spring.freemarker.request-context-attribute= # Name of the RequestContext attribute for all views.
spring.freemarker.settings.*= # Well-known FreeMarker keys which will be passed to FreeMarker's Configuration.
spring.freemarker.suffix=.ftl # Suffix that gets appended to view names when building a URL.
spring.freemarker.template-loader-path=classpath:/templates/ # Comma-separated list of template paths.
spring.freemarker.view-names= # White list of view names that can be resolved.

# GROOVY TEMPLATES (GroovyTemplateAutoConfiguration)
spring.groovy.template.allow-request-override=false # Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.
spring.groovy.template.allow-session-override=false # Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.
spring.groovy.template.cache= # Enable template caching.
spring.groovy.template.charset=UTF-8 # Template encoding.
spring.groovy.template.check-template-location=true # Check that the templates location exists.
spring.groovy.template.configuration.*= # See GroovyMarkupConfigurer
spring.groovy.template.content-type=test/html # Content-Type value.
spring.groovy.template.enabled=true # Enable MVC view resolution for this technology.
spring.groovy.template.expose-request-attributes=false # Set whether all request attributes should be added to the model prior to merging with the template.
spring.groovy.template.expose-session-attributes=false # Set whether all HttpSession attributes should be added to the model prior to merging with the template.
spring.groovy.template.expose-spring-macro-helpers=true # Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".
spring.groovy.template.prefix= # Prefix that gets prepended to view names when building a URL.
spring.groovy.template.request-context-attribute= # Name of the RequestContext attribute for all views.
spring.groovy.template.resource-loader-path=classpath:/templates/ # Template path.
spring.groovy.template.suffix=.tpl # Suffix that gets appended to view names when building a URL.
spring.groovy.template.view-names= # White list of view names that can be resolved.

# SPRING HATEOAS (HateoasProperties)
spring.hateoas.use-hal-as-default-json-media-type=true # Specify if application/hal+json responses should be sent to requests that accept application/json.

# HTTP message conversion
spring.http.converters.preferred-json-mapper=jackson # Preferred JSON mapper to use for HTTP message conversion. Set to "gson" to force the use of Gson when both it and Jackson are on the classpath.

# HTTP encoding (HttpEncodingProperties)
spring.http.encoding.charset=UTF-8 # Charset of HTTP requests and responses. Added to the "Content-Type" header if not set explicitly.
spring.http.encoding.enabled=true # Enable http encoding support.
spring.http.encoding.force= # Force the encoding to the configured charset on HTTP requests and responses.
spring.http.encoding.force-request= # Force the encoding to the configured charset on HTTP requests. Defaults to true when "force" has not been specified.
spring.http.encoding.force-response= # Force the encoding to the configured charset on HTTP responses.
spring.http.encoding.mapping= # Locale to Encoding mapping.

# MULTIPART (MultipartProperties)
spring.http.multipart.enabled=true # Enable support of multi-part uploads.
spring.http.multipart.file-size-threshold=0 # Threshold after which files will be written to disk. Values can use the suffixed "MB" or "KB" to indicate a Megabyte or Kilobyte size.
spring.http.multipart.location= # Intermediate location of uploaded files.
spring.http.multipart.max-file-size=1MB # Max file size. Values can use the suffixed "MB" or "KB" to indicate a Megabyte or Kilobyte size.
spring.http.multipart.max-request-size=10MB # Max request size. Values can use the suffixed "MB" or "KB" to indicate a Megabyte or Kilobyte size.
spring.http.multipart.resolve-lazily=false # Whether to resolve the multipart request lazily at the time of file or parameter access.

# JACKSON (JacksonProperties)
spring.jackson.date-format= # Date format string or a fully-qualified date format class name. For instance `yyyy-MM-dd HH:mm:ss`.
spring.jackson.default-property-inclusion= # Controls the inclusion of properties during serialization.
spring.jackson.deserialization.*= # Jackson on/off features that affect the way Java objects are deserialized.
spring.jackson.generator.*= # Jackson on/off features for generators.
spring.jackson.joda-date-time-format= # Joda date time format string. If not configured, "date-format" will be used as a fallback if it is configured with a format string.
spring.jackson.locale= # Locale used for formatting.
spring.jackson.mapper.*= # Jackson general purpose on/off features.
spring.jackson.parser.*= # Jackson on/off features for parsers.
spring.jackson.property-naming-strategy= # One of the constants on Jackson's PropertyNamingStrategy. Can also be a fully-qualified class name of a PropertyNamingStrategy subclass.
spring.jackson.serialization.*= # Jackson on/off features that affect the way Java objects are serialized.
spring.jackson.time-zone= # Time zone used when formatting dates. For instance `America/Los_Angeles`

# JERSEY (JerseyProperties)
spring.jersey.application-path= # Path that serves as the base URI for the application. Overrides the value of "@ApplicationPath" if specified.
spring.jersey.filter.order=0 # Jersey filter chain order.
spring.jersey.init.*= # Init parameters to pass to Jersey via the servlet or filter.
spring.jersey.servlet.load-on-startup=-1 # Load on startup priority of the Jersey servlet.
spring.jersey.type=servlet # Jersey integration type.

# SPRING LDAP (LdapProperties)
spring.ldap.urls= # LDAP URLs of the server.
spring.ldap.base= # Base suffix from which all operations should originate.
spring.ldap.username= # Login user of the server.
spring.ldap.password= # Login password of the server.
spring.ldap.base-environment.*= # LDAP specification settings.

# EMBEDDED LDAP (EmbeddedLdapProperties)
spring.ldap.embedded.base-dn= # The base DN
spring.ldap.embedded.credential.username= # Embedded LDAP username.
spring.ldap.embedded.credential.password= # Embedded LDAP password.
spring.ldap.embedded.ldif=classpath:schema.ldif # Schema (LDIF) script resource reference.
spring.ldap.embedded.port= # Embedded LDAP port.
spring.ldap.embedded.validation.enabled=true # Enable LDAP schema validation.
spring.ldap.embedded.validation.schema= # Path to the custom schema.

# SPRING MOBILE DEVICE VIEWS (DeviceDelegatingViewResolverAutoConfiguration)
spring.mobile.devicedelegatingviewresolver.enable-fallback=false # Enable support for fallback resolution.
spring.mobile.devicedelegatingviewresolver.enabled=false # Enable device view resolver.
spring.mobile.devicedelegatingviewresolver.mobile-prefix=mobile/ # Prefix that gets prepended to view names for mobile devices.
spring.mobile.devicedelegatingviewresolver.mobile-suffix= # Suffix that gets appended to view names for mobile devices.
spring.mobile.devicedelegatingviewresolver.normal-prefix= # Prefix that gets prepended to view names for normal devices.
spring.mobile.devicedelegatingviewresolver.normal-suffix= # Suffix that gets appended to view names for normal devices.
spring.mobile.devicedelegatingviewresolver.tablet-prefix=tablet/ # Prefix that gets prepended to view names for tablet devices.
spring.mobile.devicedelegatingviewresolver.tablet-suffix= # Suffix that gets appended to view names for tablet devices.

# SPRING MOBILE SITE PREFERENCE (SitePreferenceAutoConfiguration)
spring.mobile.sitepreference.enabled=true # Enable SitePreferenceHandler.

# MUSTACHE TEMPLATES (MustacheAutoConfiguration)
spring.mustache.allow-request-override= # Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.
spring.mustache.allow-session-override= # Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.
spring.mustache.cache= # Enable template caching.
spring.mustache.charset= # Template encoding.
spring.mustache.check-template-location= # Check that the templates location exists.
spring.mustache.content-type= # Content-Type value.
spring.mustache.enabled= # Enable MVC view resolution for this technology.
spring.mustache.expose-request-attributes= # Set whether all request attributes should be added to the model prior to merging with the template.
spring.mustache.expose-session-attributes= # Set whether all HttpSession attributes should be added to the model prior to merging with the template.
spring.mustache.expose-spring-macro-helpers= # Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".
spring.mustache.prefix=classpath:/templates/ # Prefix to apply to template names.
spring.mustache.request-context-attribute= # Name of the RequestContext attribute for all views.
spring.mustache.suffix=.html # Suffix to apply to template names.
spring.mustache.view-names= # White list of view names that can be resolved.

# SPRING MVC (WebMvcProperties)
spring.mvc.async.request-timeout= # Amount of time (in milliseconds) before asynchronous request handling times out.
spring.mvc.date-format= # Date format to use. For instance `dd/MM/yyyy`.
spring.mvc.dispatch-trace-request=false # Dispatch TRACE requests to the FrameworkServlet doService method.
spring.mvc.dispatch-options-request=true # Dispatch OPTIONS requests to the FrameworkServlet doService method.
spring.mvc.favicon.enabled=true # Enable resolution of favicon.ico.
spring.mvc.formcontent.putfilter.enabled=true # Enable Spring's HttpPutFormContentFilter.
spring.mvc.ignore-default-model-on-redirect=true # If the content of the "default" model should be ignored during redirect scenarios.
spring.mvc.locale= # Locale to use. By default, this locale is overridden by the "Accept-Language" header.
spring.mvc.locale-resolver=accept-header # Define how the locale should be resolved.
spring.mvc.log-resolved-exception=false # Enable warn logging of exceptions resolved by a "HandlerExceptionResolver".
spring.mvc.media-types.*= # Maps file extensions to media types for content negotiation.
spring.mvc.message-codes-resolver-format= # Formatting strategy for message codes. For instance `PREFIX_ERROR_CODE`.
spring.mvc.servlet.load-on-startup=-1 # Load on startup priority of the Spring Web Services servlet.
spring.mvc.static-path-pattern=/** # Path pattern used for static resources.
spring.mvc.throw-exception-if-no-handler-found=false # If a "NoHandlerFoundException" should be thrown if no Handler was found to process a request.
spring.mvc.view.prefix= # Spring MVC view prefix.
spring.mvc.view.suffix= # Spring MVC view suffix.

# SPRING RESOURCES HANDLING (ResourceProperties)
spring.resources.add-mappings=true # Enable default resource handling.
spring.resources.cache-period= # Cache period for the resources served by the resource handler, in seconds.
spring.resources.chain.cache=true # Enable caching in the Resource chain.
spring.resources.chain.enabled= # Enable the Spring Resource Handling chain. Disabled by default unless at least one strategy has been enabled.
spring.resources.chain.gzipped=false # Enable resolution of already gzipped resources.
spring.resources.chain.html-application-cache=false # Enable HTML5 application cache manifest rewriting.
spring.resources.chain.strategy.content.enabled=false # Enable the content Version Strategy.
spring.resources.chain.strategy.content.paths=/** # Comma-separated list of patterns to apply to the Version Strategy.
spring.resources.chain.strategy.fixed.enabled=false # Enable the fixed Version Strategy.
spring.resources.chain.strategy.fixed.paths=/** # Comma-separated list of patterns to apply to the Version Strategy.
spring.resources.chain.strategy.fixed.version= # Version string to use for the Version Strategy.
spring.resources.static-locations=classpath:/META-INF/resources/,classpath:/resources/,classpath:/static/,classpath:/public/ # Locations of static resources.

# SPRING SESSION (SessionProperties)
spring.session.hazelcast.flush-mode=on-save # Sessions flush mode.
spring.session.hazelcast.map-name=spring:session:sessions # Name of the map used to store sessions.
spring.session.jdbc.initializer.enabled= # Create the required session tables on startup if necessary. Enabled automatically if the default table name is set or a custom schema is configured.
spring.session.jdbc.schema=classpath:org/springframework/session/jdbc/schema-@@platform@@.sql # Path to the SQL file to use to initialize the database schema.
spring.session.jdbc.table-name=SPRING_SESSION # Name of database table used to store sessions.
spring.session.mongo.collection-name=sessions # Collection name used to store sessions.
spring.session.redis.flush-mode=on-save # Sessions flush mode.
spring.session.redis.namespace= # Namespace for keys used to store sessions.
spring.session.store-type= # Session store type.

# SPRING SOCIAL (SocialWebAutoConfiguration)
spring.social.auto-connection-views=false # Enable the connection status view for supported providers.

# SPRING SOCIAL FACEBOOK (FacebookAutoConfiguration)
spring.social.facebook.app-id= # your application's Facebook App ID
spring.social.facebook.app-secret= # your application's Facebook App Secret

# SPRING SOCIAL LINKEDIN (LinkedInAutoConfiguration)
spring.social.linkedin.app-id= # your application's LinkedIn App ID
spring.social.linkedin.app-secret= # your application's LinkedIn App Secret

# SPRING SOCIAL TWITTER (TwitterAutoConfiguration)
spring.social.twitter.app-id= # your application's Twitter App ID
spring.social.twitter.app-secret= # your application's Twitter App Secret

# THYMELEAF (ThymeleafAutoConfiguration)
spring.thymeleaf.cache=true # Enable template caching.
spring.thymeleaf.check-template=true # Check that the template exists before rendering it.
spring.thymeleaf.check-template-location=true # Check that the templates location exists.
spring.thymeleaf.content-type=text/html # Content-Type value.
spring.thymeleaf.enabled=true # Enable MVC Thymeleaf view resolution.
spring.thymeleaf.encoding=UTF-8 # Template encoding.
spring.thymeleaf.excluded-view-names= # Comma-separated list of view names that should be excluded from resolution.
spring.thymeleaf.mode=HTML5 # Template mode to be applied to templates. See also StandardTemplateModeHandlers.
spring.thymeleaf.prefix=classpath:/templates/ # Prefix that gets prepended to view names when building a URL.
spring.thymeleaf.suffix=.html # Suffix that gets appended to view names when building a URL.
spring.thymeleaf.template-resolver-order= # Order of the template resolver in the chain.
spring.thymeleaf.view-names= # Comma-separated list of view names that can be resolved.

# SPRING WEB SERVICES (WebServicesProperties)
spring.webservices.path=/services # Path that serves as the base URI for the services.
spring.webservices.servlet.init= # Servlet init parameters to pass to Spring Web Services.
spring.webservices.servlet.load-on-startup=-1 # Load on startup priority of the Spring Web Services servlet.

 

# ----------------------------------------
# SECURITY PROPERTIES
# ----------------------------------------
# SECURITY (SecurityProperties)
security.basic.authorize-mode=role # Security authorize mode to apply.
security.basic.enabled=true # Enable basic authentication.
security.basic.path=/** # Comma-separated list of paths to secure.
security.basic.realm=Spring # HTTP basic realm name.
security.enable-csrf=false # Enable Cross Site Request Forgery support.
security.filter-order=0 # Security filter chain order.
security.filter-dispatcher-types=ASYNC, FORWARD, INCLUDE, REQUEST # Security filter chain dispatcher types.
security.headers.cache=true # Enable cache control HTTP headers.
security.headers.content-security-policy= # Value for content security policy header.
security.headers.content-security-policy-mode=default # Content security policy mode.
security.headers.content-type=true # Enable "X-Content-Type-Options" header.
security.headers.frame=true # Enable "X-Frame-Options" header.
security.headers.hsts=all # HTTP Strict Transport Security (HSTS) mode (none, domain, all).
security.headers.xss=true # Enable cross site scripting (XSS) protection.
security.ignored= # Comma-separated list of paths to exclude from the default secured paths.
security.require-ssl=false # Enable secure channel for all requests.
security.sessions=stateless # Session creation policy (always, never, if_required, stateless).
security.user.name=user # Default user name.
security.user.password= # Password for the default user name. A random password is logged on startup by default.
security.user.role=USER # Granted roles for the default user name.

# SECURITY OAUTH2 CLIENT (OAuth2ClientProperties)
security.oauth2.client.client-id= # OAuth2 client id.
security.oauth2.client.client-secret= # OAuth2 client secret. A random secret is generated by default

# SECURITY OAUTH2 RESOURCES (ResourceServerProperties)
security.oauth2.resource.filter-order= # The order of the filter chain used to authenticate tokens.
security.oauth2.resource.id= # Identifier of the resource.
security.oauth2.resource.jwt.key-uri= # The URI of the JWT token. Can be set if the value is not available and the key is public.
security.oauth2.resource.jwt.key-value= # The verification key of the JWT token. Can either be a symmetric secret or PEM-encoded RSA public key.
security.oauth2.resource.jwk.key-set-uri= # The URI for getting the set of keys that can be used to validate the token.
security.oauth2.resource.prefer-token-info=true # Use the token info, can be set to false to use the user info.
security.oauth2.resource.service-id=resource #
security.oauth2.resource.token-info-uri= # URI of the token decoding endpoint.
security.oauth2.resource.token-type= # The token type to send when using the userInfoUri.
security.oauth2.resource.user-info-uri= # URI of the user endpoint.

# SECURITY OAUTH2 SSO (OAuth2SsoProperties)
security.oauth2.sso.filter-order= # Filter order to apply if not providing an explicit WebSecurityConfigurerAdapter
security.oauth2.sso.login-path=/login # Path to the login page, i.e. the one that triggers the redirect to the OAuth2 Authorization Server

# ----------------------------------------
# DATA PROPERTIES
# ----------------------------------------

# FLYWAY (FlywayProperties)
flyway.baseline-description= #
flyway.baseline-version=1 # version to start migration
flyway.baseline-on-migrate= #
flyway.check-location=false # Check that migration scripts location exists.
flyway.clean-on-validation-error= #
flyway.enabled=true # Enable flyway.
flyway.encoding= #
flyway.ignore-failed-future-migration= #
flyway.init-sqls= # SQL statements to execute to initialize a connection immediately after obtaining it.
flyway.locations=classpath:db/migration # locations of migrations scripts
flyway.out-of-order= #
flyway.password= # JDBC password if you want Flyway to create its own DataSource
flyway.placeholder-prefix= #
flyway.placeholder-replacement= #
flyway.placeholder-suffix= #
flyway.placeholders.*= #
flyway.schemas= # schemas to update
flyway.sql-migration-prefix=V #
flyway.sql-migration-separator= #
flyway.sql-migration-suffix=.sql #
flyway.table= #
flyway.url= # JDBC url of the database to migrate. If not set, the primary configured data source is used.
flyway.user= # Login user of the database to migrate.
flyway.validate-on-migrate= #

# LIQUIBASE (LiquibaseProperties)
liquibase.change-log=classpath:/db/changelog/db.changelog-master.yaml # Change log configuration path.
liquibase.check-change-log-location=true # Check the change log location exists.
liquibase.contexts= # Comma-separated list of runtime contexts to use.
liquibase.default-schema= # Default database schema.
liquibase.drop-first=false # Drop the database schema first.
liquibase.enabled=true # Enable liquibase support.
liquibase.labels= # Comma-separated list of runtime labels to use.
liquibase.parameters.*= # Change log parameters.
liquibase.password= # Login password of the database to migrate.
liquibase.rollback-file= # File to which rollback SQL will be written when an update is performed.
liquibase.url= # JDBC url of the database to migrate. If not set, the primary configured data source is used.
liquibase.user= # Login user of the database to migrate.

# COUCHBASE (CouchbaseProperties)
spring.couchbase.bootstrap-hosts= # Couchbase nodes (host or IP address) to bootstrap from.
spring.couchbase.bucket.name=default # Name of the bucket to connect to.
spring.couchbase.bucket.password= # Password of the bucket.
spring.couchbase.env.endpoints.key-value=1 # Number of sockets per node against the Key/value service.
spring.couchbase.env.endpoints.query=1 # Number of sockets per node against the Query (N1QL) service.
spring.couchbase.env.endpoints.view=1 # Number of sockets per node against the view service.
spring.couchbase.env.ssl.enabled= # Enable SSL support. Enabled automatically if a "keyStore" is provided unless specified otherwise.
spring.couchbase.env.ssl.key-store= # Path to the JVM key store that holds the certificates.
spring.couchbase.env.ssl.key-store-password= # Password used to access the key store.
spring.couchbase.env.timeouts.connect=5000 # Bucket connections timeout in milliseconds.
spring.couchbase.env.timeouts.key-value=2500 # Blocking operations performed on a specific key timeout in milliseconds.
spring.couchbase.env.timeouts.query=7500 # N1QL query operations timeout in milliseconds.
spring.couchbase.env.timeouts.socket-connect=1000 # Socket connect connections timeout in milliseconds.
spring.couchbase.env.timeouts.view=7500 # Regular and geospatial view operations timeout in milliseconds.

# DAO (PersistenceExceptionTranslationAutoConfiguration)
spring.dao.exceptiontranslation.enabled=true # Enable the PersistenceExceptionTranslationPostProcessor.

# CASSANDRA (CassandraProperties)
spring.data.cassandra.cluster-name= # Name of the Cassandra cluster.
spring.data.cassandra.compression=none # Compression supported by the Cassandra binary protocol.
spring.data.cassandra.connect-timeout-millis= # Socket option: connection time out.
spring.data.cassandra.consistency-level= # Queries consistency level.
spring.data.cassandra.contact-points=localhost # Comma-separated list of cluster node addresses.
spring.data.cassandra.fetch-size= # Queries default fetch size.
spring.data.cassandra.keyspace-name= # Keyspace name to use.
spring.data.cassandra.load-balancing-policy= # Class name of the load balancing policy.
spring.data.cassandra.port= # Port of the Cassandra server.
spring.data.cassandra.password= # Login password of the server.
spring.data.cassandra.read-timeout-millis= # Socket option: read time out.
spring.data.cassandra.reconnection-policy= # Reconnection policy class.
spring.data.cassandra.repositories.enabled= # Enable Cassandra repositories.
spring.data.cassandra.retry-policy= # Class name of the retry policy.
spring.data.cassandra.serial-consistency-level= # Queries serial consistency level.
spring.data.cassandra.schema-action=none # Schema action to take at startup.
spring.data.cassandra.ssl=false # Enable SSL support.
spring.data.cassandra.username= # Login user of the server.

# DATA COUCHBASE (CouchbaseDataProperties)
spring.data.couchbase.auto-index=false # Automatically create views and indexes.
spring.data.couchbase.consistency=read-your-own-writes # Consistency to apply by default on generated queries.
spring.data.couchbase.repositories.enabled=true # Enable Couchbase repositories.

# ELASTICSEARCH (ElasticsearchProperties)
spring.data.elasticsearch.cluster-name=elasticsearch # Elasticsearch cluster name.
spring.data.elasticsearch.cluster-nodes= # Comma-separated list of cluster node addresses. If not specified, starts a client node.
spring.data.elasticsearch.properties.*= # Additional properties used to configure the client.
spring.data.elasticsearch.repositories.enabled=true # Enable Elasticsearch repositories.

# DATA LDAP
spring.data.ldap.repositories.enabled=true # Enable LDAP repositories.

# MONGODB (MongoProperties)
spring.data.mongodb.authentication-database= # Authentication database name.
spring.data.mongodb.database=test # Database name.
spring.data.mongodb.field-naming-strategy= # Fully qualified name of the FieldNamingStrategy to use.
spring.data.mongodb.grid-fs-database= # GridFS database name.
spring.data.mongodb.host=localhost # Mongo server host. Cannot be set with uri.
spring.data.mongodb.password= # Login password of the mongo server. Cannot be set with uri.
spring.data.mongodb.port=27017 # Mongo server port. Cannot be set with uri.
spring.data.mongodb.repositories.enabled=true # Enable Mongo repositories.
spring.data.mongodb.uri=mongodb://localhost/test # Mongo database URI. Cannot be set with host, port and credentials.
spring.data.mongodb.username= # Login user of the mongo server. Cannot be set with uri.

# DATA REDIS
spring.data.redis.repositories.enabled=true # Enable Redis repositories.

# NEO4J (Neo4jProperties)
spring.data.neo4j.compiler= # Compiler to use.
spring.data.neo4j.embedded.enabled=true # Enable embedded mode if the embedded driver is available.
spring.data.neo4j.open-in-view=false # Register OpenSessionInViewInterceptor. Binds a Neo4j Session to the thread for the entire processing of the request.
spring.data.neo4j.password= # Login password of the server.
spring.data.neo4j.repositories.enabled=true # Enable Neo4j repositories.
spring.data.neo4j.uri= # URI used by the driver. Auto-detected by default.
spring.data.neo4j.username= # Login user of the server.

# DATA REST (RepositoryRestProperties)
spring.data.rest.base-path= # Base path to be used by Spring Data REST to expose repository resources.
spring.data.rest.default-page-size= # Default size of pages.
spring.data.rest.detection-strategy=default # Strategy to use to determine which repositories get exposed.
spring.data.rest.enable-enum-translation= # Enable enum value translation via the Spring Data REST default resource bundle.
spring.data.rest.limit-param-name= # Name of the URL query string parameter that indicates how many results to return at once.
spring.data.rest.max-page-size= # Maximum size of pages.
spring.data.rest.page-param-name= # Name of the URL query string parameter that indicates what page to return.
spring.data.rest.return-body-on-create= # Return a response body after creating an entity.
spring.data.rest.return-body-on-update= # Return a response body after updating an entity.
spring.data.rest.sort-param-name= # Name of the URL query string parameter that indicates what direction to sort results.

# SOLR (SolrProperties)
spring.data.solr.host=http://127.0.0.1:8983/solr # Solr host. Ignored if "zk-host" is set.
spring.data.solr.repositories.enabled=true # Enable Solr repositories.
spring.data.solr.zk-host= # ZooKeeper host address in the form HOST:PORT.

# DATASOURCE (DataSourceAutoConfiguration & DataSourceProperties)
spring.datasource.continue-on-error=false # Do not stop if an error occurs while initializing the database.
spring.datasource.data= # Data (DML) script resource references.
spring.datasource.data-username= # User of the database to execute DML scripts (if different).
spring.datasource.data-password= # Password of the database to execute DML scripts (if different).
spring.datasource.dbcp2.*= # Commons DBCP2 specific settings
spring.datasource.driver-class-name= # Fully qualified name of the JDBC driver. Auto-detected based on the URL by default.
spring.datasource.generate-unique-name=false # Generate a random datasource name.
spring.datasource.hikari.*= # Hikari specific settings
spring.datasource.initialize=true # Populate the database using 'data.sql'.
spring.datasource.jmx-enabled=false # Enable JMX support (if provided by the underlying pool).
spring.datasource.jndi-name= # JNDI location of the datasource. Class, url, username & password are ignored when set.
spring.datasource.name=testdb # Name of the datasource.
spring.datasource.password= # Login password of the database.
spring.datasource.platform=all # Platform to use in the DDL or DML scripts (e.g. schema-${platform}.sql or data-${platform}.sql).
spring.datasource.schema= # Schema (DDL) script resource references.
spring.datasource.schema-username= # User of the database to execute DDL scripts (if different).
spring.datasource.schema-password= # Password of the database to execute DDL scripts (if different).
spring.datasource.separator=; # Statement separator in SQL initialization scripts.
spring.datasource.sql-script-encoding= # SQL scripts encoding.
spring.datasource.tomcat.*= # Tomcat datasource specific settings
spring.datasource.type= # Fully qualified name of the connection pool implementation to use. By default, it is auto-detected from the classpath.
spring.datasource.url= # JDBC url of the database.
spring.datasource.username= # Login user of the database.
spring.datasource.xa.data-source-class-name= # XA datasource fully qualified name.
spring.datasource.xa.properties= # Properties to pass to the XA data source.

# JEST (Elasticsearch HTTP client) (JestProperties)
spring.elasticsearch.jest.connection-timeout=3000 # Connection timeout in milliseconds.
spring.elasticsearch.jest.multi-threaded=true # Enable connection requests from multiple execution threads.
spring.elasticsearch.jest.password= # Login password.
spring.elasticsearch.jest.proxy.host= # Proxy host the HTTP client should use.
spring.elasticsearch.jest.proxy.port= # Proxy port the HTTP client should use.
spring.elasticsearch.jest.read-timeout=3000 # Read timeout in milliseconds.
spring.elasticsearch.jest.uris=http://localhost:9200 # Comma-separated list of the Elasticsearch instances to use.
spring.elasticsearch.jest.username= # Login user.

# H2 Web Console (H2ConsoleProperties)
spring.h2.console.enabled=false # Enable the console.
spring.h2.console.path=/h2-console # Path at which the console will be available.
spring.h2.console.settings.trace=false # Enable trace output.
spring.h2.console.settings.web-allow-others=false # Enable remote access.

# JOOQ (JooqAutoConfiguration)
spring.jooq.sql-dialect= # SQLDialect JOOQ used when communicating with the configured datasource. For instance `POSTGRES`

# JPA (JpaBaseConfiguration, HibernateJpaAutoConfiguration)
spring.data.jpa.repositories.enabled=true # Enable JPA repositories.
spring.jpa.database= # Target database to operate on, auto-detected by default. Can be alternatively set using the "databasePlatform" property.
spring.jpa.database-platform= # Name of the target database to operate on, auto-detected by default. Can be alternatively set using the "Database" enum.
spring.jpa.generate-ddl=false # Initialize the schema on startup.
spring.jpa.hibernate.ddl-auto= # DDL mode. This is actually a shortcut for the "hibernate.hbm2ddl.auto" property. Default to "create-drop" when using an embedded database, "none" otherwise.
spring.jpa.hibernate.naming.implicit-strategy= # Hibernate 5 implicit naming strategy fully qualified name.
spring.jpa.hibernate.naming.physical-strategy= # Hibernate 5 physical naming strategy fully qualified name.
spring.jpa.hibernate.naming.strategy= # Hibernate 4 naming strategy fully qualified name. Not supported with Hibernate 5.
spring.jpa.hibernate.use-new-id-generator-mappings= # Use Hibernate's newer IdentifierGenerator for AUTO, TABLE and SEQUENCE.
spring.jpa.open-in-view=true # Register OpenEntityManagerInViewInterceptor. Binds a JPA EntityManager to the thread for the entire processing of the request.
spring.jpa.properties.*= # Additional native properties to set on the JPA provider.
spring.jpa.show-sql=false # Enable logging of SQL statements.

# JTA (JtaAutoConfiguration)
spring.jta.enabled=true # Enable JTA support.
spring.jta.log-dir= # Transaction logs directory.
spring.jta.transaction-manager-id= # Transaction manager unique identifier.

# ATOMIKOS (AtomikosProperties)
spring.jta.atomikos.connectionfactory.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool.
spring.jta.atomikos.connectionfactory.ignore-session-transacted-flag=true # Whether or not to ignore the transacted flag when creating session.
spring.jta.atomikos.connectionfactory.local-transaction-mode=false # Whether or not local transactions are desired.
spring.jta.atomikos.connectionfactory.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread.
spring.jta.atomikos.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.
spring.jta.atomikos.connectionfactory.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.
spring.jta.atomikos.connectionfactory.max-pool-size=1 # The maximum size of the pool.
spring.jta.atomikos.connectionfactory.min-pool-size=1 # The minimum size of the pool.
spring.jta.atomikos.connectionfactory.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit.
spring.jta.atomikos.connectionfactory.unique-resource-name=jmsConnectionFactory # The unique name used to identify the resource during recovery.
spring.jta.atomikos.datasource.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool.
spring.jta.atomikos.datasource.default-isolation-level= # Default isolation level of connections provided by the pool.
spring.jta.atomikos.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection.
spring.jta.atomikos.datasource.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread.
spring.jta.atomikos.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.
spring.jta.atomikos.datasource.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.
spring.jta.atomikos.datasource.max-pool-size=1 # The maximum size of the pool.
spring.jta.atomikos.datasource.min-pool-size=1 # The minimum size of the pool.
spring.jta.atomikos.datasource.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit.
spring.jta.atomikos.datasource.test-query= # SQL query or statement used to validate a connection before returning it.
spring.jta.atomikos.datasource.unique-resource-name=dataSource # The unique name used to identify the resource during recovery.
spring.jta.atomikos.properties.checkpoint-interval=500 # Interval between checkpoints.
spring.jta.atomikos.properties.default-jta-timeout=10000 # Default timeout for JTA transactions.
spring.jta.atomikos.properties.enable-logging=true # Enable disk logging.
spring.jta.atomikos.properties.force-shutdown-on-vm-exit=false # Specify if a VM shutdown should trigger forced shutdown of the transaction core.
spring.jta.atomikos.properties.log-base-dir= # Directory in which the log files should be stored.
spring.jta.atomikos.properties.log-base-name=tmlog # Transactions log file base name.
spring.jta.atomikos.properties.max-actives=50 # Maximum number of active transactions.
spring.jta.atomikos.properties.max-timeout=300000 # Maximum timeout (in milliseconds) that can be allowed for transactions.
spring.jta.atomikos.properties.serial-jta-transactions=true # Specify if sub-transactions should be joined when possible.
spring.jta.atomikos.properties.service= # Transaction manager implementation that should be started.
spring.jta.atomikos.properties.threaded-two-phase-commit=false # Use different (and concurrent) threads for two-phase commit on the participating resources.
spring.jta.atomikos.properties.transaction-manager-unique-name= # Transaction manager's unique name.

# BITRONIX
spring.jta.bitronix.connectionfactory.acquire-increment=1 # Number of connections to create when growing the pool.
spring.jta.bitronix.connectionfactory.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired.
spring.jta.bitronix.connectionfactory.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool.
spring.jta.bitronix.connectionfactory.allow-local-transactions=true # Whether or not the transaction manager should allow mixing XA and non-XA transactions.
spring.jta.bitronix.connectionfactory.apply-transaction-timeout=false # Whether or not the transaction timeout should be set on the XAResource when it is enlisted.
spring.jta.bitronix.connectionfactory.automatic-enlisting-enabled=true # Whether or not resources should be enlisted and delisted automatically.
spring.jta.bitronix.connectionfactory.cache-producers-consumers=true # Whether or not produces and consumers should be cached.
spring.jta.bitronix.connectionfactory.defer-connection-release=true # Whether or not the provider can run many transactions on the same connection and supports transaction interleaving.
spring.jta.bitronix.connectionfactory.ignore-recovery-failures=false # Whether or not recovery failures should be ignored.
spring.jta.bitronix.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.
spring.jta.bitronix.connectionfactory.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit.
spring.jta.bitronix.connectionfactory.min-pool-size=0 # The minimum size of the pool.
spring.jta.bitronix.connectionfactory.password= # The password to use to connect to the JMS provider.
spring.jta.bitronix.connectionfactory.share-transaction-connections=false # Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction.
spring.jta.bitronix.connectionfactory.test-connections=true # Whether or not connections should be tested when acquired from the pool.
spring.jta.bitronix.connectionfactory.two-pc-ordering-position=1 # The position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE).
spring.jta.bitronix.connectionfactory.unique-name=jmsConnectionFactory # The unique name used to identify the resource during recovery.
spring.jta.bitronix.connectionfactory.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources.
spring.jta.bitronix.connectionfactory.user= # The user to use to connect to the JMS provider.
spring.jta.bitronix.datasource.acquire-increment=1 # Number of connections to create when growing the pool.
spring.jta.bitronix.datasource.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired.
spring.jta.bitronix.datasource.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool.
spring.jta.bitronix.datasource.allow-local-transactions=true # Whether or not the transaction manager should allow mixing XA and non-XA transactions.
spring.jta.bitronix.datasource.apply-transaction-timeout=false # Whether or not the transaction timeout should be set on the XAResource when it is enlisted.
spring.jta.bitronix.datasource.automatic-enlisting-enabled=true # Whether or not resources should be enlisted and delisted automatically.
spring.jta.bitronix.datasource.cursor-holdability= # The default cursor holdability for connections.
spring.jta.bitronix.datasource.defer-connection-release=true # Whether or not the database can run many transactions on the same connection and supports transaction interleaving.
spring.jta.bitronix.datasource.enable-jdbc4-connection-test= # Whether or not Connection.isValid() is called when acquiring a connection from the pool.
spring.jta.bitronix.datasource.ignore-recovery-failures=false # Whether or not recovery failures should be ignored.
spring.jta.bitronix.datasource.isolation-level= # The default isolation level for connections.
spring.jta.bitronix.datasource.local-auto-commit= # The default auto-commit mode for local transactions.
spring.jta.bitronix.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection.
spring.jta.bitronix.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.
spring.jta.bitronix.datasource.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit.
spring.jta.bitronix.datasource.min-pool-size=0 # The minimum size of the pool.
spring.jta.bitronix.datasource.prepared-statement-cache-size=0 # The target size of the prepared statement cache. 0 disables the cache.
spring.jta.bitronix.datasource.share-transaction-connections=false # Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction.
spring.jta.bitronix.datasource.test-query= # SQL query or statement used to validate a connection before returning it.
spring.jta.bitronix.datasource.two-pc-ordering-position=1 # The position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE).
spring.jta.bitronix.datasource.unique-name=dataSource # The unique name used to identify the resource during recovery.
spring.jta.bitronix.datasource.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources.
spring.jta.bitronix.properties.allow-multiple-lrc=false # Allow multiple LRC resources to be enlisted into the same transaction.
spring.jta.bitronix.properties.asynchronous2-pc=false # Enable asynchronously execution of two phase commit.
spring.jta.bitronix.properties.background-recovery-interval-seconds=60 # Interval in seconds at which to run the recovery process in the background.
spring.jta.bitronix.properties.current-node-only-recovery=true # Recover only the current node.
spring.jta.bitronix.properties.debug-zero-resource-transaction=false # Log the creation and commit call stacks of transactions executed without a single enlisted resource.
spring.jta.bitronix.properties.default-transaction-timeout=60 # Default transaction timeout in seconds.
spring.jta.bitronix.properties.disable-jmx=false # Enable JMX support.
spring.jta.bitronix.properties.exception-analyzer= # Set the fully qualified name of the exception analyzer implementation to use.
spring.jta.bitronix.properties.filter-log-status=false # Enable filtering of logs so that only mandatory logs are written.
spring.jta.bitronix.properties.force-batching-enabled=true # Set if disk forces are batched.
spring.jta.bitronix.properties.forced-write-enabled=true # Set if logs are forced to disk.
spring.jta.bitronix.properties.graceful-shutdown-interval=60 # Maximum amount of seconds the TM will wait for transactions to get done before aborting them at shutdown time.
spring.jta.bitronix.properties.jndi-transaction-synchronization-registry-name= # JNDI name of the TransactionSynchronizationRegistry.
spring.jta.bitronix.properties.jndi-user-transaction-name= # JNDI name of the UserTransaction.
spring.jta.bitronix.properties.journal=disk # Name of the journal. Can be 'disk', 'null' or a class name.
spring.jta.bitronix.properties.log-part1-filename=btm1.tlog # Name of the first fragment of the journal.
spring.jta.bitronix.properties.log-part2-filename=btm2.tlog # Name of the second fragment of the journal.
spring.jta.bitronix.properties.max-log-size-in-mb=2 # Maximum size in megabytes of the journal fragments.
spring.jta.bitronix.properties.resource-configuration-filename= # ResourceLoader configuration file name.
spring.jta.bitronix.properties.server-id= # ASCII ID that must uniquely identify this TM instance. Default to the machine's IP address.
spring.jta.bitronix.properties.skip-corrupted-logs=false # Skip corrupted transactions log entries.
spring.jta.bitronix.properties.warn-about-zero-resource-transaction=true # Log a warning for transactions executed without a single enlisted resource.

# NARAYANA (NarayanaProperties)
spring.jta.narayana.default-timeout=60 # Transaction timeout in seconds.
spring.jta.narayana.expiry-scanners=com.arjuna.ats.internal.arjuna.recovery.ExpiredTransactionStatusManagerScanner # Comma-separated list of expiry scanners.
spring.jta.narayana.log-dir= # Transaction object store directory.
spring.jta.narayana.one-phase-commit=true # Enable one phase commit optimisation.
spring.jta.narayana.periodic-recovery-period=120 # Interval in which periodic recovery scans are performed in seconds.
spring.jta.narayana.recovery-backoff-period=10 # Back off period between first and second phases of the recovery scan in seconds.
spring.jta.narayana.recovery-db-pass= # Database password to be used by recovery manager.
spring.jta.narayana.recovery-db-user= # Database username to be used by recovery manager.
spring.jta.narayana.recovery-jms-pass= # JMS password to be used by recovery manager.
spring.jta.narayana.recovery-jms-user= # JMS username to be used by recovery manager.
spring.jta.narayana.recovery-modules= # Comma-separated list of recovery modules.
spring.jta.narayana.transaction-manager-id=1 # Unique transaction manager id.
spring.jta.narayana.xa-resource-orphan-filters= # Comma-separated list of orphan filters.

# EMBEDDED MONGODB (EmbeddedMongoProperties)
spring.mongodb.embedded.features=SYNC_DELAY # Comma-separated list of features to enable.
spring.mongodb.embedded.storage.database-dir= # Directory used for data storage.
spring.mongodb.embedded.storage.oplog-size= # Maximum size of the oplog in megabytes.
spring.mongodb.embedded.storage.repl-set-name= # Name of the replica set.
spring.mongodb.embedded.version=2.6.10 # Version of Mongo to use.

# REDIS (RedisProperties)
spring.redis.cluster.max-redirects= # Maximum number of redirects to follow when executing commands across the cluster.
spring.redis.cluster.nodes= # Comma-separated list of "host:port" pairs to bootstrap from.
spring.redis.database=0 # Database index used by the connection factory.
spring.redis.url= # Connection URL, will override host, port and password (user will be ignored), e.g. redis://user:password@example.com:6379
spring.redis.host=localhost # Redis server host.
spring.redis.password= # Login password of the redis server.
spring.redis.ssl=false # Enable SSL support.
spring.redis.pool.max-active=8 # Max number of connections that can be allocated by the pool at a given time. Use a negative value for no limit.
spring.redis.pool.max-idle=8 # Max number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections.
spring.redis.pool.max-wait=-1 # Maximum amount of time (in milliseconds) a connection allocation should block before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely.
spring.redis.pool.min-idle=0 # Target for the minimum number of idle connections to maintain in the pool. This setting only has an effect if it is positive.
spring.redis.port=6379 # Redis server port.
spring.redis.sentinel.master= # Name of Redis server.
spring.redis.sentinel.nodes= # Comma-separated list of host:port pairs.
spring.redis.timeout=0 # Connection timeout in milliseconds.

# TRANSACTION (TransactionProperties)
spring.transaction.default-timeout= # Default transaction timeout in seconds.
spring.transaction.rollback-on-commit-failure= # Perform the rollback on commit failures.

 

# ----------------------------------------
# INTEGRATION PROPERTIES
# ----------------------------------------

# ACTIVEMQ (ActiveMQProperties)
spring.activemq.broker-url= # URL of the ActiveMQ broker. Auto-generated by default.
spring.activemq.close-timeout=15000 # Time to wait, in milliseconds, before considering a close complete.
spring.activemq.in-memory=true # Specify if the default broker URL should be in memory. Ignored if an explicit broker has been specified.
spring.activemq.non-blocking-redelivery=false # Do not stop message delivery before re-delivering messages from a rolled back transaction. This implies that message order will not be preserved when this is enabled.
spring.activemq.password= # Login password of the broker.
spring.activemq.send-timeout=0 # Time to wait, in milliseconds, on Message sends for a response. Set it to 0 to indicate to wait forever.
spring.activemq.user= # Login user of the broker.
spring.activemq.packages.trust-all= # Trust all packages.
spring.activemq.packages.trusted= # Comma-separated list of specific packages to trust (when not trusting all packages).
spring.activemq.pool.block-if-full=true # Block when a connection is requested and the pool is full. Set it to false to throw a "JMSException" instead.
spring.activemq.pool.block-if-full-timeout=-1 # Blocking period, in milliseconds, before throwing an exception if the pool is still full.
spring.activemq.pool.create-connection-on-startup=true # Create a connection on startup. Can be used to warm-up the pool on startup.
spring.activemq.pool.enabled=false # Whether a PooledConnectionFactory should be created instead of a regular ConnectionFactory.
spring.activemq.pool.expiry-timeout=0 # Connection expiration timeout in milliseconds.
spring.activemq.pool.idle-timeout=30000 # Connection idle timeout in milliseconds.
spring.activemq.pool.max-connections=1 # Maximum number of pooled connections.
spring.activemq.pool.maximum-active-session-per-connection=500 # Maximum number of active sessions per connection.
spring.activemq.pool.reconnect-on-exception=true # Reset the connection when a "JMXException" occurs.
spring.activemq.pool.time-between-expiration-check=-1 # Time to sleep, in milliseconds, between runs of the idle connection eviction thread. When negative, no idle connection eviction thread runs.
spring.activemq.pool.use-anonymous-producers=true # Use only one anonymous "MessageProducer" instance. Set it to false to create one "MessageProducer" every time one is required.

# ARTEMIS (ArtemisProperties)
spring.artemis.embedded.cluster-password= # Cluster password. Randomly generated on startup by default.
spring.artemis.embedded.data-directory= # Journal file directory. Not necessary if persistence is turned off.
spring.artemis.embedded.enabled=true # Enable embedded mode if the Artemis server APIs are available.
spring.artemis.embedded.persistent=false # Enable persistent store.
spring.artemis.embedded.queues= # Comma-separated list of queues to create on startup.
spring.artemis.embedded.server-id= # Server id. By default, an auto-incremented counter is used.
spring.artemis.embedded.topics= # Comma-separated list of topics to create on startup.
spring.artemis.host=localhost # Artemis broker host.
spring.artemis.mode= # Artemis deployment mode, auto-detected by default.
spring.artemis.password= # Login password of the broker.
spring.artemis.port=61616 # Artemis broker port.
spring.artemis.user= # Login user of the broker.

# SPRING BATCH (BatchProperties)
spring.batch.initializer.enabled= # Create the required batch tables on startup if necessary. Enabled automatically if no custom table prefix is set or if a custom schema is configured.
spring.batch.job.enabled=true # Execute all Spring Batch jobs in the context on startup.
spring.batch.job.names= # Comma-separated list of job names to execute on startup (For instance `job1,job2`). By default, all Jobs found in the context are executed.
spring.batch.schema=classpath:org/springframework/batch/core/schema-@@platform@@.sql # Path to the SQL file to use to initialize the database schema.
spring.batch.table-prefix= # Table prefix for all the batch meta-data tables.

# JMS (JmsProperties)
spring.jms.jndi-name= # Connection factory JNDI name. When set, takes precedence to others connection factory auto-configurations.
spring.jms.listener.acknowledge-mode= # Acknowledge mode of the container. By default, the listener is transacted with automatic acknowledgment.
spring.jms.listener.auto-startup=true # Start the container automatically on startup.
spring.jms.listener.concurrency= # Minimum number of concurrent consumers.
spring.jms.listener.max-concurrency= # Maximum number of concurrent consumers.
spring.jms.pub-sub-domain=false # Specify if the default destination type is topic.
spring.jms.template.default-destination= # Default destination to use on send/receive operations that do not have a destination parameter.
spring.jms.template.delivery-delay= # Delivery delay to use for send calls in milliseconds.
spring.jms.template.delivery-mode= # Delivery mode. Enable QoS when set.
spring.jms.template.priority= # Priority of a message when sending. Enable QoS when set.
spring.jms.template.qos-enabled= # Enable explicit QoS when sending a message.
spring.jms.template.receive-timeout= # Timeout to use for receive calls in milliseconds.
spring.jms.template.time-to-live= # Time-to-live of a message when sending in milliseconds. Enable QoS when set.

# APACHE KAFKA (KafkaProperties)
spring.kafka.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster.
spring.kafka.client-id= # Id to pass to the server when making requests; used for server-side logging.
spring.kafka.consumer.auto-commit-interval= # Frequency in milliseconds that the consumer offsets are auto-committed to Kafka if 'enable.auto.commit' true.
spring.kafka.consumer.auto-offset-reset= # What to do when there is no initial offset in Kafka or if the current offset does not exist any more on the server.
spring.kafka.consumer.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster.
spring.kafka.consumer.client-id= # Id to pass to the server when making requests; used for server-side logging.
spring.kafka.consumer.enable-auto-commit= # If true the consumer's offset will be periodically committed in the background.
spring.kafka.consumer.fetch-max-wait= # Maximum amount of time in milliseconds the server will block before answering the fetch request if there isn't sufficient data to immediately satisfy the requirement given by "fetch.min.bytes".
spring.kafka.consumer.fetch-min-size= # Minimum amount of data the server should return for a fetch request in bytes.
spring.kafka.consumer.group-id= # Unique string that identifies the consumer group this consumer belongs to.
spring.kafka.consumer.heartbeat-interval= # Expected time in milliseconds between heartbeats to the consumer coordinator.
spring.kafka.consumer.key-deserializer= # Deserializer class for keys.
spring.kafka.consumer.max-poll-records= # Maximum number of records returned in a single call to poll().
spring.kafka.consumer.value-deserializer= # Deserializer class for values.
spring.kafka.listener.ack-count= # Number of records between offset commits when ackMode is "COUNT" or "COUNT_TIME".
spring.kafka.listener.ack-mode= # Listener AckMode; see the spring-kafka documentation.
spring.kafka.listener.ack-time= # Time in milliseconds between offset commits when ackMode is "TIME" or "COUNT_TIME".
spring.kafka.listener.concurrency= # Number of threads to run in the listener containers.
spring.kafka.listener.poll-timeout= # Timeout in milliseconds to use when polling the consumer.
spring.kafka.producer.acks= # Number of acknowledgments the producer requires the leader to have received before considering a request complete.
spring.kafka.producer.batch-size= # Number of records to batch before sending.
spring.kafka.producer.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster.
spring.kafka.producer.buffer-memory= # Total bytes of memory the producer can use to buffer records waiting to be sent to the server.
spring.kafka.producer.client-id= # Id to pass to the server when making requests; used for server-side logging.
spring.kafka.producer.compression-type= # Compression type for all data generated by the producer.
spring.kafka.producer.key-serializer= # Serializer class for keys.
spring.kafka.producer.retries= # When greater than zero, enables retrying of failed sends.
spring.kafka.producer.value-serializer= # Serializer class for values.
spring.kafka.properties.*= # Additional properties used to configure the client.
spring.kafka.ssl.key-password= # Password of the private key in the key store file.
spring.kafka.ssl.keystore-location= # Location of the key store file.
spring.kafka.ssl.keystore-password= # Store password for the key store file.
spring.kafka.ssl.truststore-location= # Location of the trust store file.
spring.kafka.ssl.truststore-password= # Store password for the trust store file.
spring.kafka.template.default-topic= # Default topic to which messages will be sent.

# RABBIT (RabbitProperties)
spring.rabbitmq.addresses= # Comma-separated list of addresses to which the client should connect.
spring.rabbitmq.cache.channel.checkout-timeout= # Number of milliseconds to wait to obtain a channel if the cache size has been reached.
spring.rabbitmq.cache.channel.size= # Number of channels to retain in the cache.
spring.rabbitmq.cache.connection.mode=channel # Connection factory cache mode.
spring.rabbitmq.cache.connection.size= # Number of connections to cache.
spring.rabbitmq.connection-timeout= # Connection timeout, in milliseconds; zero for infinite.
spring.rabbitmq.dynamic=true # Create an AmqpAdmin bean.
spring.rabbitmq.host=localhost # RabbitMQ host.
spring.rabbitmq.listener.simple.acknowledge-mode= # Acknowledge mode of container.
spring.rabbitmq.listener.simple.auto-startup=true # Start the container automatically on startup.
spring.rabbitmq.listener.simple.concurrency= # Minimum number of consumers.
spring.rabbitmq.listener.simple.default-requeue-rejected= # Whether or not to requeue delivery failures; default `true`.
spring.rabbitmq.listener.simple.idle-event-interval= # How often idle container events should be published in milliseconds.
spring.rabbitmq.listener.simple.max-concurrency= # Maximum number of consumers.
spring.rabbitmq.listener.simple.prefetch= # Number of messages to be handled in a single request. It should be greater than or equal to the transaction size (if used).
spring.rabbitmq.listener.simple.retry.enabled=false # Whether or not publishing retries are enabled.
spring.rabbitmq.listener.simple.retry.initial-interval=1000 # Interval between the first and second attempt to deliver a message.
spring.rabbitmq.listener.simple.retry.max-attempts=3 # Maximum number of attempts to deliver a message.
spring.rabbitmq.listener.simple.retry.max-interval=10000 # Maximum interval between attempts.
spring.rabbitmq.listener.simple.retry.multiplier=1.0 # A multiplier to apply to the previous delivery retry interval.
spring.rabbitmq.listener.simple.retry.stateless=true # Whether or not retry is stateless or stateful.
spring.rabbitmq.listener.simple.transaction-size= # Number of messages to be processed in a transaction. For best results it should be less than or equal to the prefetch count.
spring.rabbitmq.password= # Login to authenticate against the broker.
spring.rabbitmq.port=5672 # RabbitMQ port.
spring.rabbitmq.publisher-confirms=false # Enable publisher confirms.
spring.rabbitmq.publisher-returns=false # Enable publisher returns.
spring.rabbitmq.requested-heartbeat= # Requested heartbeat timeout, in seconds; zero for none.
spring.rabbitmq.ssl.enabled=false # Enable SSL support.
spring.rabbitmq.ssl.key-store= # Path to the key store that holds the SSL certificate.
spring.rabbitmq.ssl.key-store-password= # Password used to access the key store.
spring.rabbitmq.ssl.trust-store= # Trust store that holds SSL certificates.
spring.rabbitmq.ssl.trust-store-password= # Password used to access the trust store.
spring.rabbitmq.ssl.algorithm= # SSL algorithm to use. By default configure by the rabbit client library.
spring.rabbitmq.template.mandatory=false # Enable mandatory messages.
spring.rabbitmq.template.receive-timeout=0 # Timeout for `receive()` methods.
spring.rabbitmq.template.reply-timeout=5000 # Timeout for `sendAndReceive()` methods.
spring.rabbitmq.template.retry.enabled=false # Set to true to enable retries in the `RabbitTemplate`.
spring.rabbitmq.template.retry.initial-interval=1000 # Interval between the first and second attempt to publish a message.
spring.rabbitmq.template.retry.max-attempts=3 # Maximum number of attempts to publish a message.
spring.rabbitmq.template.retry.max-interval=10000 # Maximum number of attempts to publish a message.
spring.rabbitmq.template.retry.multiplier=1.0 # A multiplier to apply to the previous publishing retry interval.
spring.rabbitmq.username= # Login user to authenticate to the broker.
spring.rabbitmq.virtual-host= # Virtual host to use when connecting to the broker.

# ----------------------------------------
# ACTUATOR PROPERTIES
# ----------------------------------------

# ENDPOINTS (AbstractEndpoint subclasses)
endpoints.enabled=true # Enable endpoints.
endpoints.sensitive= # Default endpoint sensitive setting.
endpoints.actuator.enabled=true # Enable the endpoint.
endpoints.actuator.path= # Endpoint URL path.
endpoints.actuator.sensitive=false # Enable security on the endpoint.
endpoints.auditevents.enabled= # Enable the endpoint.
endpoints.auditevents.path= # Endpoint path.
endpoints.auditevents.sensitive=false # Enable security on the endpoint.
endpoints.autoconfig.enabled= # Enable the endpoint.
endpoints.autoconfig.id= # Endpoint identifier.
endpoints.autoconfig.path= # Endpoint path.
endpoints.autoconfig.sensitive= # Mark if the endpoint exposes sensitive information.
endpoints.beans.enabled= # Enable the endpoint.
endpoints.beans.id= # Endpoint identifier.
endpoints.beans.path= # Endpoint path.
endpoints.beans.sensitive= # Mark if the endpoint exposes sensitive information.
endpoints.configprops.enabled= # Enable the endpoint.
endpoints.configprops.id= # Endpoint identifier.
endpoints.configprops.keys-to-sanitize=password,secret,key,token,.*credentials.*,vcap_services # Keys that should be sanitized. Keys can be simple strings that the property ends with or regex expressions.
endpoints.configprops.path= # Endpoint path.
endpoints.configprops.sensitive= # Mark if the endpoint exposes sensitive information.
endpoints.docs.curies.enabled=false # Enable the curie generation.
endpoints.docs.enabled=true # Enable actuator docs endpoint.
endpoints.docs.path=/docs #
endpoints.docs.sensitive=false #
endpoints.dump.enabled= # Enable the endpoint.
endpoints.dump.id= # Endpoint identifier.
endpoints.dump.path= # Endpoint path.
endpoints.dump.sensitive= # Mark if the endpoint exposes sensitive information.
endpoints.env.enabled= # Enable the endpoint.
endpoints.env.id= # Endpoint identifier.
endpoints.env.keys-to-sanitize=password,secret,key,token,.*credentials.*,vcap_services # Keys that should be sanitized. Keys can be simple strings that the property ends with or regex expressions.
endpoints.env.path= # Endpoint path.
endpoints.env.sensitive= # Mark if the endpoint exposes sensitive information.
endpoints.flyway.enabled= # Enable the endpoint.
endpoints.flyway.id= # Endpoint identifier.
endpoints.flyway.sensitive= # Mark if the endpoint exposes sensitive information.
endpoints.health.enabled= # Enable the endpoint.
endpoints.health.id= # Endpoint identifier.
endpoints.health.mapping.*= # Mapping of health statuses to HTTP status codes. By default, registered health statuses map to sensible defaults (i.e. UP maps to 200).
endpoints.health.path= # Endpoint path.
endpoints.health.sensitive= # Mark if the endpoint exposes sensitive information.
endpoints.health.time-to-live=1000 # Time to live for cached result, in milliseconds.
endpoints.heapdump.enabled= # Enable the endpoint.
endpoints.heapdump.path= # Endpoint path.
endpoints.heapdump.sensitive= # Mark if the endpoint exposes sensitive information.
endpoints.hypermedia.enabled=false # Enable hypermedia support for endpoints.
endpoints.info.enabled= # Enable the endpoint.
endpoints.info.id= # Endpoint identifier.
endpoints.info.path= # Endpoint path.
endpoints.info.sensitive= # Mark if the endpoint exposes sensitive information.
endpoints.jolokia.enabled=true # Enable Jolokia endpoint.
endpoints.jolokia.path=/jolokia # Endpoint URL path.
endpoints.jolokia.sensitive=true # Enable security on the endpoint.
endpoints.liquibase.enabled= # Enable the endpoint.
endpoints.liquibase.id= # Endpoint identifier.
endpoints.liquibase.sensitive= # Mark if the endpoint exposes sensitive information.
endpoints.logfile.enabled=true # Enable the endpoint.
endpoints.logfile.external-file= # External Logfile to be accessed.
endpoints.logfile.path=/logfile # Endpoint URL path.
endpoints.logfile.sensitive=true # Enable security on the endpoint.
endpoints.loggers.enabled=true # Enable the endpoint.
endpoints.loggers.id= # Endpoint identifier.
endpoints.loggers.path=/logfile # Endpoint path.
endpoints.loggers.sensitive=true # Mark if the endpoint exposes sensitive information.
endpoints.mappings.enabled= # Enable the endpoint.
endpoints.mappings.id= # Endpoint identifier.
endpoints.mappings.path= # Endpoint path.
endpoints.mappings.sensitive= # Mark if the endpoint exposes sensitive information.
endpoints.metrics.enabled= # Enable the endpoint.
endpoints.metrics.filter.enabled=true # Enable the metrics servlet filter.
endpoints.metrics.filter.gauge-submissions=merged # Http filter gauge submissions (merged, per-http-method)
endpoints.metrics.filter.counter-submissions=merged # Http filter counter submissions (merged, per-http-method)
endpoints.metrics.id= # Endpoint identifier.
endpoints.metrics.path= # Endpoint path.
endpoints.metrics.sensitive= # Mark if the endpoint exposes sensitive information.
endpoints.shutdown.enabled= # Enable the endpoint.
endpoints.shutdown.id= # Endpoint identifier.
endpoints.shutdown.path= # Endpoint path.
endpoints.shutdown.sensitive= # Mark if the endpoint exposes sensitive information.
endpoints.trace.enabled= # Enable the endpoint.
endpoints.trace.filter.enabled=true # Enable the trace servlet filter.
endpoints.trace.id= # Endpoint identifier.
endpoints.trace.path= # Endpoint path.
endpoints.trace.sensitive= # Mark if the endpoint exposes sensitive information.

# ENDPOINTS CORS CONFIGURATION (EndpointCorsProperties)
endpoints.cors.allow-credentials= # Set whether credentials are supported. When not set, credentials are not supported.
endpoints.cors.allowed-headers= # Comma-separated list of headers to allow in a request. '*' allows all headers.
endpoints.cors.allowed-methods=GET # Comma-separated list of methods to allow. '*' allows all methods.
endpoints.cors.allowed-origins= # Comma-separated list of origins to allow. '*' allows all origins. When not set, CORS support is disabled.
endpoints.cors.exposed-headers= # Comma-separated list of headers to include in a response.
endpoints.cors.max-age=1800 # How long, in seconds, the response from a pre-flight request can be cached by clients.

# JMX ENDPOINT (EndpointMBeanExportProperties)
endpoints.jmx.domain= # JMX domain name. Initialized with the value of 'spring.jmx.default-domain' if set.
endpoints.jmx.enabled=true # Enable JMX export of all endpoints.
endpoints.jmx.static-names= # Additional static properties to append to all ObjectNames of MBeans representing Endpoints.
endpoints.jmx.unique-names=false # Ensure that ObjectNames are modified in case of conflict.

# JOLOKIA (JolokiaProperties)
jolokia.config.*= # See Jolokia manual

# MANAGEMENT HTTP SERVER (ManagementServerProperties)
management.add-application-context-header=true # Add the "X-Application-Context" HTTP header in each response.
management.address= # Network address that the management endpoints should bind to.
management.context-path= # Management endpoint context-path. For instance `/actuator`
management.cloudfoundry.enabled= # Enable extended Cloud Foundry actuator endpoints
management.cloudfoundry.skip-ssl-validation= # Skip SSL verification for Cloud Foundry actuator endpoint security calls
management.port= # Management endpoint HTTP port. Uses the same port as the application by default. Configure a different port to use management-specific SSL.
management.security.enabled=true # Enable security.
management.security.roles=ACTUATOR # Comma-separated list of roles that can access the management endpoint.
management.security.sessions=stateless # Session creating policy to use (always, never, if_required, stateless).
management.ssl.ciphers= # Supported SSL ciphers. Requires a custom management.port.
management.ssl.client-auth= # Whether client authentication is wanted ("want") or needed ("need"). Requires a trust store. Requires a custom management.port.
management.ssl.enabled= # Enable SSL support. Requires a custom management.port.
management.ssl.enabled-protocols= # Enabled SSL protocols. Requires a custom management.port.
management.ssl.key-alias= # Alias that identifies the key in the key store. Requires a custom management.port.
management.ssl.key-password= # Password used to access the key in the key store. Requires a custom management.port.
management.ssl.key-store= # Path to the key store that holds the SSL certificate (typically a jks file). Requires a custom management.port.
management.ssl.key-store-password= # Password used to access the key store. Requires a custom management.port.
management.ssl.key-store-provider= # Provider for the key store. Requires a custom management.port.
management.ssl.key-store-type= # Type of the key store. Requires a custom management.port.
management.ssl.protocol=TLS # SSL protocol to use. Requires a custom management.port.
management.ssl.trust-store= # Trust store that holds SSL certificates. Requires a custom management.port.
management.ssl.trust-store-password= # Password used to access the trust store. Requires a custom management.port.
management.ssl.trust-store-provider= # Provider for the trust store. Requires a custom management.port.
management.ssl.trust-store-type= # Type of the trust store. Requires a custom management.port.

# HEALTH INDICATORS
management.health.db.enabled=true # Enable database health check.
management.health.cassandra.enabled=true # Enable cassandra health check.
management.health.couchbase.enabled=true # Enable couchbase health check.
management.health.defaults.enabled=true # Enable default health indicators.
management.health.diskspace.enabled=true # Enable disk space health check.
management.health.diskspace.path= # Path used to compute the available disk space.
management.health.diskspace.threshold=0 # Minimum disk space that should be available, in bytes.
management.health.elasticsearch.enabled=true # Enable elasticsearch health check.
management.health.elasticsearch.indices= # Comma-separated index names.
management.health.elasticsearch.response-timeout=100 # The time, in milliseconds, to wait for a response from the cluster.
management.health.jms.enabled=true # Enable JMS health check.
management.health.ldap.enabled=true # Enable LDAP health check.
management.health.mail.enabled=true # Enable Mail health check.
management.health.mongo.enabled=true # Enable MongoDB health check.
management.health.rabbit.enabled=true # Enable RabbitMQ health check.
management.health.redis.enabled=true # Enable Redis health check.
management.health.solr.enabled=true # Enable Solr health check.
management.health.status.order=DOWN, OUT_OF_SERVICE, UP, UNKNOWN # Comma-separated list of health statuses in order of severity.

# INFO CONTRIBUTORS (InfoContributorProperties)
management.info.build.enabled=true # Enable build info.
management.info.defaults.enabled=true # Enable default info contributors.
management.info.env.enabled=true # Enable environment info.
management.info.git.enabled=true # Enable git info.
management.info.git.mode=simple # Mode to use to expose git information.

# REMOTE SHELL (ShellProperties)
management.shell.auth.type=simple # Authentication type. Auto-detected according to the environment.
management.shell.auth.jaas.domain=my-domain # JAAS domain.
management.shell.auth.key.path= # Path to the authentication key. This should point to a valid ".pem" file.
management.shell.auth.simple.user.name=user # Login user.
management.shell.auth.simple.user.password= # Login password.
management.shell.auth.spring.roles=ACTUATOR # Comma-separated list of required roles to login to the CRaSH console.
management.shell.command-path-patterns=classpath*:/commands/**,classpath*:/crash/commands/** # Patterns to use to look for commands.
management.shell.command-refresh-interval=-1 # Scan for changes and update the command if necessary (in seconds).
management.shell.config-path-patterns=classpath*:/crash/* # Patterns to use to look for configurations.
management.shell.disabled-commands=jpa*,jdbc*,jndi* # Comma-separated list of commands to disable.
management.shell.disabled-plugins= # Comma-separated list of plugins to disable. Certain plugins are disabled by default based on the environment.
management.shell.ssh.auth-timeout = # Number of milliseconds after user will be prompted to login again.
management.shell.ssh.enabled=true # Enable CRaSH SSH support.
management.shell.ssh.idle-timeout = # Number of milliseconds after which unused connections are closed.
management.shell.ssh.key-path= # Path to the SSH server key.
management.shell.ssh.port=2000 # SSH port.
management.shell.telnet.enabled=false # Enable CRaSH telnet support. Enabled by default if the TelnetPlugin is available.
management.shell.telnet.port=5000 # Telnet port.

# TRACING (TraceProperties)
management.trace.include=request-headers,response-headers,cookies,errors # Items to be included in the trace.

# METRICS EXPORT (MetricExportProperties)
spring.metrics.export.aggregate.key-pattern= # Pattern that tells the aggregator what to do with the keys from the source repository.
spring.metrics.export.aggregate.prefix= # Prefix for global repository if active.
spring.metrics.export.delay-millis=5000 # Delay in milliseconds between export ticks. Metrics are exported to external sources on a schedule with this delay.
spring.metrics.export.enabled=true # Flag to enable metric export (assuming a MetricWriter is available).
spring.metrics.export.excludes= # List of patterns for metric names to exclude. Applied after the includes.
spring.metrics.export.includes= # List of patterns for metric names to include.
spring.metrics.export.redis.key=keys.spring.metrics # Key for redis repository export (if active).
spring.metrics.export.redis.prefix=spring.metrics # Prefix for redis repository if active.
spring.metrics.export.send-latest= # Flag to switch off any available optimizations based on not exporting unchanged metric values.
spring.metrics.export.statsd.host= # Host of a statsd server to receive exported metrics.
spring.metrics.export.statsd.port=8125 # Port of a statsd server to receive exported metrics.
spring.metrics.export.statsd.prefix= # Prefix for statsd exported metrics.
spring.metrics.export.triggers.*= # Specific trigger properties per MetricWriter bean name.

# ----------------------------------------
# DEVTOOLS PROPERTIES
# ----------------------------------------

# DEVTOOLS (DevToolsProperties)
spring.devtools.livereload.enabled=true # Enable a livereload.com compatible server.
spring.devtools.livereload.port=35729 # Server port.
spring.devtools.restart.additional-exclude= # Additional patterns that should be excluded from triggering a full restart.
spring.devtools.restart.additional-paths= # Additional paths to watch for changes.
spring.devtools.restart.enabled=true # Enable automatic restart.
spring.devtools.restart.exclude=META-INF/maven/**,META-INF/resources/**,resources/**,static/**,public/**,templates/**,**/*Test.class,**/*Tests.class,git.properties # Patterns that should be excluded from triggering a full restart.
spring.devtools.restart.poll-interval=1000 # Amount of time (in milliseconds) to wait between polling for classpath changes.
spring.devtools.restart.quiet-period=400 # Amount of quiet time (in milliseconds) required without any classpath changes before a restart is triggered.
spring.devtools.restart.trigger-file= # Name of a specific file that when changed will trigger the restart check. If not specified any classpath file change will trigger the restart.

# REMOTE DEVTOOLS (RemoteDevToolsProperties)
spring.devtools.remote.context-path=/.~~spring-boot!~ # Context path used to handle the remote connection.
spring.devtools.remote.debug.enabled=true # Enable remote debug support.
spring.devtools.remote.debug.local-port=8000 # Local remote debug server port.
spring.devtools.remote.proxy.host= # The host of the proxy to use to connect to the remote application.
spring.devtools.remote.proxy.port= # The port of the proxy to use to connect to the remote application.
spring.devtools.remote.restart.enabled=true # Enable remote restart.
spring.devtools.remote.secret= # A shared secret required to establish a connection (required to enable remote support).
spring.devtools.remote.secret-header-name=X-AUTH-TOKEN # HTTP header used to transfer the shared secret.

# ----------------------------------------
# TESTING PROPERTIES
# ----------------------------------------

spring.test.database.replace=any # Type of existing DataSource to replace.
spring.test.mockmvc.print=default # MVC Print option.

＃================================================= ==================  

＃共同spring boot特性  

＃  

＃此示例文件作为指导提供。不要在其中复制它  

＃完整到您自己的应用程序。^^^  

＃================================================= ==================  

  

  

＃----------------------------------------  

＃核心属性  

＃----------------------------------------  

  

＃BANNER  

banner.charset = UTF-8＃横幅文件编码。  

banner.location = classpath：banner.txt＃横幅文件位置。  

  

＃记录  

logging.config =＃日志配置文件的位置。例如Logback的`classpath：logback.xml`  

logging.exception-conversion-word =％wEx＃记录异常时使用的转换字。  

logging.file =＃记录文件名称。例如`myapp.log`  

logging.level。* =＃日志级别严重性映射。例如`logging.level.org.springframework = DEBUG`  

logging.path =＃日志文件的位置。例如`/ var / log`  

logging.pattern.console =＃输出到控制台的Appender模式。仅支持默认的登录设置。  

logging.pattern.file =＃输出到文件的Appender模式。仅支持默认的登录设置。  

logging.pattern.level =＃日志级别的Appender模式（默认％5p）。仅支持默认的登录设置。  

logging.register-shutdown-hook = false＃为日志记录系统初始化时注册一个关闭钩子。  

  

＃AOP  

spring.aop.auto = true＃添加@EnableAspectJAutoProxy。  

spring.aop.proxy-target-class = false＃与基于Java接口的标准代理（false）相比，是否创建基于子类的（CGLIB）代理（true）。  

  

＃IDENTITY（ContextIdApplicationContextInitializer）  

spring.application.index =＃应用程序索引。  

spring.application.name =＃应用程序名称。  

  

＃ADMIN（SpringApplicationAdminJmxAutoConfiguration）  

spring.application.admin.enabled = false＃为应用程序启用管理功能。  

spring.application.admin.jmx-name = org.springframework.boot：type = Admin，name = SpringApplication＃JMX应用程序的名称admin MBean。  

  

＃自动配置  

spring.autoconfigure.exclude =＃要排除的自动配置类。  

  

＃弹簧芯  

spring.beaninfo.ignore = true＃跳过对BeanInfo类的搜索。  

  

＃SPRING CACHE（CacheProperties）  

spring.cache.cache-names =＃如果基础高速缓存管理器支持，将创建缓存名称的逗号分隔列表。  

spring.cache.ehcache.config =＃用于初始化EhCache的配置文件的位置。  

spring.cache.guava.spec =＃用于创建缓存的规范。检查CacheBuilderSpec以获取有关spec格式的更多详细信息。  

spring.cache.hazelcast.config =＃用于初始化Hazelcast的配置文件的位置。  

spring.cache.infinispan.config =＃用于初始化Infinispan的配置文件的位置。  

spring.cache.jcache.config =＃用于初始化缓存管理器的配置文件的位置。  

spring.cache.jcache.provider =＃用于检索符合JSR-107的缓存管理器的CachingProvider实现的完全限定名称。只有在类路径中有多个JSR-107实现可用时才需要。  

spring.cache.type =＃缓存类型，默认根据环境自动检测。  

  

＃SPRING CONFIG - 仅使用环境属性（ConfigFileApplicationListener）  

spring.config.location =＃配置文件位置。  

spring.config.name = application＃配置文件名。  

  

＃HAZELCAST（HazelcastProperties）  

spring.hazelcast.config =＃用于初始化Hazelcast的配置文件的位置。  

  

＃JMX  

spring.jmx.default-domain =＃JMX域名。  

spring.jmx.enabled = true＃将管理bean展示给JMX域。  

spring.jmx.server = mbeanServer＃MBeanServer bean名称。  

  

＃电子邮件（MailProperties）  

spring.mail.default-encoding = UTF-8＃默认MimeMessage编码。  

spring.mail.host =＃SMTP服务器主机。例如`smtp.example.com`  

spring.mail.jndi-name =＃会话JNDI名称。设置时，优先于其他邮件设置。  

spring.mail.password =＃登录SMTP服务器的密码。  

spring.mail.port =＃SMTP服务器端口。  

spring.mail.properties。* =＃其他JavaMail会话属性。  

spring.mail.protocol = smtp＃SMTP服务器使用的协议。  

spring.mail.test-connection = false＃测试邮件服务器在启动时是否可用。  

spring.mail.username =＃登录SMTP服务器的用户。  

  

＃应用程序设置（SpringApplication）  

spring.main.banner-mode = console＃用于在应用程序运行时显示横幅的模式。  

spring.main.sources =＃要包含在ApplicationContext中的源（类名，包名或XML资源位置）。  

spring.main.web-environment =＃在Web环境中运行应用程序（默认为自动检测）。  

  

＃FILE ENCODING（FileEncodingApplicationListener）  

spring.mandatory-file-encoding =＃应用程序必须使用的预期字符编码。  

  

＃国际化（MessageSourceAutoConfiguration）  

spring.messages.basename = messages＃逗号分隔的基本名称列表，每个都遵循ResourceBundle约定。  

spring.messages.cache-seconds = -1＃加载资源包文件缓存过期，以秒为单位。设置为-1时，捆绑包将永久缓存。  

spring.messages.encoding = UTF-8＃消息包编码。  

spring.messages.fallback-to-system-locale = true＃如果未找到特定语言环境的文件，则设置是否回退到系统区域设置。  

  

＃输出  

spring.output.ansi.enabled = detect＃配置ANSI输出（可以是“detect”，“always”，“never”）。  

  

＃PID文件（ApplicationPidFileWriter）  

spring.pid.fail-on-write-error =＃如果使用ApplicationPidFileWriter，则失败，但不能写入PID文件。  

spring.pid.file =＃要写入的PID文件的位置（如果使用ApplicationPidFileWriter）。  

  

＃个人资料  

spring.profiles.active =＃逗号分隔的活动配置文件列表。  

spring.profiles.include =＃无条件激活指定的逗号分隔的配置文件。  

  

＃SENDGRID（SendGridAutoConfiguration）  

spring.sendgrid.username =＃SendGrid帐户用户名  

spring.sendgrid.password =＃SendGrid帐号密码  

spring.sendgrid.proxy.host =＃SendGrid代理主机  

spring.sendgrid.proxy.port =＃SendGrid代理端口  

  

  

＃----------------------------------------  

＃网络属性  

＃----------------------------------------  

  

＃MULTIPART（多部分属性）  

multipart.enabled = true＃启用对多部分上传的支持。  

multipart.file-size-threshold = 0＃文件将写入磁盘之后的阈值。值可以使用后缀“MB”或“KB”来表示兆字节或千字节大小。  

multipart.location =＃上传文件的中间位置。  

multipart.max-file-size = 1Mb＃最大文件大小。值可以使用后缀“MB”或“KB”来表示兆字节或千字节大小。  

multipart.max-request-size = 10Mb＃最大请求大小。值可以使用后缀“MB”或“KB”来表示兆字节或千字节大小。  

  

＃嵌入式服务器配置（ServerProperties）  

server.address =＃服务器应绑定到的网络地址。  

server.compression.enabled = false＃如果启用了响应压缩。  

server.compression.excluded-user-agents =＃要从压缩中排除的用户代理列表。  

server.compression.mime-types =＃应该压缩的MIME类型的逗号分隔列表。例如`text / html，text / css，application / json`  

server.compression.min-response-size =＃要执行压缩所需的最小响应大小。例如2048  

server.context-parameters。* =＃Servlet上下文初始化参数。例如`server.context-parameters.a = alpha`  

server.context-path =＃应用程序的上下文路径。  

server.display-name = application＃显示应用程序的名称。  

server.error.include-stacktrace = never＃何时包含“stacktrace”属性。  

server.error.path = / error＃错误控制器的路径。  

server.error.whitelabel.enabled = true＃在服务器错误的情况下，启用浏览器中显示的默认错误页面。  

server.jsp-servlet.class-name = org.apache.jasper.servlet.JspServlet＃JSP servlet的类名称。  

server.jsp-servlet.init-parameters。* =＃用于配置JSP servlet的初始参数  

server.jsp-servlet.registered = true＃JSP servlet是否已注册  

server.port = 8080＃服务器HTTP端口。  

server.server-header =＃服务器响应头中发送的值（如果为空，则使用servlet容器默认值）  

server.servlet-path = /＃主调度程序servlet的路径。  

server.session.cookie.comment =＃会话cookie的注释。  

server.session.cookie.domain =＃会话cookie的域名。  

server.session.cookie.http-only =＃会话cookie的“HttpOnly”标志。  

server.session.cookie.max-age =＃以秒为单位的会话cookie的最大时间。  

server.session.cookie.name =＃会话cookie名称。  

server.session.cookie.path =＃会话cookie的路径。  

server.session.cookie.secure =＃会话cookie的“安全”标志。  

server.session.persistent = false＃在重新启动之间保留会话数据。  

server.session.store-dir =＃用于存储会话数据的目录。  

server.session.timeout =＃以秒为单位的会话超时。  

server.session.tracking-modes =＃会话跟踪模式（以下一项或多项：“cookie”，“url”，“ssl”）。  

server.ssl.ciphers =＃支持的SSL密码。  

server.ssl.client-auth =＃是否需要客户端身份验证（“需要”）或需要（“需要”）。需要信任商店。  

server.ssl.enabled =＃  

server.ssl.key-alias =＃  

server.ssl.key-password =＃  

server.ssl.key-store =＃  

server.ssl.key-store-password =＃  

server.ssl.key-store-provider =＃  

server.ssl.key-store-type =＃  

server.ssl.protocol =＃  

server.ssl.trust-store =＃  

server.ssl.trust-store-password =＃  

server.ssl.trust-store-provider =＃  

server.ssl.trust-store-type =＃  

server.tomcat.accesslog.directory = logs＃创建日志文件的目录。可以相对于tomcat的基本目录或绝对。  

server.tomcat.accesslog.enabled = false＃启用访问日志。  

server.tomcat.accesslog.pattern = common＃访问日志的格式模式。  

server.tomcat.accesslog.prefix = access_log＃记录文件名前缀。  

server.tomcat.accesslog.suffix = .log＃日志文件名后缀。  

server.tomcat.background-processor-delay = 30＃调用backgroundProcess方法之间的延迟（秒）。  

server.tomcat.basedir =＃Tomcat基本目录。如果未指定，则将使用临时目录。  

server.tomcat.internal-proxies= 10 \\ d {1,3} \\ d {1,3} \\ d {1,3} | \\  

        。192 \\ 168 \\ d {1,3} \\ d {1,3} | \\  

        。169 \\ 254 \\ d {1,3} \\ d {1,3} | \\  

        。127 \\ d {1,3} \\ d {1,3} \\ d {1,3} | \\  

        172 \\ 1 [6-9] {1} \\ d {1,3} \\ d {1,3} |。。\\  

        172 \\ 2 [0-9] {1} \\ d {1,3} \\ d {1,3} |。。\\  

        172 \\。3 [0-1] {1} \\。\\ d {1,3} \\。\\ d {1,3}＃匹配可信IP地址的正则表达式。  

server.tomcat.max-http-header-size = 0＃HTTP消息头的最大字节数。  

server.tomcat.max-threads = 0＃工作线程的最大数量。  

server.tomcat.port-header = X-Forwarded-Port＃用于覆盖原始端口值的HTTP标头的名称。  

server.tomcat.protocol-header =＃保存传入协议的头部，通常名为“X-Forwarded-Proto”。  

server.tomcat.protocol-header-https-value = https＃指示传入请求使用SSL的协议头的值。  

server.tomcat.remote-ip-header =＃从中提取远程IP的http头的名称。例如`X-FORWARDED-FOR`  

server.tomcat.uri-encoding = UTF-8＃用于解码URI的字符编码。  

server.undertow.accesslog.dir =＃取消访问日志目录。  

server.undertow.accesslog.enabled = false＃启用访问日志。  

server.undertow.accesslog.pattern = common＃访问日志的格式模式。  

server.undertow.buffer-size =＃每个缓冲区的大小（以字节为单位）。  

server.undertow.buffers-per-region =＃每个区域的缓冲区数量。  

server.undertow.direct-buffers =＃在Java堆外分配缓冲区。  

server.undertow.io-threads =＃为worker创建的I / O线程数量。  

server.undertow.worker-threads =＃工作线程数。  

server.use-forward-headers =＃如果X-Forwarded- *标头应该应用于HttpRequest。  

  

#FREEMARKER（FreeMarkerAutoConfiguration）  

spring.freemarker.allow-request-override = false＃设置是否允许HttpServletRequest属性覆盖（隐藏）具有相同名称的控制器生成的模型属性。  

spring.freemarker.allow-session-override = false＃设置是否允许HttpSession属性覆盖（隐藏）具有相同名称的控制器生成的模型属性。  

spring.freemarker.cache = false＃启用模板缓存。  

spring.freemarker.charset = UTF-8＃模板编码。  

spring.freemarker.check-template-location = true＃检查模板位置是否存在。  

spring.freemarker.content-type = text / html＃Content-Type值。  

spring.freemarker.enabled = true＃为此技术启用MVC视图分辨率。  

spring.freemarker.expose-request-attributes = false＃设置在与模板合并之前是否应将所有请求属性添加到模型中。  

spring.freemarker.expose-session-attributes = false＃设置在与模板合并之前是否应将所有HttpSession属性添加到模型中。  

spring.freemarker.expose-spring-macro-helpers = true＃设置是否公开名为“springMacroRequestContext”的供Spring的宏库使用的RequestContext。  

spring.freemarker.prefer-file-system-access = true＃优先选择模板加载的文件系统访问权限。文件系统访问使模板更改的热检测成为可能。  

spring.freemarker.prefix =＃构建URL时预先查看名称的前缀。  

spring.freemarker.request-context-attribute =＃所有视图的RequestContext属性的名称。  

spring.freemarker.settings.* =＃众所周知的FreeMarker键将被传递给FreeMarker的配置。  

spring.freemarker.suffix =＃在构建URL时被附加到查看名称的后缀。  

spring.freemarker.template-loader-path = classpath：/ templates /＃逗号分隔的模板路径列表。  

spring.freemarker.view-names =＃可以解析的视图名称的白名单。  

  

＃GROOVY模板（GroovyTemplateAutoConfiguration）  

spring.groovy.template.allow-request-override = false＃设置是否允许HttpServletRequest属性覆盖（隐藏）具有相同名称的控制器生成的模型属性。  

spring.groovy.template.allow-session-override = false＃设置是否允许HttpSession属性覆盖（隐藏）具有相同名称的控制器生成的模型属性。  

spring.groovy.template.cache =＃启用模板缓存。  

spring.groovy.template.charset = UTF-8＃模板编码。  

spring.groovy.template.check-template-location = true＃检查模板位置是否存在。  

spring.groovy.template.configuration。* =＃请参阅GroovyMarkupConfigurer  

spring.groovy.template.content-type = test / html＃Content-Type值。  

spring.groovy.template.enabled = true＃为此技术启用MVC视图分辨率。  

spring.groovy.template.expose-request-attributes = false＃设置在与模板合并之前是否应将所有请求属性添加到模型中。  

spring.groovy.template.expose-session-attributes = false＃设置在与模板合并之前是否应将所有HttpSession属性添加到模型中。  

spring.groovy.template.expose-spring-macro-helpers = true＃设置是否公开一个供Spring的宏库使用的名为“springMacroRequestContext”的RequestContext。  

spring.groovy.template.prefix =＃构建URL时预先查看名称的前缀。  

spring.groovy.template.request-context-attribute =＃所有视图的RequestContext属性的名称。  

spring.groovy.template.resource-loader-path = classpath：/ templates /＃模板路径。  

spring.groovy.template.suffix = .tpl＃在构建URL时被附加到视图名称后缀。  

spring.groovy.template.view-names =＃可以解析的视图名称的白名单。  

  

＃春天HATEOAS（Hateoas属性）  

spring.hateoas.use-hal-as-default-json-media-type = true＃指定应用程序/ hal + json响应是否应发送到接受application / json的请求。  

  

＃HTTP消息转换  

spring.http.converters.preferred-json-mapper = jackson＃用于HTTP消息转换的首选JSON映射器。设置为“gson”来强制使用Gson，当它和Jackson都在类路径中时。  

  

＃HTTP编码（HttpEncodingProperties）  

spring.http.encoding.charset = UTF-8＃HTTP请求和响应的字符集。如果未明确设置，则添加到“Content-Type”标题中。  

spring.http.encoding.enabled = true＃启用http编码支持。  

spring.http.encoding.force = true＃强制编码到HTTP请求和响应上配置的字符集。  

  

＃杰克逊（JacksonProperties）  

spring.jackson.date-format =＃日期格式字符串或完全合格的日期格式类名称。例如`yyyy-MM-dd HH：mm：ss`。  

spring.jackson.deserialization。* =＃杰克逊开/关功能，影响Java对象反序列化的方式。  

spring.jackson.generator。* =＃生成器的Jackson开/关功能。  

spring.jackson.joda-date-time-format =＃乔达日期时间格式字符串。如果未配置，如果使用格式字符串配置，则将使用“日期格式”作为后备。  

spring.jackson.locale =＃用于格式化的区域设置。  

spring.jackson.mapper。* =＃杰克逊通用开/关功能。  

spring.jackson.parser。* =＃解析器的Jackson开/关功能。  

spring.jackson.property-naming-strategy =＃Jackson的PropertyNamingStrategy上的常量之一。也可以是PropertyNamingStrategy子类的完全限定类名。  

spring.jackson.serialization。* =＃杰克逊开/关功能，影响Java对象序列化的方式。  

spring.jackson.serialization-inclusion =＃在序列化过程中控制属性的包含。使用Jackson的JsonInclude.Include枚举中的一个值进行配置。  

spring.jackson.time-zone =＃格式化日期时使用的时区。例如`America / Los_Angeles`  

  

＃泽西（JerseyProperties）  

spring.jersey.application-path =＃作为应用程序的基本URI的路径。如果指定，则覆盖“@ApplicationPath”的值。  

spring.jersey.filter.order = 0＃Jersey过滤器链顺序。  

spring.jersey.init。* =＃初始化参数通过servlet或过滤器传递给Jersey。  

spring.jersey.type = servlet＃Jersey集成类型。可以是“servlet”或“filter”。  

  

＃SPRING MOBILE DEVICE VIEWS（DeviceDelegatingViewResolverAutoConfiguration）  

spring.mobile.devicedelegatingviewresolver.enable-fallback = false＃启用对回退解析的支持。  

spring.mobile.devicedelegatingviewresolver.enabled = false＃启用设备视图解析器。  

spring.mobile.devicedelegatingviewresolver.mobile-prefix = mobile /＃预设为查看移动设备名称的前缀。  

spring.mobile.devicedelegatingviewresolver.mobile-suffix =＃附加到移动设备视图名称的后缀。  

spring.mobile.devicedelegatingviewresolver.normal-prefix =＃用于查看普通设备名称的前缀。  

spring.mobile.devicedelegatingviewresolver.normal-suffix =＃附加到正常设备的视图名称后缀。  

spring.mobile.devicedelegatingviewresolver.tablet-prefix = tablet /＃预设为查看平板设备名称的前缀。  

spring.mobile.devicedelegatingviewresolver.tablet-suffix =＃附加到平板设备的查看名称的后缀。  

  

＃SPRING MOBILE SITE PREFERENCE（SitePreferenceAutoConfiguration）  

spring.mobile.sitepreference.enabled = true＃启用SitePreferenceHandler。  

  

#MUSTACHE模板（MustacheAutoConfiguration）  

spring.mustache.cache = false＃启用模板缓存。  

spring.mustache.charset = UTF-8＃模板编码。  

spring.mustache.check-template-location = true＃检查模板位置是否存在。  

spring.mustache.content-type = text / html＃Content-Type值。  

spring.mustache.enabled = true＃启用此技术的MVC视图分辨率。  

spring.mustache.prefix = classpath：/ templates /＃应用于模板名称的前缀。  

spring.mustache.suffix = .html＃应用于模板名称的后缀。  

spring.mustache.view-names =＃可以解析的视图名称的白名单。  

  

＃SPRING MVC（WebMvcProperties）  

spring.mvc.async.request-timeout =＃异步请求处理超时之前的时间（以毫秒为单位）。  

spring.mvc.date-format =＃要使用的日期格式。例如`dd / MM / yyyy`。  

spring.mvc.dispatch-trace-request = false＃将TRACE请求分派给FrameworkServlet doService方法。  

spring.mvc.dispatch-options-request = false＃将OPTIONS请求分派给FrameworkServlet的doService方法。  

spring.mvc.favicon.enabled = true＃启用favicon.ico的解析。  

spring.mvc.formcontent.putfilter.enabled = true＃启用Spring的HttpPutFormContentFilter。  

spring.mvc.ignore-default-model-on-redirect = true＃如果在重定向场景中应忽略“默认”模型的内容。  

spring.mvc.locale =＃使用的语言环境。  

spring.mvc.media-types。* =＃将文件扩展名映射到媒体类型以进行内容协商。  

spring.mvc.message-codes-resolver-format =＃消息代码的格式化策略。例如`PREFIX_ERROR_CODE`。  

spring.mvc.static-path-pattern = / **＃用于静态资源的路径模式。  

spring.mvc.throw-exception-if-no-handler-found = false＃如果发现没有处理程序处理请求，则应抛出“NoHandlerFoundException”。  

spring.mvc.view.prefix =＃Spring MVC视图前缀。  

spring.mvc.view.suffix =＃Spring MVC视图后缀。  

  

＃春季资源处理（ResourceProperties）  

spring.resources.add-mappings = true＃启用默认资源处理。  

spring.resources.cache-period =＃资源处理程序服务的资源的缓存期，以秒为单位。  

spring.resources.chain.cache = true＃在资源链中启用缓存。  

spring.resources.chain.enabled =＃启用Spring资源处理链。默认情况下禁用，除非至少有一种策略已启用。  

spring.resources.chain.html-application-cache = false＃启用HTML5应用程序缓存清单重写。  

spring.resources.chain.strategy.content.enabled = false＃启用内容版本策略。  

spring.resources.chain.strategy.content.paths = / **＃应用于版本策略的逗号分隔的模式列表。  

spring.resources.chain.strategy.fixed.enabled = false＃启用固定版本策略。  

spring.resources.chain.strategy.fixed.paths =＃应用于版本策略的逗号分隔模式列表。  

spring.resources.chain.strategy.fixed.version =＃用于版本策略的版本字符串。  

spring.resources.static-locations = classpath：/ META-INF / resources /，classpath：/ resources /，classpath：/ static /，classpath：/ public /＃静态资源的位置。  

  

＃SPRING SOCIAL（SocialWebAutoConfiguration）  

spring.social.auto-connection-views = false＃为支持的提供商启用连接状态视图。  

  

＃SPRING SOCIAL FACEBOOK（FacebookAutoConfiguration）  

spring.social.facebook.app-id =＃您的应用程序的Facebook应用程序ID  

spring.social.facebook.app-secret =＃你的应用程序的Facebook App Secret  

  

＃SPRING SOCIAL LINKEDIN（LinkedInAutoConfiguration）  

spring.social.linkedin.app-id =＃您的应用程序的LinkedIn应用程序ID  

spring.social.linkedin.app-secret =＃你的应用的LinkedIn App Secret  

  

＃SPRING SOCIAL TWITTER（TwitterAutoConfiguration）  

spring.social.twitter.app-id =＃你的应用程序的Twitter应用程序ID  

spring.social.twitter.app-secret =＃你的应用程序的Twitter App Secret  

  

＃THYMELEAF（ThymeleafAutoConfiguration）  

spring.thymeleaf.cache = true＃启用模板缓存。  

spring.thymeleaf.check-template-location = true＃检查模板位置是否存在。  

spring.thymeleaf.content-type = text / html＃Content-Type值。  

spring.thymeleaf.enabled = true＃启用MVC Thymeleaf视图分辨率。  

spring.thymeleaf.encoding = UTF-8＃模板编码。  

spring.thymeleaf.excluded-view-names =＃应该从分辨率中排除的逗号分隔的视图名称列表。  

spring.thymeleaf.mode = HTML5＃应用于模板的模板模式。另请参阅StandardTemplateModeHandlers。  

spring.thymeleaf.prefix = classpath：/ templates /＃构建URL时预先查看名称的前缀。  

spring.thymeleaf.suffix = .html＃在构建URL时附加到视图名称的后缀。  

spring.thymeleaf.template-resolver-order =＃链中模板解析器的顺序。  

spring.thymeleaf.view-names =＃可以解析的视图名称的逗号分隔列表。  

  

＃速度模板（VelocityAutoConfiguration）  

spring.velocity.allow-request-override = false＃设置是否允许HttpServletRequest属性覆盖（隐藏）具有相同名称的控制器生成的模型属性。  

spring.velocity.allow-session-override = false＃设置是否允许HttpSession属性覆盖（隐藏）具有相同名称的控制器生成的模型属性。  

spring.velocity.cache =＃启用模板缓存。  

spring.velocity.charset = UTF-8＃模板编码。  

spring.velocity.check-template-location = true＃检查模板位置是否存在。  

spring.velocity.content-type = text / html＃Content-Type值。  

spring.velocity.date-tool-attribute =＃要在视图的Velocity上下文中公开的DateTool辅助对象的名称。  

spring.velocity.enabled = true＃为此技术启用MVC视图分辨率。  

spring.velocity.expose-request-attributes = false＃设置在与模板合并之前是否应将所有请求属性添加到模型中。  

spring.velocity.expose-session-attributes = false＃设置在与模板合并之前是否应将所有HttpSession属性添加到模型中。  

spring.velocity.expose-spring-macro-helpers = true＃设置是否公开名为“springMacroRequestContext”的供Spring的宏库使用的RequestContext。  

spring.velocity.number-tool-attribute =＃要在视图的Velocity上下文中公开的NumberTool帮助程序对象的名称。  

spring.velocity.prefer-file-system-access = true＃首选文件系统访问模板加载。文件系统访问使模板更改的热检测成为可能。  

spring.velocity.prefix =＃构建URL时预先查看名称的前缀。  

spring.velocity.properties.* =＃附加速度属性。  

spring.velocity.request-context-attribute =＃所有视图的RequestContext属性的名称。  

spring.velocity.resource-loader-path = classpath：/ templates /＃模板路径。  

spring.velocity.suffix = .vm＃构建URL时附加到视图名称的后缀。  

spring.velocity.toolbox-config-location =＃Velocity Toolbox配置位置。例如`/ WEB-INF / toolbox.xml`  

spring.velocity.view-names =＃可以解析的视图名称的白名单。  

  

  

  

＃----------------------------------------  

＃安全特性  

＃----------------------------------------  

＃安全（SecurityProperties）  

security.basic.authorize-mode = role＃安全授权模式。  

security.basic.enabled = true＃启用基本认证。  

security.basic.path = / **＃以逗号分隔的安全路径列表。  

security.basic.realm = Spring＃HTTP基本领域名称。  

security.enable-csrf = false＃启用跨站点请求伪造支持。  

security.filter-order = 0＃安全过滤器链顺序。  

security.filter-dispatcher-types = ASYNC，FORWARD，INCLUDE，REQUEST＃安全性筛选器链调度程序类型。  

security.headers.cache = true＃启用缓存控制HTTP标头。  

security.headers.content-type = true＃启用“X-Content-Type-Options”标题。  

security.headers.frame = true＃启用“X-Frame-Options”标题。  

security.headers.hsts =＃HTTP严格传输安全（HSTS）模式（无，域，全部）。  

security.headers.xss = true＃启用跨站点脚本（XSS）保护。  

security.ignored =＃从逗号分隔的默认安全路径中排除的路径列表。  

security.require-ssl = false＃为所有请求启用安全通道。  

security.sessions =无状态＃会话创建策略（永远，从不，if_required，无状态）。  

security.user.name = user＃默认用户名。  

security.user.password =＃默认用户名的密码。默认情况下会在启动时记录随机密码。  

security.user.role = USER＃授予默认用户名的角色。  

  

＃SECURITY OAUTH2客户端（OAuth2ClientProperties  

security.oauth2.client.client-id =＃OAuth2客户端ID。  

security.oauth2.client.client-secret =＃OAuth2客户端密钥。随机秘密是默认生成的  

  

＃SECURITY OAUTH2 RESOURCES（ResourceServerProperties  

security.oauth2.resource.id =＃资源的标识符。  

security.oauth2.resource.jwt.key-uri =＃JWT令牌的URI。如果该值不可用并且密钥是公开的，可以设置。  

security.oauth2.resource.jwt.key-value =＃JWT令牌的验证密钥。可以是对称密钥或PEM编码的RSA公钥。  

security.oauth2.resource.prefer-token-info = true＃使用token info，可以设置为false来使用用户信息。  

security.oauth2.resource.service-id =资源＃  

security.oauth2.resource.token-info-uri =＃令牌解码端点的URI。  

security.oauth2.resource.token-type =＃使用userInfoUri时要发送的令牌类型。  

security.oauth2.resource.user-info-uri =＃用户端点的URI。  

  

＃SECURITY OAUTH2 SSO（OAuth2SsoProperties  

security.oauth2.sso.filter-order =＃如果不提供显式的WebSecurityConfigurerAdapter  

security.oauth2.sso.login-path = / login＃登录页面的路径，即触发重定向到OAuth2授权服务器的路径  

  

  

＃----------------------------------------  

＃数据属性  

＃----------------------------------------  

  

＃FLYWAY（FlywayProperties）  

flyway.baseline-description =＃  

flyway.baseline-version = 1＃版本开始迁移  

flyway.baseline-on-migrate =＃  

flyway.check-location = false＃检查是否存在迁移脚本位置。  

flyway.clean-on-validation-error =＃  

flyway.enabled = true＃启用飞路。  

flyway.encoding =＃  

flyway.ignore-failed-future-migration =＃  

flyway.init-sqls =＃SQL语句在获取它之后立即执行以初始化连接。  

flyway.locations = classpath：db / migration＃迁移脚本的位置  

flyway.out-of-order =＃  

flyway.password =＃如果您希望Flyway创建自己的DataSource，则使用JDBC密码  

flyway.placeholder-prefix =＃  

flyway.placeholder-replacement =＃  

flyway.placeholder-suffix =＃  

flyway.placeholders。* =＃  

flyway.schemas =＃模式更新  

flyway.sql-migration-prefix = V＃  

flyway.sql-migration-separator =＃  

flyway.sql-migration-suffix = .sql＃  

flyway.table =＃  

flyway.url =＃要迁移的数据库的JDBC URL。如果未设置，则使用主要配置的数据源。  

flyway.user =＃登录要迁移的数据库的用户。  

flyway.validate-on-migrate =＃  

  

＃LIQUIBASE（LiquibaseProperties）  

liquibase.change-log = classpath：/db/changelog/db.changelog-master.yaml＃更改日志配置路径。  

liquibase.check-change-log-location = true＃检查更改日志位置是否存在。  

liquibase.contexts =＃使用运行时上下文的逗号分隔列表。  

liquibase.default-schema =＃默认数据库模式。  

liquibase.drop-first = false＃首先删除数据库模式。  

liquibase.enabled = true＃启用liquibase支持。  

liquibase.labels =＃使用运行时标签的逗号分隔列表。  

liquibase.parameters。* =＃更改日志参数。  

liquibase.password =＃登录要迁移的数据库的密码。  

liquibase.url =＃要迁移的数据库的JDBC URL。如果未设置，则使用主要配置的数据源。  

liquibase.user =＃登录要迁移的数据库的用户。  

  

＃DAO（PersistenceExceptionTranslationAutoConfiguration）  

spring.dao.exceptiontranslation.enabled = true＃启用PersistenceExceptionTranslationPostProcessor。  

  

＃CASSANDRA（CassandraProperties）  

spring.data.cassandra.cluster-name =＃Cassandra集群的名称。  

spring.data.cassandra.compression =＃Cassandra二进制协议支持的压缩。  

spring.data.cassandra.connect-timeout-millis =＃套接字选项：连接超时。  

spring.data.cassandra.consistency-level =＃查询一致性级别。  

spring.data.cassandra.contact-points = localhost＃群集节点地址的逗号分隔列表。  

spring.data.cassandra.fetch-size =＃查询默认获取大小。  

spring.data.cassandra.keyspace-name =＃使用的Keyspace名称。  

spring.data.cassandra.load-balancing-policy =＃负载均衡策略的类名称。  

spring.data.cassandra.port =＃Cassandra服务器的端口。  

spring.data.cassandra.password =＃登录服务器的密码。  

spring.data.cassandra.read-timeout-millis =＃套接字选项：读取超时。  

spring.data.cassandra.reconnection-policy =＃重新连接策略类。  

spring.data.cassandra.retry-policy =＃重试策略的类名称。  

spring.data.cassandra.serial-consistency-level =＃查询串行一致性级别。  

spring.data.cassandra.ssl = false＃启用SSL支持。  

spring.data.cassandra.username =＃服务器的登录用户。  

  

＃ELASTICSEARCH（ElasticsearchProperties）  

spring.data.elasticsearch.cluster-name = elasticsearch＃Elasticsearch集群名称。  

spring.data.elasticsearch.cluster-nodes =＃以逗号分隔的集群节点地址列表。如果未指定，则启动客户机节点。  

spring.data.elasticsearch.properties。* =＃用于配置客户端的其他属性。  

spring.data.elasticsearch.repositories.enabled = true＃启用Elasticsearch存储库。  

  

＃MONGODB（MongoProperties）  

spring.data.mongodb.authentication-database =＃认证数据库名称。  

spring.data.mongodb.database = test＃数据库名称。  

spring.data.mongodb.field -naming-strategy =＃要使用的FieldNamingStrategy的完全限定名称。  

spring.data.mongodb.grid-fs-database =＃GridFS数据库名称。  

spring.data.mongodb.host = localhost＃Mongo服务器主机。  

spring.data.mongodb.password =＃登录mongo服务器的密码。  

spring.data.mongodb.port = 27017＃Mongo服务器端口。  

spring.data.mongodb.repositories.enabled = true＃启用Mongo存储库。  

spring.data.mongodb.uri = mongodb：// localhost / test＃Mongo数据库URI。设置时，主机和端口将被忽略。  

spring.data.mongodb.username =＃mongo服务器的登录用户。  

  

＃数据REST（RepositoryRestProperties）  

spring.data.rest.base-path =＃Spring Data REST用于公开资源库资源的基本路径。  

spring.data.rest.default-page-size =＃页面的默认大小。  

spring.data.rest.enable-enum-translation =＃通过Spring Data REST默认资源包启用枚举值转换。  

spring.data.rest.limit-param-name =＃URL查询字符串参数的名称，表示一次返回多少个结果。  

spring.data.rest.max-page-size =＃页面的最大尺寸。  

spring.data.rest.page-param-name =＃指示要返回哪个页面的URL查询字符串参数的名称。  

spring.data.rest.return-body-on-create =＃创建实体后返回响应主体。  

spring.data.rest.return-body-on-update =＃更新实体后返回响应主体。  

spring.data.rest.sort-param-name =＃指示排序结果的方向的URL查询字符串参数的名称。  

  

＃SOLR（SolrProperties）  

spring.data.solr.host = http：//127.0.0.1：8983 / solr＃Solr主机。如果设置了“zk-host”，则忽略。  

spring.data.solr.repositories.enabled = true＃启用Solr存储库。  

spring.data.solr.zk-host =＃HOST：PORT形式的＃ZooKeeper主机地址。  

  

＃DATASOURCE（DataSourceAutoConfiguration＆DataSourceProperties）  

spring.datasource.continue-on-error = false＃如果在初始化数据库时发生错误，请不要停止。  

spring.datasource.data =＃数据（DML）脚本资源参考。  

spring.datasource.driver-class-name =＃JDBC驱动程序的完全限定名称。默认情况下基于URL自动检测。  

spring.datasource.initialize = true＃使用'data.sql'填充数据库。  

spring.datasource.jmx-enabled = false＃启用JMX支持（如果由底层池提供）。  

spring.datasource.jndi-name =＃数据源的JNDI位置。设置时会忽略类，网址，用户名和密码。  

spring.datasource.max-active =＃例如100  

spring.datasource.max-idle =＃例如8  

spring.datasource.max等待=  

spring.datasource.min-evictable空闲时间-米利斯=  

spring.datasource.min空闲= 8  

spring.datasource.name = testdb＃数据源的名称。  

spring.datasource.password =＃登录数据库的密码。  

spring.datasource.platform = all＃架构资源中使用的平台（架构 - $ {platform} .sql）。  

spring.datasource.schema =＃架构（DDL）脚本资源引用。  

spring.datasource.separator =; ＃SQL初始化脚本中的语句分隔符。  

spring.datasource.sql-script-encoding =＃SQL脚本编码。  

spring.datasource.test-on-borrow =＃例如`false`  

spring.datasource.test-on-return =＃例如`false`  

spring.datasource.test-while-idle =＃  

spring.datasource.time-between-eviction-runs-millis = 1  

spring.datasource.type =＃要使用的连接池实现的完全限定名称。默认情况下，它是从类路径中自动检测的。  

spring.datasource.url =＃数据库的JDBC URL。  

spring.datasource.username =  

spring.datasource.validation查询=  

  

＃H2 Web控制台（H2ConsoleProperties）  

spring.h2.console.enabled = false＃启用控制台。  

spring.h2.console.path = / h2-console＃控制台可用的路径。  

  

＃JOOQ（JooqAutoConfiguration）  

spring.jooq.sql-dialect =＃与配置的数据源进行通信时使用的SQLDialect JOOQ。例如`POSTGRES`  

  

＃JPA（JpaBaseConfiguration，HibernateJpaAutoConfiguration）  

spring.data.jpa.repositories.enabled = true＃启用JPA存储库。  

spring.jpa.database =＃目标数据库进行操作，默认为自动检测。可以使用“databasePlatform”属性进行替代设置。  

spring.jpa.database-platform =＃要运行的目标数据库的名称，默认为自动检测。也可以使用“数据库”枚举进行设置。  

spring.jpa.generate-ddl = false＃启动时初始化模式。  

spring.jpa.hibernate.ddl-auto =＃DDL模式。这实际上是“hibernate.hbm2ddl.auto”属性的快捷方式。使用嵌入式数据库时默认为“创建 - 删除”，否则为“无”。  

spring.jpa.hibernate.naming-strategy =＃命名策略完全限定名称。  

spring.jpa.open-in-view = true＃注册OpenEntityManagerInViewInterceptor。将JPA EntityManager绑定到线程，以完成请求的整个处理。  

spring.jpa.properties。* =＃在JPA提供程序上设置的其他本机属性。  

spring.jpa.show-sql = false＃启用SQL语句的日志记录。  

  

＃JTA（JtaAutoConfiguration）  

spring.jta.log-dir =＃事务日志目录。  

  

＃ATOMIKOS  

spring.jta.checkpoint-interval = 500＃检查点之间的间隔。  

spring.jta.console-file-count = 1＃可以创建的调试日志文件的数量。  

spring.jta.console-file-limit = -1＃调试日志文件中最多可以存储多少个字节。  

spring.jta.console-file-name = tm.out＃调试日志文件名。  

spring.jta.console-log-level =＃控制台日志级别。  

spring.jta.default-jta-timeout = 10000＃JTA事务的默认超时。  

spring.jta.enable-logging = true＃启用磁盘日志记录。  

spring.jta.force-shutdown-on-vm-exit = false＃指定VM关闭是否应该触发强制关闭事务内核。  

spring.jta.log-base-dir =＃应该存储日志文件的目录。  

spring.jta.log-base-name = tmlog＃事务日志文件的基本名称。  

spring.jta.max-actives = 50＃活动事务的最大数量。  

spring.jta.max-timeout = 300000＃可以允许事务处理的最大超时时间（以毫秒为单位）。  

spring.jta.output-dir =＃用于存储调试日志文件的目录。  

spring.jta.serial-jta-transactions = true＃指定是否应尽可能地加入子交易。  

spring.jta.service =＃应该启动的事务管理器实现。  

spring.jta.threaded-two-phase-commit = true＃在参与资源上使用不同（并发）线程进行两阶段提交。  

spring.jta.transaction-manager-unique-name =＃事务管理器的唯一名称。  

spring.jta.atomikos.connectionfactory.borrow-connection-timeout = 30＃用于从池中借用连接的超时，以秒为单位。  

spring.jta.atomikos.connectionfactory.ignore-session-transacted-flag = true＃创建会话时是否忽略事务处理标志。  

spring.jta.atomikos.connectionfactory.local-transaction-mode = false＃是否需要本地事务。  

spring.jta.atomikos.connectionfactory.maintenance-interval = 60＃池的维护线程运行之间的时间，以秒为单位。  

spring.jta.atomikos.connectionfactory.max-idle-time = 60＃从池中清除连接之后的时间，以秒为单位。  

spring.jta.atomikos.connectionfactory.max-lifetime = 0＃以秒为单位的连接可以在被销毁前汇集的时间。0表示没有限制。  

spring.jta.atomikos.connectionfactory.max-pool-size = 1＃池的最大尺寸。  

spring.jta.atomikos.connectionfactory.min-pool-size = 1＃池的最小大小。  

spring.jta.atomikos.connectionfactory.reap-timeout = 0＃借用连接的收获超时（以秒为单位）。0表示没有限制。  

spring.jta.atomikos.connectionfactory.unique-resource-name = jmsConnectionFactory＃在恢复期间用于标识资源的唯一名称。  

spring.jta.atomikos.datasource.borrow-connection-timeout = 30＃用于从池中借用连接的超时，以秒为单位。  

spring.jta.atomikos.datasource.default-isolation-level =＃池提供的连接的默认隔离级别。  

spring.jta.atomikos.datasource.login-timeout =＃建立数据库连接的超时时间，以秒为单位。  

spring.jta.atomikos.datasource.maintenance-interval = 60＃池维护线程运行之间的时间（以秒为单位）。  

spring.jta.atomikos.datasource.max-idle-time = 60＃从池中清除连接之后的时间，以秒为单位。  

spring.jta.atomikos.datasource.max-lifetime = 0＃以秒为单位的连接可以在被销毁前汇集的时间。0表示没有限制。  

spring.jta.atomikos.datasource.max-pool-size = 1＃池的最大尺寸。  

spring.jta.atomikos.datasource.min-pool-size = 1＃池的最小大小。  

spring.jta.atomikos.datasource.reap-timeout = 0＃借用连接的收获超时（以秒为单位）。0表示没有限制。  

spring.jta.atomikos.datasource.test-query =＃返回之前用于验证连接的SQL查询或语句。  

spring.jta.atomikos.datasource.unique-resource-name = dataSource＃在恢复期间用于标识资源的唯一名称。  

  

＃BITRONIX  

spring.jta.allow-multiple-lrc = false＃允许多个LRC资源登记到同一个事务中。  

spring.jta.asynchronous2-pc = false＃启用异步执行两阶段提交。  

spring.jta.background-recovery-interval-seconds = 60＃在后台运行恢复进程的时间间隔（以秒为单位）。  

spring.jta.current-node-only-recovery = true＃仅恢复当前节点。  

spring.jta.debug-zero-resource-transaction = false＃记录创建和提交调用堆栈的事务执行没有一个登记资源。  

spring.jta.default-transaction-timeout = 60＃以秒为单位的默认事务超时。  

spring.jta.disable-jmx = false＃启用JMX支持。  

spring.jta.exception-analyzer =＃设置要使用的异常分析器实现的完全限定名称。  

spring.jta.filter-log-status = false＃启用对日志的过滤，以便仅写入强制日志。  

spring.jta.force-batching-enabled = true＃设置是否对磁盘部队进行批处理。  

spring.jta.forced-write-enabled = true＃设置日志是否强制为磁盘。  

spring.jta.graceful-shutdown-interval = 60＃TM在关闭时间终止事务之前等待事务完成的最大时间量。  

spring.jta.jndi-transaction-synchronization-registry-name =＃TransactionSynchronizationRegistry的JNDI名称。  

spring.jta.jndi-user-transaction-name =＃UserTransaction的JNDI名称。  

spring.jta.journal = disk＃期刊的名称。可以是'磁盘'，'空'或类名。  

spring.jta.log-part1-filename = btm1.tlog＃日志的第一个片段的名称。  

spring.jta.log-part2-filename = btm2.tlog＃日志的第二个片段的名称。  

spring.jta.max-log-size-in-mb = 2＃日志片段的最大大小（以兆字节为单位）。  

spring.jta.resource-configuration-filename =＃ResourceLoader配置文件名。  

spring.jta.server-id =＃必须唯一标识此TM实例的ASCII ID。默认为机器的IP地址。  

spring.jta.skip-corrupted-logs = false＃跳过损坏的事务日志条目。  

spring.jta.warn-about-zero-resource-transaction = true＃为未执行单个登记资源的事务记录警告。  

spring.jta.bitronix.connectionfactory.acquire-increment = 1＃增长池时创建的连接数。  

spring.jta.bitronix.connectionfactory.acquisition-interval = 1＃在获取无效连接后尝试重新获取连接之前，需要等待的时间（以秒为单位）。  

spring.jta.bitronix.connectionfactory.acquisition-timeout = 30＃以秒为单位的超时时间，用于从池中获取连接。  

spring.jta.bitronix.connectionfactory.allow-local-transactions = true＃事务管理器是否应允许混合XA和非XA事务。  

spring.jta.bitronix.connectionfactory.apply-transaction-timeout = false＃在登记时是否应在XAResource上设置事务超时。  

spring.jta.bitronix.connectionfactory.automatic-enlisting-enabled = true＃资源是否应该自动登记和除名。  

spring.jta.bitronix.connectionfactory.cache-producer-consumers = true＃是否生产和消费者应该被缓存。  

spring.jta.bitronix.connectionfactory.defer-connection-release = true＃提供者是否可以在同一连接上运行多个事务并支持事务交叉。  

spring.jta.bitronix.connectionfactory.ignore-recovery-failures = false＃是否应该忽略恢复失败。  

spring.jta.bitronix.connectionfactory.max-idle-time = 60＃连接从池中清理之后的时间，以秒为单位。  

spring.jta.bitronix.connectionfactory.max-pool-size = 10＃池的最大尺寸。0表示没有限制。  

spring.jta.bitronix.connectionfactory.min-pool-size = 0＃池的最小大小。  

spring.jta.bitronix.connectionfactory.password =＃用于连接到JMS提供程序的密码。  

spring.jta.bitronix.connectionfactory.share-transaction-connections = false＃是否可以在事务上下文中共享ACCESSIBLE状态下的连接。  

spring.jta.bitronix.connectionfactory.test-connections = true＃是否应该从池中获取连接时测试连接。  

spring.jta.bitronix.connectionfactory.two-pc-ordering-position = 1＃这个资源在两阶段提交期间应该采取的位置（总是首先是Integer.MIN_VALUE，总是最后是Integer.MAX_VALUE）。  

spring.jta.bitronix.connectionfactory.unique-name = jmsConnectionFactory＃在恢复期间用于标识资源的唯一名称。  

spring.jta.bitronix.connectionfactory.use-tm-join = true在启动XAResources时是否应该使用TMJOIN。  

spring.jta.bitronix.connectionfactory.user =＃用于连接到JMS提供者的用户。  

spring.jta.bitronix.datasource.acquire-increment = 1＃增长池时创建的连接数。  

spring.jta.bitronix.datasource.acquisition-interval = 1＃在获取无效连接后，尝试再次获取连接之前的等待时间，以秒为单位。  

spring.jta.bitronix.datasource.acquisition-timeout = 30＃以秒为单位超时获取池中的连接。  

spring.jta.bitronix.datasource.allow-local-transactions = true＃事务管理器是否应允许混合XA和非XA事务。  

spring.jta.bitronix.datasource.apply-transaction-timeout = false＃在注册时是否应该在XAResource上设置事务超时。  

spring.jta.bitronix.datasource.automatic-enlisting-enabled = true＃资源是否应该自动登记和除名。  

spring.jta.bitronix.datasource.cursor-holdability =＃连接的默认光标可保存性。  

spring.jta.bitronix.datasource.defer-connection-release = true＃数据库是否可以在同一连接上运行多个事务并支持事务交叉。  

spring.jta.bitronix.datasource.enable -jdbc4-connection-test =＃是否在从池中获取连接时调用Connection.isValid（）。  

spring.jta.bitronix.datasource.ignore-recovery-failures = false＃是否应该忽略恢复失败。  

spring.jta.bitronix.datasource.isolation-level =＃连接的默认隔离级别。  

spring.jta.bitronix.datasource.local-auto-commit =＃本地事务的默认自动提交模式。  

spring.jta.bitronix.datasource.login-timeout =＃建立数据库连接的超时时间，以秒为单位。  

spring.jta.bitronix.datasource.max-idle-time = 60＃从池中清除连接之后的时间，以秒为单位。  

spring.jta.bitronix.datasource.max-pool-size = 10＃池的最大尺寸。0表示没有限制。  

spring.jta.bitronix.datasource.min-pool-size = 0＃池的最小尺寸。  

spring.jta.bitronix.datasource.prepared-statement-cache-size = 0＃准备好的语句缓存的目标大小。0禁用缓存。  

spring.jta.bitronix.datasource.share-transaction-connections = false＃是否可以在事务上下文中共享ACCESSIBLE状态下的连接。  

spring.jta.bitronix.datasource.test-query =＃返回之前用于验证连接的SQL查询或语句。  

spring.jta.bitronix.datasource.two-pc-ordering-position = 1＃这个资源在两阶段提交期间应该采用的位置（总是首先是Integer.MIN_VALUE，总是最后是Integer.MAX_VALUE）。  

spring.jta.bitronix.datasource.unique-name = dataSource＃在恢复期间用于标识资源的唯一名称。  

spring.jta.bitronix.datasource.use-tm-join = true在启动XAResources时是否应使用TMJOIN。  

  

＃EMBEDDED MONGODB（EmbeddedMongoProperties）  

spring.mongodb.embedded.features = SYNC_DELAY＃要启用的功能的逗号分隔列表。  

spring.mongodb.embedded.version = 2.6.10＃使用Mongo版本。  

  

＃REDIS（RedisProperties）  

spring.redis.database = 0＃连接工厂使用的数据库索引。  

spring.redis.host = localhost＃Redis服务器主机。  

spring.redis.password =＃登录redis服务器的密码。  

spring.redis.pool.max-active = 8＃池在给定时间可以分配的最大连接数。使用负值无限制。  

spring.redis.pool.max-idle = 8＃池中“空闲”连接的最大数量。使用负值表示无限数量的空闲连接。  

spring.redis.pool.max-wait = -1＃连接分配在池耗尽时抛出异常之前应阻塞的最长时间量（以毫秒为单位）。使用负值可以无限期地阻止。  

spring.redis.pool.min-idle = 0＃目标为保持在池中的最小空闲连接数。如果该设置是肯定的，则该设置仅起作用。  

spring.redis.port = 6379＃Redis服务器端口。  

spring.redis.sentinel.master =＃Redis服务器的名称。  

spring.redis.sentinel.nodes =＃主机：端口对的逗号分隔列表。  

spring.redis.timeout = 0＃连接超时（以毫秒为单位）。  

  

  

＃----------------------------------------  

＃整合特性  

＃----------------------------------------  

  

＃ACTIVEMQ（ActiveMQProperties）  

spring.activemq.broker-url =＃ActiveMQ代理的URL。自动生成默认。例如`tcp：// localhost：61616`  

spring.activemq.in-memory = true＃指定默认代理URL是否应该在内存中。如果指定了明确的代理，则忽略。  

spring.activemq.password =＃登录经纪人的密码。  

spring.activemq.pooled = false＃指定是否应创建PooledConnectionFactory而不是常规的ConnectionFactory。  

spring.activemq.user =＃代理的登录用户。  

  

＃ARTEMIS（ArtemisProperties）  

spring.artemis.embedded.cluster-password =＃集群密码。默认情况下在启动时随机生成。  

spring.artemis.embedded.data-directory =＃日记文件目录。如果关闭持久性，则不需要。  

spring.artemis.embedded.enabled = true＃如果Artemis服务器API可用，则启用嵌入模式。  

spring.artemis.embedded.persistent = false＃启用持久存储。  

spring.artemis.embedded.queues =＃在启动时创建的逗号分隔列表。  

spring.artemis.embedded.server-id =＃服务器ID。默认情况下，使用自动递增的计数器。  

spring.artemis.embedded.topics =＃启动时要创建的主题的逗号分隔列表。  

spring.artemis.host = localhost＃阿蒂米斯经纪人主机。  

spring.artemis.mode =＃Artemis部署模式，默认为自动检测。可以明确设置为“本地”或“嵌入”。  

spring.artemis.port = 61616＃阿蒂米斯经纪人港口。  

  

＃SPRING BATCH（BatchProperties）  

spring.batch.initializer.enabled = true＃如果需要，在启动时创建所需的批处理表。  

spring.batch.job.enabled = true＃启动时执行上下文中的所有Spring批处理作业。  

spring.batch.job.names =＃逗号分隔的启动时要执行的作业名称列表（例如`job1，job2`）。默认情况下，执行在上下文中找到的所有作业。  

spring.batch.schema = classpath：org / springframework / batch / core / schema - @@ platform @@。sql＃用于初始化数据库模式的SQL文件的路径。  

spring.batch.table-prefix =＃所有批量元数据表的表前缀。  

  

＃HORNETQ（HornetQProperties）  

spring.hornetq.embedded.cluster-password =＃集群密码。默认情况下在启动时随机生成。  

spring.hornetq.embedded.data-directory =＃日记文件目录。如果关闭持久性，则不需要。  

spring.hornetq.embedded.enabled = true＃如果HornetQ服务器API可用，则启用嵌入模式。  

spring.hornetq.embedded.persistent = false＃启用持久存储。  

spring.hornetq.embedded.queues =＃在启动时创建的逗号分隔列表。  

spring.hornetq.embedded.server-id =＃服务器ID。默认情况下，使用自动递增的计数器。  

spring.hornetq.embedded.topics =＃在启动时创建的以逗号分隔的主题列表。  

spring.hornetq.host = localhost＃HornetQ代理主机。  

spring.hornetq.mode =＃HornetQ部署模式，默认为自动检测。可以明确设置为“本地”或“嵌入”。  

spring.hornetq.port = 5445＃HornetQ经纪人端口。  

  

＃JMS（JmsProperties）  

spring.jms.jndi-name =＃连接工厂的JNDI名称。设置时，优先于其他连接工厂自动配置。  

spring.jms.listener.acknowledge-mode =＃容器的确认模式。默认情况下，侦听器通过自动确认进行事务处理。  

spring.jms.listener.auto-startup = true＃启动时自动启动容器。  

spring.jms.listener.concurrency =＃最小并发消费者数量。  

spring.jms.listener.max-concurrency =＃最大并发消费者数量。  

spring.jms.pub-sub-domain = false＃指定默认目标类型是否为主题。  

  

＃兔子（兔子属性）  

spring.rabbitmq.addresses =＃客户端应连接到的地址的逗号分隔列表。  

spring.rabbitmq.dynamic = true＃创建一个AmqpAdmin bean。  

spring.rabbitmq.host = localhost＃RabbitMQ主机。  

spring.rabbitmq.listener.acknowledge-mode =＃容器的确认模式。  

spring.rabbitmq.listener.auto-startup = true＃启动时自动启动容器。  

spring.rabbitmq.listener.concurrency =＃消费者的最小数量。  

spring.rabbitmq.listener.max-concurrency =＃消费者的最大数量。  

spring.rabbitmq.listener.prefetch =＃在单个请求中要处理的消息数。它应该大于或等于事务大小（如果使用）。  

spring.rabbitmq.listener.transaction-size =＃事务中要处理的消息数。为了获得最佳结果，它应该小于或等于预取计数。  

spring.rabbitmq.password =＃登录对经纪人进行身份验证。  

spring.rabbitmq.port = 5672＃RabbitMQ端口。  

spring.rabbitmq.requested-heartbeat =＃请求的心跳超时，以秒为单位; 零为零。  

spring.rabbitmq.ssl.enabled = false＃启用SSL支持。  

spring.rabbitmq.ssl.key-store =＃保存SSL证书的密钥存储区的路径。  

spring.rabbitmq.ssl.key-store-password =＃用于访问密钥存储区的密码。  

spring.rabbitmq.ssl.trust-store =＃持有SSL证书的信任库。  

spring.rabbitmq.ssl.trust-store-password =＃用于访问信任存储的密码。  

spring.rabbitmq.ssl.algorithm =＃使用的SSL算法。默认情况下由rabbit客户端库配置。  

spring.rabbitmq.username =＃登录用户向代理进行身份验证。  

spring.rabbitmq.virtual-host =＃连接到代理时使用的虚拟主机。  

  

  

＃----------------------------------------  

＃执行器属性  

＃----------------------------------------  

  

＃ENDPOINTS（AbstractEndpoint子类）  

endpoints.enabled = true＃启用端点。  

endpoints.sensitive =＃默认的端点敏感设置。  

endpoints.actuator.enabled = true＃启用端点。  

endpoints.actuator.path =＃端点URL路径。  

endpoints.actuator.sensitive = false＃启用端点的安全性。  

endpoints.autoconfig.enabled =＃启用端点。  

endpoints.autoconfig.id =＃端点标识符。  

endpoints.autoconfig.sensitive =＃标记端点是否暴露敏感信息。  

endpoints.beans.enabled =＃启用端点。  

endpoints.beans.id =＃端点标识符。  

endpoints.beans.sensitive =＃标记端点是否暴露敏感信息。  

endpoints.configprops.enabled =＃启用端点。  

endpoints.configprops.id =＃端点标识符。  

endpoints.configprops.keys-to-sanitize =密码，密钥，密钥，。*凭证。*，vcap_services＃应该清理的密钥。键可以是属性以或正则表达式结束的简单字符串。  

endpoints.configprops.sensitive =＃标记端点是否公开敏感信息。  

endpoints.docs.curies.enabled = false＃启用居里代。  

endpoints.docs.enabled = true＃启用执行器文档终结点。  

endpoints.docs.path = / docs＃  

endpoints.docs.sensitive = false＃  

endpoints.dump.enabled =＃启用端点。  

endpoints.dump.id =＃端点标识符。  

endpoints.dump.sensitive =＃标记端点是否暴露敏感信息。  

endpoints.env.enabled =＃启用端点。  

endpoints.env.id =＃端点标识符。  

endpoints.env.keys-to-sanitize =密码，密钥，密钥，。*凭证。*，vcap_services＃应该清理的密钥。键可以是属性以或正则表达式结束的简单字符串。  

endpoints.env.sensitive =＃标记端点是否暴露敏感信息。  

endpoints.flyway.enabled =＃启用端点。  

endpoints.flyway.id =＃端点标识符。  

endpoints.flyway.sensitive =＃标记端点是否暴露敏感信息。  

endpoints.health.enabled =＃启用端点。  

endpoints.health.id =＃端点标识符。  

endpoints.health.mapping。* =＃健康状态到HttpStatus代码的映射。默认情况下，注册的健康状态映射到合理的默认值（即UP地图为200）。  

endpoints.health.sensitive =＃标记端点是否暴露敏感信息。  

endpoints.health.time-to-live = 1000＃缓存结果的生存时间（以毫秒为单位）。  

endpoints.info.enabled =＃启用端点。  

endpoints.info.id =＃端点标识符。  

endpoints.info.sensitive =＃标记端点是否暴露敏感信息。  

endpoints.jolokia.enabled = true＃启用Jolokia端点。  

endpoints.jolokia.path = / jolokia＃端点URL路径。  

endpoints.jolokia.sensitive = true＃启用端点的安全性。  

endpoints.liquibase.enabled =＃启用端点。  

endpoints.liquibase.id =＃端点标识符。  

endpoints.liquibase.sensitive =＃标记端点是否暴露敏感信息。  

endpoints.logfile.enabled = true＃启用端点。  

endpoints.logfile.path = / logfile＃端点URL路径。  

endpoints.logfile.sensitive = true＃在端点上启用安全性。  

endpoints.mappings.enabled =＃启用端点。  

endpoints.mappings.id =＃端点标识符。  

endpoints.mappings.sensitive =＃标记端点是否暴露敏感信息。  

endpoints.metrics.enabled =＃启用端点。  

endpoints.metrics.filter.enabled = true＃启用度量servlet过滤器。  

endpoints.metrics.id =＃端点标识符。  

endpoints.metrics.sensitive =＃标记端点是否暴露敏感信息。  

endpoints.shutdown.enabled =＃启用端点。  

endpoints.shutdown.id =＃端点标识符。  

endpoints.shutdown.sensitive =＃标记端点是否暴露敏感信息。  

endpoints.trace.enabled =＃启用端点。  

endpoints.trace.id =＃端点标识符。  

endpoints.trace.sensitive =＃标记端点是否暴露敏感信息。  

  

＃ENDPOINTS CORS配置（EndpointCorsProperties）  

endpoints.cors.allow-credentials =＃设置是否支持凭证。未设置时，不支持凭证。  

endpoints.cors.allowed-headers =＃在请求中允许使用逗号分隔的标题列表。'*'允许所有标题。  

endpoints.cors.allowed-methods = GET＃逗号分隔的允许的方法列表。'*'允许所有方法。  

endpoints.cors.allowed-origins =＃逗号分隔的起源列表允许。'*'允许所有的来源。未设置时，CORS支持被禁用。  

endpoints.cors.exposed-headers =＃逗号分隔的标题列表包含在响应中。  

endpoints.cors.max-age = 1800＃以秒为单位，客户端可以缓存飞行前请求的响应。  

  

＃JMX ENDPOINT（EndpointMBeanExportProperties）  

endpoints.jmx.domain =＃JMX域名。如果设置，则使用'spring.jmx.default-domain'的值进行初始化。  

endpoints.jmx.enabled = true＃启用所有端点的JMX导出。  

endpoints.jmx.static-names =＃附加到所有表示端点的MBean的ObjectName的静态属性。  

endpoints.jmx.unique-names = false＃确保ObjectNames在发生冲突时被修改。  

  

＃JOLOKIA（JolokiaProperties）  

jolokia.config。* =＃请参阅Jolokia手册  

  

＃管理HTTP服务器（ManagementServerProperties）  

management.add-application-context-header = true＃在每个响应中添加“X-Application-Context”HTTP标头。  

management.address =＃管理端点应该绑定的网络地址。  

management.context-path =＃管理端点上下文路径。例如`/执行器'  

management.port =＃管理端点HTTP端口。默认使用与应用程序相同的端口。  

management.security.enabled = true＃启用安全性。  

management.security.role = ADMIN＃访问管理端点所需的角色。  

management.security.sessions =无状态＃会话创建策略使用（永远，从不，if_required，无状态）。  

  

＃健康指标（以前为健康*）  

management.health.db.enabled = true＃启用数据库运行状况检查。  

management.health.defaults.enabled = true＃启用默认运行状况指示器。  

management.health.diskspace.enabled = true＃启用磁盘空间运行状况检查。  

management.health.diskspace.path =＃用于计算可用磁盘空间的路径。  

management.health.diskspace.threshold = 0＃应该可用的最小磁盘空间，以字节为单位。  

management.health.elasticsearch.enabled = true＃启用elasticsearch运行状况检查。  

management.health.elasticsearch.indices =＃逗号分隔的索引名称。  

management.health.elasticsearch.response-timeout = 100＃等待群集响应的时间（以毫秒为单位）。  

management.health.jms.enabled = true＃启用JMS运行状况检查。  

management.health.mail.enabled = true＃启用邮件运行状况检查。  

management.health.mongo.enabled = true＃启用MongoDB运行状况检查。  

management.health.rabbit.enabled = true＃启用RabbitMQ运行状况检查。  

management.health.redis.enabled = true＃启用Redis运行状况检查。  

management.health.solr.enabled = true＃启用Solr运行状况检查。  

management.health.status.order = DOWN，OUT_OF_SERVICE，UNKNOWN，UP＃以严重性顺序的逗号分隔的健康状态列表。  

  

＃TRACING（（TraceProperties）  

management.trace.include =请求标题，响应标题，错误＃要包含在跟踪中的项目。  

  

＃远程外壳  

shell.auth = simple＃认证类型。根据环境自动检测。  

shell.auth.jaas.domain =我的域#JAAS域。  

shell.auth.key.path =＃认证密钥的路径。这应该指向一个有效的“.pem”文件。  

shell.auth.simple.user.name = user＃登录用户。  

shell.auth.simple.user.password =＃登录密码。  

shell.auth.spring.roles = ADMIN＃用于登录到CRaSH控制台的所需角色的逗号分隔列表。  

shell.command-path-patterns = classpath *：/ commands / **，classpath *：/ crash / commands / **＃用于查找命令的模式。  

shell.command-refresh-interval = -1＃如果需要（以秒为单位），扫描更改并更新命令。  

shell.config-path-patterns = classpath *：/ crash / *＃用于查找配置的模式。  

shell.disabled-commands = jpa *，jdbc *，jndi *＃禁用命令的逗号分隔列表。  

shell.disabled-plugins =＃禁用逗号分隔的插件列表。根据环境，某些插件默认处于禁用状态。  

shell.ssh.auth-timeout =＃用户将被提示再次登录后的毫秒数。  

shell.ssh.enabled = true＃启用CRaSH SSH支持。  

shell.ssh.idle-timeout =＃关闭未使用的连接之后的毫秒数。  

shell.ssh.key-path =＃SSH服务器密钥的路径。  

shell.ssh.port = 2000＃SSH端口。  

shell.telnet.enabled = false＃启用CRaSH telnet支持。如果TelnetPlugin可用，则默认启用。  

shell.telnet.port = 5000＃Telnet端口。  

  

＃GIT信息  

spring.git.properties =＃生成的git信息属性文件的资源引用。  

  

＃METRICS EXPORT（MetricExportProperties）  

spring.metrics.export.aggregate.key-pattern =＃告诉聚合器如何处理源存储库中的密钥的模式。  

spring.metrics.export.aggregate.prefix =＃全局存储库的前缀（如果处于活动状态）。  

spring.metrics.export.delay-millis = 5000＃导出刻度之间的延迟（以毫秒为单位）。按照计划将度量标准导出到外部源，并且延迟。  

spring.metrics.export.enabled = true＃启用度量标准导出的标志（假设MetricWriter可用）。  

spring.metrics.export.excludes =＃要排除的度量标准名称的模式列表。包含后应用。  

spring.metrics.export.includes =＃要包含的度量标准名称的模式列表。  

spring.metrics.export.redis.key = keys.spring.metrics＃Redis存储库导出密钥（如果处于活动状态）。  

spring.metrics.export.redis.prefix = spring.metrics＃如果处于活动状态，则Redis存储库的前缀。  

spring.metrics.export.send-latest =＃根据不导出未更改的度量标准值，标记关闭任何可用的优化。  

spring.metrics.export.statsd.host =＃接收导出指标的statsd服务器的主机。  

spring.metrics.export.statsd.port = 8125＃接收导出指标的statsd服务器的端口。  

spring.metrics.export.statsd.prefix =＃statsd导出指标的前缀。  

spring.metrics.export.triggers。* =＃每个MetricWriter bean名称的特定触发器属性。  

  

  

＃----------------------------------------  

＃DEVTOOLS属性  

＃----------------------------------------  

  

＃DEVTOOLS（DevToolsProperties）  

spring.devtools.livereload.enabled = true＃启用livereload.com兼容服务器。  

spring.devtools.livereload.port = 35729＃服务器端口。  

spring.devtools.restart.additional-exclude =＃应该从触发完全重新启动时排除的其他模式。  

spring.devtools.restart.additional-paths =＃观察更改的其他路径。  

spring.devtools.restart.enabled = true＃启用自动重启。  

spring.devtools.restart.exclude = META-INF /行家/ **，META-INF /资源/ **，资源/ **，静态/ **，公共/ **，模板/ **，** / * Test.class，** / * Tests.class，git.properties＃应该排除触发完全重新启动的模式。  

spring.devtools.restart.poll-interval = 1000＃轮询类路径更改之间等待的时间（以毫秒为单位）。  

spring.devtools.restart.quiet-period = 400＃触发重新启动之前，没有任何类路径更改所需的安静时间（以毫秒为单位）。  

spring.devtools.restart.trigger-file =＃特定文件的名称，在更改时会触发重新启动检查。如果未指定，则任何类路径文件更改都将触发重新启动。  

  

＃REMOTE DEVTOOLS（RemoteDevToolsProperties）  

spring.devtools.remote.context-path = /。~~ spring-boot！〜＃用于处理远程连接的上下文路径。  

spring.devtools.remote.debug.enabled = true＃启用远程调试支持。  

spring.devtools.remote.debug.local-port = 8000＃本地远程调试服务器端口。  

spring.devtools.remote.proxy.host =＃用于连接远程应用程序的代理主机。  

spring.devtools.remote.proxy.port =＃用于连接远程应用程序的代理端口。  

spring.devtools.remote.restart.enabled = true＃启用远程重启。  

spring.devtools.remote.secret =＃建立连接所需的共享密钥（启用远程支持所必需的）。  

spring.devtools.remote.secret-header-name = X-AUTH-TOKEN＃用于传输共享密钥的HTTP头。 

1. ＃================================================= ==================
2.  
   ＃共同spring boot特性
3.  
   ＃
4.  
   ＃此示例文件作为指导提供。不要在其中复制它
5.  
   ＃完整到您自己的应用程序。^^^
6.  
   ＃================================================= ==================
7.  
    
8.  
    
9.  
   ＃----------------------------------------
10.  
    ＃核心属性
11.  
    ＃----------------------------------------
12.  
     
13.  
    ＃BANNER
14.  
    banner.charset = UTF-8＃横幅文件编码。
15.  
    banner.location = classpath：banner.txt＃横幅文件位置。
16.  
     
17.  
    ＃记录
18.  
    logging.config =＃日志配置文件的位置。例如Logback的`classpath：logback.xml`
19.  
    logging.exception-conversion-word =％wEx＃记录异常时使用的转换字。
20.  
    logging.file =＃记录文件名称。例如`myapp.log`
21.  
    logging.level。* =＃日志级别严重性映射。例如`logging.level.org.springframework = DEBUG`
22.  
    logging.path =＃日志文件的位置。例如`/ var / log`
23.  
    logging.pattern.console =＃输出到控制台的Appender模式。仅支持默认的登录设置。
24.  
    logging.pattern.file =＃输出到文件的Appender模式。仅支持默认的登录设置。
25.  
    logging.pattern.level =＃日志级别的Appender模式（默认％5p）。仅支持默认的登录设置。
26.  
    logging.register-shutdown-hook = false＃为日志记录系统初始化时注册一个关闭钩子。
27.  
     
28.  
    ＃AOP
29.  
    spring.aop.auto = true＃添加@EnableAspectJAutoProxy。
30.  
    spring.aop.proxy-target-class = false＃与基于Java接口的标准代理（false）相比，是否创建基于子类的（CGLIB）代理（true）。
31.  
     
32.  
    ＃IDENTITY（ContextIdApplicationContextInitializer）
33.  
    spring.application.index =＃应用程序索引。
34.  
    spring.application.name =＃应用程序名称。
35.  
     
36.  
    ＃ADMIN（SpringApplicationAdminJmxAutoConfiguration）
37.  
    spring.application.admin.enabled = false＃为应用程序启用管理功能。
38.  
    spring.application.admin.jmx-name = org.springframework.boot：type = Admin，name = SpringApplication＃JMX应用程序的名称admin MBean。
39.  
     
40.  
    ＃自动配置
41.  
    spring.autoconfigure.exclude =＃要排除的自动配置类。
42.  
     
43.  
    ＃弹簧芯
44.  
    spring.beaninfo.ignore = true＃跳过对BeanInfo类的搜索。
45.  
     
46.  
    ＃SPRING CACHE（CacheProperties）
47.  
    spring.cache.cache-names =＃如果基础高速缓存管理器支持，将创建缓存名称的逗号分隔列表。
48.  
    spring.cache.ehcache.config =＃用于初始化EhCache的配置文件的位置。
49.  
    spring.cache.guava.spec =＃用于创建缓存的规范。检查CacheBuilderSpec以获取有关spec格式的更多详细信息。
50.  
    spring.cache.hazelcast.config =＃用于初始化Hazelcast的配置文件的位置。
51.  
    spring.cache.infinispan.config =＃用于初始化Infinispan的配置文件的位置。
52.  
    spring.cache.jcache.config =＃用于初始化缓存管理器的配置文件的位置。
53.  
    spring.cache.jcache.provider =＃用于检索符合JSR-107的缓存管理器的CachingProvider实现的完全限定名称。只有在类路径中有多个JSR-107实现可用时才需要。
54.  
    spring.cache.type =＃缓存类型，默认根据环境自动检测。
55.  
     
56.  
    ＃SPRING CONFIG - 仅使用环境属性（ConfigFileApplicationListener）
57.  
    spring.config.location =＃配置文件位置。
58.  
    spring.config.name = application＃配置文件名。
59.  
     
60.  
    ＃HAZELCAST（HazelcastProperties）
61.  
    spring.hazelcast.config =＃用于初始化Hazelcast的配置文件的位置。
62.  
     
63.  
    ＃JMX
64.  
    spring.jmx.default-domain =＃JMX域名。
65.  
    spring.jmx.enabled = true＃将管理bean展示给JMX域。
66.  
    spring.jmx.server = mbeanServer＃MBeanServer bean名称。
67.  
     
68.  
    ＃电子邮件（MailProperties）
69.  
    spring.mail.default-encoding = UTF-8＃默认MimeMessage编码。
70.  
    spring.mail.host =＃SMTP服务器主机。例如`smtp.example.com`
71.  
    spring.mail.jndi-name =＃会话JNDI名称。设置时，优先于其他邮件设置。
72.  
    spring.mail.password =＃登录SMTP服务器的密码。
73.  
    spring.mail.port =＃SMTP服务器端口。
74.  
    spring.mail.properties。* =＃其他JavaMail会话属性。
75.  
    spring.mail.protocol = smtp＃SMTP服务器使用的协议。
76.  
    spring.mail.test-connection = false＃测试邮件服务器在启动时是否可用。
77.  
    spring.mail.username =＃登录SMTP服务器的用户。
78.  
     
79.  
    ＃应用程序设置（SpringApplication）
80.  
    spring.main.banner-mode = console＃用于在应用程序运行时显示横幅的模式。
81.  
    spring.main.sources =＃要包含在ApplicationContext中的源（类名，包名或XML资源位置）。
82.  
    spring.main.web-environment =＃在Web环境中运行应用程序（默认为自动检测）。
83.  
     
84.  
    ＃FILE ENCODING（FileEncodingApplicationListener）
85.  
    spring.mandatory-file-encoding =＃应用程序必须使用的预期字符编码。
86.  
     
87.  
    ＃国际化（MessageSourceAutoConfiguration）
88.  
    spring.messages.basename = messages＃逗号分隔的基本名称列表，每个都遵循ResourceBundle约定。
89.  
    spring.messages.cache-seconds = -1＃加载资源包文件缓存过期，以秒为单位。设置为-1时，捆绑包将永久缓存。
90.  
    spring.messages.encoding = UTF-8＃消息包编码。
91.  
    spring.messages.fallback-to-system-locale = true＃如果未找到特定语言环境的文件，则设置是否回退到系统区域设置。
92.  
     
93.  
    ＃输出
94.  
    spring.output.ansi.enabled = detect＃配置ANSI输出（可以是“detect”，“always”，“never”）。
95.  
     
96.  
    ＃PID文件（ApplicationPidFileWriter）
97.  
    spring.pid.fail-on-write-error =＃如果使用ApplicationPidFileWriter，则失败，但不能写入PID文件。
98.  
    spring.pid.file =＃要写入的PID文件的位置（如果使用ApplicationPidFileWriter）。
99.  
     
100.  
     ＃个人资料
101.  
     spring.profiles.active =＃逗号分隔的活动配置文件列表。
102.  
     spring.profiles.include =＃无条件激活指定的逗号分隔的配置文件。
103.  
      
104.  
     ＃SENDGRID（SendGridAutoConfiguration）
105.  
     spring.sendgrid.username =＃SendGrid帐户用户名
106.  
     spring.sendgrid.password =＃SendGrid帐号密码
107.  
     spring.sendgrid.proxy.host =＃SendGrid代理主机
108.  
     spring.sendgrid.proxy.port =＃SendGrid代理端口
109.  
      
110.  
      
111.  
     ＃----------------------------------------
112.  
     ＃网络属性
113.  
     ＃----------------------------------------
114.  
      
115.  
     ＃MULTIPART（多部分属性）
116.  
     multipart.enabled = true＃启用对多部分上传的支持。
117.  
     multipart.file-size-threshold = 0＃文件将写入磁盘之后的阈值。值可以使用后缀“MB”或“KB”来表示兆字节或千字节大小。
118.  
     multipart.location =＃上传文件的中间位置。
119.  
     multipart.max-file-size = 1Mb＃最大文件大小。值可以使用后缀“MB”或“KB”来表示兆字节或千字节大小。
120.  
     multipart.max-request-size = 10Mb＃最大请求大小。值可以使用后缀“MB”或“KB”来表示兆字节或千字节大小。
121.  
      
122.  
     ＃嵌入式服务器配置（ServerProperties）
123.  
     server.address =＃服务器应绑定到的网络地址。
124.  
     server.compression.enabled = false＃如果启用了响应压缩。
125.  
     server.compression.excluded-user-agents =＃要从压缩中排除的用户代理列表。
126.  
     server.compression.mime-types =＃应该压缩的MIME类型的逗号分隔列表。例如`text / html，text / css，application / json`
127.  
     server.compression.min-response-size =＃要执行压缩所需的最小响应大小。例如2048
128.  
     server.context-parameters。* =＃Servlet上下文初始化参数。例如`server.context-parameters.a = alpha`
129.  
     server.context-path =＃应用程序的上下文路径。
130.  
     server.display-name = application＃显示应用程序的名称。
131.  
     server.error.include-stacktrace = never＃何时包含“stacktrace”属性。
132.  
     server.error.path = / error＃错误控制器的路径。
133.  
     server.error.whitelabel.enabled = true＃在服务器错误的情况下，启用浏览器中显示的默认错误页面。
134.  
     server.jsp-servlet.class-name = org.apache.jasper.servlet.JspServlet＃JSP servlet的类名称。
135.  
     server.jsp-servlet.init-parameters。* =＃用于配置JSP servlet的初始参数
136.  
     server.jsp-servlet.registered = true＃JSP servlet是否已注册
137.  
     server.port = 8080＃服务器HTTP端口。
138.  
     server.server-header =＃服务器响应头中发送的值（如果为空，则使用servlet容器默认值）
139.  
     server.servlet-path = /＃主调度程序servlet的路径。
140.  
     server.session.cookie.comment =＃会话cookie的注释。
141.  
     server.session.cookie.domain =＃会话cookie的域名。
142.  
     server.session.cookie.http-only =＃会话cookie的“HttpOnly”标志。
143.  
     server.session.cookie.max-age =＃以秒为单位的会话cookie的最大时间。
144.  
     server.session.cookie.name =＃会话cookie名称。
145.  
     server.session.cookie.path =＃会话cookie的路径。
146.  
     server.session.cookie.secure =＃会话cookie的“安全”标志。
147.  
     server.session.persistent = false＃在重新启动之间保留会话数据。
148.  
     server.session.store-dir =＃用于存储会话数据的目录。
149.  
     server.session.timeout =＃以秒为单位的会话超时。
150.  
     server.session.tracking-modes =＃会话跟踪模式（以下一项或多项：“cookie”，“url”，“ssl”）。
151.  
     server.ssl.ciphers =＃支持的SSL密码。
152.  
     server.ssl.client-auth =＃是否需要客户端身份验证（“需要”）或需要（“需要”）。需要信任商店。
153.  
     server.ssl.enabled =＃
154.  
     server.ssl.key-alias =＃
155.  
     server.ssl.key-password =＃
156.  
     server.ssl.key-store =＃
157.  
     server.ssl.key-store-password =＃
158.  
     server.ssl.key-store-provider =＃
159.  
     server.ssl.key-store-type =＃
160.  
     server.ssl.protocol =＃
161.  
     server.ssl.trust-store =＃
162.  
     server.ssl.trust-store-password =＃
163.  
     server.ssl.trust-store-provider =＃
164.  
     server.ssl.trust-store-type =＃
165.  
     server.tomcat.accesslog.directory = logs＃创建日志文件的目录。可以相对于tomcat的基本目录或绝对。
166.  
     server.tomcat.accesslog.enabled = false＃启用访问日志。
167.  
     server.tomcat.accesslog.pattern = common＃访问日志的格式模式。
168.  
     server.tomcat.accesslog.prefix = access_log＃记录文件名前缀。
169.  
     server.tomcat.accesslog.suffix = .log＃日志文件名后缀。
170.  
     server.tomcat.background-processor-delay = 30＃调用backgroundProcess方法之间的延迟（秒）。
171.  
     server.tomcat.basedir =＃Tomcat基本目录。如果未指定，则将使用临时目录。
172.  
     server.tomcat.internal-proxies= 10 \\ d {1,3} \\ d {1,3} \\ d {1,3} | \\
173.  
     。192 \\ 168 \\ d {1,3} \\ d {1,3} | \\
174.  
     。169 \\ 254 \\ d {1,3} \\ d {1,3} | \\
175.  
     。127 \\ d {1,3} \\ d {1,3} \\ d {1,3} | \\
176.  
     172 \\ 1 [6-9] {1} \\ d {1,3} \\ d {1,3} |。。\\
177.  
     172 \\ 2 [0-9] {1} \\ d {1,3} \\ d {1,3} |。。\\
178.  
     172 \\。3 [0-1] {1} \\。\\ d {1,3} \\。\\ d {1,3}＃匹配可信IP地址的正则表达式。
179.  
     server.tomcat.max-http-header-size = 0＃HTTP消息头的最大字节数。
180.  
     server.tomcat.max-threads = 0＃工作线程的最大数量。
181.  
     server.tomcat.port-header = X-Forwarded-Port＃用于覆盖原始端口值的HTTP标头的名称。
182.  
     server.tomcat.protocol-header =＃保存传入协议的头部，通常名为“X-Forwarded-Proto”。
183.  
     server.tomcat.protocol-header-https-value = https＃指示传入请求使用SSL的协议头的值。
184.  
     server.tomcat.remote-ip-header =＃从中提取远程IP的http头的名称。例如`X-FORWARDED-FOR`
185.  
     server.tomcat.uri-encoding = UTF-8＃用于解码URI的字符编码。
186.  
     server.undertow.accesslog.dir =＃取消访问日志目录。
187.  
     server.undertow.accesslog.enabled = false＃启用访问日志。
188.  
     server.undertow.accesslog.pattern = common＃访问日志的格式模式。
189.  
     server.undertow.buffer-size =＃每个缓冲区的大小（以字节为单位）。
190.  
     server.undertow.buffers-per-region =＃每个区域的缓冲区数量。
191.  
     server.undertow.direct-buffers =＃在Java堆外分配缓冲区。
192.  
     server.undertow.io-threads =＃为worker创建的I / O线程数量。
193.  
     server.undertow.worker-threads =＃工作线程数。
194.  
     server.use-forward-headers =＃如果X-Forwarded- *标头应该应用于HttpRequest。
195.  
      
196.  
     #FREEMARKER（FreeMarkerAutoConfiguration）
197.  
     spring.freemarker.allow-request-override = false＃设置是否允许HttpServletRequest属性覆盖（隐藏）具有相同名称的控制器生成的模型属性。
198.  
     spring.freemarker.allow-session-override = false＃设置是否允许HttpSession属性覆盖（隐藏）具有相同名称的控制器生成的模型属性。
199.  
     spring.freemarker.cache = false＃启用模板缓存。
200.  
     spring.freemarker.charset = UTF-8＃模板编码。
201.  
     spring.freemarker.check-template-location = true＃检查模板位置是否存在。
202.  
     spring.freemarker.content-type = text / html＃Content-Type值。
203.  
     spring.freemarker.enabled = true＃为此技术启用MVC视图分辨率。
204.  
     spring.freemarker.expose-request-attributes = false＃设置在与模板合并之前是否应将所有请求属性添加到模型中。
205.  
     spring.freemarker.expose-session-attributes = false＃设置在与模板合并之前是否应将所有HttpSession属性添加到模型中。
206.  
     spring.freemarker.expose-spring-macro-helpers = true＃设置是否公开名为“springMacroRequestContext”的供Spring的宏库使用的RequestContext。
207.  
     spring.freemarker.prefer-file-system-access = true＃优先选择模板加载的文件系统访问权限。文件系统访问使模板更改的热检测成为可能。
208.  
     spring.freemarker.prefix =＃构建URL时预先查看名称的前缀。
209.  
     spring.freemarker.request-context-attribute =＃所有视图的RequestContext属性的名称。
210.  
     spring.freemarker.settings.* =＃众所周知的FreeMarker键将被传递给FreeMarker的配置。
211.  
     spring.freemarker.suffix =＃在构建URL时被附加到查看名称的后缀。
212.  
     spring.freemarker.template-loader-path = classpath：/ templates /＃逗号分隔的模板路径列表。
213.  
     spring.freemarker.view-names =＃可以解析的视图名称的白名单。
214.  
      
215.  
     ＃GROOVY模板（GroovyTemplateAutoConfiguration）
216.  
     spring.groovy.template.allow-request-override = false＃设置是否允许HttpServletRequest属性覆盖（隐藏）具有相同名称的控制器生成的模型属性。
217.  
     spring.groovy.template.allow-session-override = false＃设置是否允许HttpSession属性覆盖（隐藏）具有相同名称的控制器生成的模型属性。
218.  
     spring.groovy.template.cache =＃启用模板缓存。
219.  
     spring.groovy.template.charset = UTF-8＃模板编码。
220.  
     spring.groovy.template.check-template-location = true＃检查模板位置是否存在。
221.  
     spring.groovy.template.configuration。* =＃请参阅GroovyMarkupConfigurer
222.  
     spring.groovy.template.content-type = test / html＃Content-Type值。
223.  
     spring.groovy.template.enabled = true＃为此技术启用MVC视图分辨率。
224.  
     spring.groovy.template.expose-request-attributes = false＃设置在与模板合并之前是否应将所有请求属性添加到模型中。
225.  
     spring.groovy.template.expose-session-attributes = false＃设置在与模板合并之前是否应将所有HttpSession属性添加到模型中。
226.  
     spring.groovy.template.expose-spring-macro-helpers = true＃设置是否公开一个供Spring的宏库使用的名为“springMacroRequestContext”的RequestContext。
227.  
     spring.groovy.template.prefix =＃构建URL时预先查看名称的前缀。
228.  
     spring.groovy.template.request-context-attribute =＃所有视图的RequestContext属性的名称。
229.  
     spring.groovy.template.resource-loader-path = classpath：/ templates /＃模板路径。
230.  
     spring.groovy.template.suffix = .tpl＃在构建URL时被附加到视图名称后缀。
231.  
     spring.groovy.template.view-names =＃可以解析的视图名称的白名单。
232.  
      
233.  
     ＃春天HATEOAS（Hateoas属性）
234.  
     spring.hateoas.use-hal-as-default-json-media-type = true＃指定应用程序/ hal + json响应是否应发送到接受application / json的请求。
235.  
      
236.  
     ＃HTTP消息转换
237.  
     spring.http.converters.preferred-json-mapper = jackson＃用于HTTP消息转换的首选JSON映射器。设置为“gson”来强制使用Gson，当它和Jackson都在类路径中时。
238.  
      
239.  
     ＃HTTP编码（HttpEncodingProperties）
240.  
     spring.http.encoding.charset = UTF-8＃HTTP请求和响应的字符集。如果未明确设置，则添加到“Content-Type”标题中。
241.  
     spring.http.encoding.enabled = true＃启用http编码支持。
242.  
     spring.http.encoding.force = true＃强制编码到HTTP请求和响应上配置的字符集。
243.  
      
244.  
     ＃杰克逊（JacksonProperties）
245.  
     spring.jackson.date-format =＃日期格式字符串或完全合格的日期格式类名称。例如`yyyy-MM-dd HH：mm：ss`。
246.  
     spring.jackson.deserialization。* =＃杰克逊开/关功能，影响Java对象反序列化的方式。
247.  
     spring.jackson.generator。* =＃生成器的Jackson开/关功能。
248.  
     spring.jackson.joda-date-time-format =＃乔达日期时间格式字符串。如果未配置，如果使用格式字符串配置，则将使用“日期格式”作为后备。
249.  
     spring.jackson.locale =＃用于格式化的区域设置。
250.  
     spring.jackson.mapper。* =＃杰克逊通用开/关功能。
251.  
     spring.jackson.parser。* =＃解析器的Jackson开/关功能。
252.  
     spring.jackson.property-naming-strategy =＃Jackson的PropertyNamingStrategy上的常量之一。也可以是PropertyNamingStrategy子类的完全限定类名。
253.  
     spring.jackson.serialization。* =＃杰克逊开/关功能，影响Java对象序列化的方式。
254.  
     spring.jackson.serialization-inclusion =＃在序列化过程中控制属性的包含。使用Jackson的JsonInclude.Include枚举中的一个值进行配置。
255.  
     spring.jackson.time-zone =＃格式化日期时使用的时区。例如`America / Los_Angeles`
256.  
      
257.  
     ＃泽西（JerseyProperties）
258.  
     spring.jersey.application-path =＃作为应用程序的基本URI的路径。如果指定，则覆盖“@ApplicationPath”的值。
259.  
     spring.jersey.filter.order = 0＃Jersey过滤器链顺序。
260.  
     spring.jersey.init。* =＃初始化参数通过servlet或过滤器传递给Jersey。
261.  
     spring.jersey.type = servlet＃Jersey集成类型。可以是“servlet”或“filter”。
262.  
      
263.  
     ＃SPRING MOBILE DEVICE VIEWS（DeviceDelegatingViewResolverAutoConfiguration）
264.  
     spring.mobile.devicedelegatingviewresolver.enable-fallback = false＃启用对回退解析的支持。
265.  
     spring.mobile.devicedelegatingviewresolver.enabled = false＃启用设备视图解析器。
266.  
     spring.mobile.devicedelegatingviewresolver.mobile-prefix = mobile /＃预设为查看移动设备名称的前缀。
267.  
     spring.mobile.devicedelegatingviewresolver.mobile-suffix =＃附加到移动设备视图名称的后缀。
268.  
     spring.mobile.devicedelegatingviewresolver.normal-prefix =＃用于查看普通设备名称的前缀。
269.  
     spring.mobile.devicedelegatingviewresolver.normal-suffix =＃附加到正常设备的视图名称后缀。
270.  
     spring.mobile.devicedelegatingviewresolver.tablet-prefix = tablet /＃预设为查看平板设备名称的前缀。
271.  
     spring.mobile.devicedelegatingviewresolver.tablet-suffix =＃附加到平板设备的查看名称的后缀。
272.  
      
273.  
     ＃SPRING MOBILE SITE PREFERENCE（SitePreferenceAutoConfiguration）
274.  
     spring.mobile.sitepreference.enabled = true＃启用SitePreferenceHandler。
275.  
      
276.  
     #MUSTACHE模板（MustacheAutoConfiguration）
277.  
     spring.mustache.cache = false＃启用模板缓存。
278.  
     spring.mustache.charset = UTF-8＃模板编码。
279.  
     spring.mustache.check-template-location = true＃检查模板位置是否存在。
280.  
     spring.mustache.content-type = text / html＃Content-Type值。
281.  
     spring.mustache.enabled = true＃启用此技术的MVC视图分辨率。
282.  
     spring.mustache.prefix = classpath：/ templates /＃应用于模板名称的前缀。
283.  
     spring.mustache.suffix = .html＃应用于模板名称的后缀。
284.  
     spring.mustache.view-names =＃可以解析的视图名称的白名单。
285.  
      
286.  
     ＃SPRING MVC（WebMvcProperties）
287.  
     spring.mvc.async.request-timeout =＃异步请求处理超时之前的时间（以毫秒为单位）。
288.  
     spring.mvc.date-format =＃要使用的日期格式。例如`dd / MM / yyyy`。
289.  
     spring.mvc.dispatch-trace-request = false＃将TRACE请求分派给FrameworkServlet doService方法。
290.  
     spring.mvc.dispatch-options-request = false＃将OPTIONS请求分派给FrameworkServlet的doService方法。
291.  
     spring.mvc.favicon.enabled = true＃启用favicon.ico的解析。
292.  
     spring.mvc.formcontent.putfilter.enabled = true＃启用Spring的HttpPutFormContentFilter。
293.  
     spring.mvc.ignore-default-model-on-redirect = true＃如果在重定向场景中应忽略“默认”模型的内容。
294.  
     spring.mvc.locale =＃使用的语言环境。
295.  
     spring.mvc.media-types。* =＃将文件扩展名映射到媒体类型以进行内容协商。
296.  
     spring.mvc.message-codes-resolver-format =＃消息代码的格式化策略。例如`PREFIX_ERROR_CODE`。
297.  
     spring.mvc.static-path-pattern = / **＃用于静态资源的路径模式。
298.  
     spring.mvc.throw-exception-if-no-handler-found = false＃如果发现没有处理程序处理请求，则应抛出“NoHandlerFoundException”。
299.  
     spring.mvc.view.prefix =＃Spring MVC视图前缀。
300.  
     spring.mvc.view.suffix =＃Spring MVC视图后缀。
301.  
      
302.  
     ＃春季资源处理（ResourceProperties）
303.  
     spring.resources.add-mappings = true＃启用默认资源处理。
304.  
     spring.resources.cache-period =＃资源处理程序服务的资源的缓存期，以秒为单位。
305.  
     spring.resources.chain.cache = true＃在资源链中启用缓存。
306.  
     spring.resources.chain.enabled =＃启用Spring资源处理链。默认情况下禁用，除非至少有一种策略已启用。
307.  
     spring.resources.chain.html-application-cache = false＃启用HTML5应用程序缓存清单重写。
308.  
     spring.resources.chain.strategy.content.enabled = false＃启用内容版本策略。
309.  
     spring.resources.chain.strategy.content.paths = / **＃应用于版本策略的逗号分隔的模式列表。
310.  
     spring.resources.chain.strategy.fixed.enabled = false＃启用固定版本策略。
311.  
     spring.resources.chain.strategy.fixed.paths =＃应用于版本策略的逗号分隔模式列表。
312.  
     spring.resources.chain.strategy.fixed.version =＃用于版本策略的版本字符串。
313.  
     spring.resources.static-locations = classpath：/ META-INF / resources /，classpath：/ resources /，classpath：/ static /，classpath：/ public /＃静态资源的位置。
314.  
      
315.  
     ＃SPRING SOCIAL（SocialWebAutoConfiguration）
316.  
     spring.social.auto-connection-views = false＃为支持的提供商启用连接状态视图。
317.  
      
318.  
     ＃SPRING SOCIAL FACEBOOK（FacebookAutoConfiguration）
319.  
     spring.social.facebook.app-id =＃您的应用程序的Facebook应用程序ID
320.  
     spring.social.facebook.app-secret =＃你的应用程序的Facebook App Secret
321.  
      
322.  
     ＃SPRING SOCIAL LINKEDIN（LinkedInAutoConfiguration）
323.  
     spring.social.linkedin.app-id =＃您的应用程序的LinkedIn应用程序ID
324.  
     spring.social.linkedin.app-secret =＃你的应用的LinkedIn App Secret
325.  
      
326.  
     ＃SPRING SOCIAL TWITTER（TwitterAutoConfiguration）
327.  
     spring.social.twitter.app-id =＃你的应用程序的Twitter应用程序ID
328.  
     spring.social.twitter.app-secret =＃你的应用程序的Twitter App Secret
329.  
      
330.  
     ＃THYMELEAF（ThymeleafAutoConfiguration）
331.  
     spring.thymeleaf.cache = true＃启用模板缓存。
332.  
     spring.thymeleaf.check-template-location = true＃检查模板位置是否存在。
333.  
     spring.thymeleaf.content-type = text / html＃Content-Type值。
334.  
     spring.thymeleaf.enabled = true＃启用MVC Thymeleaf视图分辨率。
335.  
     spring.thymeleaf.encoding = UTF-8＃模板编码。
336.  
     spring.thymeleaf.excluded-view-names =＃应该从分辨率中排除的逗号分隔的视图名称列表。
337.  
     spring.thymeleaf.mode = HTML5＃应用于模板的模板模式。另请参阅StandardTemplateModeHandlers。
338.  
     spring.thymeleaf.prefix = classpath：/ templates /＃构建URL时预先查看名称的前缀。
339.  
     spring.thymeleaf.suffix = .html＃在构建URL时附加到视图名称的后缀。
340.  
     spring.thymeleaf.template-resolver-order =＃链中模板解析器的顺序。
341.  
     spring.thymeleaf.view-names =＃可以解析的视图名称的逗号分隔列表。
342.  
      
343.  
     ＃速度模板（VelocityAutoConfiguration）
344.  
     spring.velocity.allow-request-override = false＃设置是否允许HttpServletRequest属性覆盖（隐藏）具有相同名称的控制器生成的模型属性。
345.  
     spring.velocity.allow-session-override = false＃设置是否允许HttpSession属性覆盖（隐藏）具有相同名称的控制器生成的模型属性。
346.  
     spring.velocity.cache =＃启用模板缓存。
347.  
     spring.velocity.charset = UTF-8＃模板编码。
348.  
     spring.velocity.check-template-location = true＃检查模板位置是否存在。
349.  
     spring.velocity.content-type = text / html＃Content-Type值。
350.  
     spring.velocity.date-tool-attribute =＃要在视图的Velocity上下文中公开的DateTool辅助对象的名称。
351.  
     spring.velocity.enabled = true＃为此技术启用MVC视图分辨率。
352.  
     spring.velocity.expose-request-attributes = false＃设置在与模板合并之前是否应将所有请求属性添加到模型中。
353.  
     spring.velocity.expose-session-attributes = false＃设置在与模板合并之前是否应将所有HttpSession属性添加到模型中。
354.  
     spring.velocity.expose-spring-macro-helpers = true＃设置是否公开名为“springMacroRequestContext”的供Spring的宏库使用的RequestContext。
355.  
     spring.velocity.number-tool-attribute =＃要在视图的Velocity上下文中公开的NumberTool帮助程序对象的名称。
356.  
     spring.velocity.prefer-file-system-access = true＃首选文件系统访问模板加载。文件系统访问使模板更改的热检测成为可能。
357.  
     spring.velocity.prefix =＃构建URL时预先查看名称的前缀。
358.  
     spring.velocity.properties.* =＃附加速度属性。
359.  
     spring.velocity.request-context-attribute =＃所有视图的RequestContext属性的名称。
360.  
     spring.velocity.resource-loader-path = classpath：/ templates /＃模板路径。
361.  
     spring.velocity.suffix = .vm＃构建URL时附加到视图名称的后缀。
362.  
     spring.velocity.toolbox-config-location =＃Velocity Toolbox配置位置。例如`/ WEB-INF / toolbox.xml`
363.  
     spring.velocity.view-names =＃可以解析的视图名称的白名单。
364.  
      
365.  
      
366.  
      
367.  
     ＃----------------------------------------
368.  
     ＃安全特性
369.  
     ＃----------------------------------------
370.  
     ＃安全（SecurityProperties）
371.  
     security.basic.authorize-mode = role＃安全授权模式。
372.  
     security.basic.enabled = true＃启用基本认证。
373.  
     security.basic.path = / **＃以逗号分隔的安全路径列表。
374.  
     security.basic.realm = Spring＃HTTP基本领域名称。
375.  
     security.enable-csrf = false＃启用跨站点请求伪造支持。
376.  
     security.filter-order = 0＃安全过滤器链顺序。
377.  
     security.filter-dispatcher-types = ASYNC，FORWARD，INCLUDE，REQUEST＃安全性筛选器链调度程序类型。
378.  
     security.headers.cache = true＃启用缓存控制HTTP标头。
379.  
     security.headers.content-type = true＃启用“X-Content-Type-Options”标题。
380.  
     security.headers.frame = true＃启用“X-Frame-Options”标题。
381.  
     security.headers.hsts =＃HTTP严格传输安全（HSTS）模式（无，域，全部）。
382.  
     security.headers.xss = true＃启用跨站点脚本（XSS）保护。
383.  
     security.ignored =＃从逗号分隔的默认安全路径中排除的路径列表。
384.  
     security.require-ssl = false＃为所有请求启用安全通道。
385.  
     security.sessions =无状态＃会话创建策略（永远，从不，if_required，无状态）。
386.  
     security.user.name = user＃默认用户名。
387.  
     security.user.password =＃默认用户名的密码。默认情况下会在启动时记录随机密码。
388.  
     security.user.role = USER＃授予默认用户名的角色。
389.  
      
390.  
     ＃SECURITY OAUTH2客户端（OAuth2ClientProperties
391.  
     security.oauth2.client.client-id =＃OAuth2客户端ID。
392.  
     security.oauth2.client.client-secret =＃OAuth2客户端密钥。随机秘密是默认生成的
393.  
      
394.  
     ＃SECURITY OAUTH2 RESOURCES（ResourceServerProperties
395.  
     security.oauth2.resource.id =＃资源的标识符。
396.  
     security.oauth2.resource.jwt.key-uri =＃JWT令牌的URI。如果该值不可用并且密钥是公开的，可以设置。
397.  
     security.oauth2.resource.jwt.key-value =＃JWT令牌的验证密钥。可以是对称密钥或PEM编码的RSA公钥。
398.  
     security.oauth2.resource.prefer-token-info = true＃使用token info，可以设置为false来使用用户信息。
399.  
     security.oauth2.resource.service-id =资源＃
400.  
     security.oauth2.resource.token-info-uri =＃令牌解码端点的URI。
401.  
     security.oauth2.resource.token-type =＃使用userInfoUri时要发送的令牌类型。
402.  
     security.oauth2.resource.user-info-uri =＃用户端点的URI。
403.  
      
404.  
     ＃SECURITY OAUTH2 SSO（OAuth2SsoProperties
405.  
     security.oauth2.sso.filter-order =＃如果不提供显式的WebSecurityConfigurerAdapter
406.  
     security.oauth2.sso.login-path = / login＃登录页面的路径，即触发重定向到OAuth2授权服务器的路径
407.  
      
408.  
      
409.  
     ＃----------------------------------------
410.  
     ＃数据属性
411.  
     ＃----------------------------------------
412.  
      
413.  
     ＃FLYWAY（FlywayProperties）
414.  
     flyway.baseline-description =＃
415.  
     flyway.baseline-version = 1＃版本开始迁移
416.  
     flyway.baseline-on-migrate =＃
417.  
     flyway.check-location = false＃检查是否存在迁移脚本位置。
418.  
     flyway.clean-on-validation-error =＃
419.  
     flyway.enabled = true＃启用飞路。
420.  
     flyway.encoding =＃
421.  
     flyway.ignore-failed-future-migration =＃
422.  
     flyway.init-sqls =＃SQL语句在获取它之后立即执行以初始化连接。
423.  
     flyway.locations = classpath：db / migration＃迁移脚本的位置
424.  
     flyway.out-of-order =＃
425.  
     flyway.password =＃如果您希望Flyway创建自己的DataSource，则使用JDBC密码
426.  
     flyway.placeholder-prefix =＃
427.  
     flyway.placeholder-replacement =＃
428.  
     flyway.placeholder-suffix =＃
429.  
     flyway.placeholders。* =＃
430.  
     flyway.schemas =＃模式更新
431.  
     flyway.sql-migration-prefix = V＃
432.  
     flyway.sql-migration-separator =＃
433.  
     flyway.sql-migration-suffix = .sql＃
434.  
     flyway.table =＃
435.  
     flyway.url =＃要迁移的数据库的JDBC URL。如果未设置，则使用主要配置的数据源。
436.  
     flyway.user =＃登录要迁移的数据库的用户。
437.  
     flyway.validate-on-migrate =＃
438.  
      
439.  
     ＃LIQUIBASE（LiquibaseProperties）
440.  
     liquibase.change-log = classpath：/db/changelog/db.changelog-master.yaml＃更改日志配置路径。
441.  
     liquibase.check-change-log-location = true＃检查更改日志位置是否存在。
442.  
     liquibase.contexts =＃使用运行时上下文的逗号分隔列表。
443.  
     liquibase.default-schema =＃默认数据库模式。
444.  
     liquibase.drop-first = false＃首先删除数据库模式。
445.  
     liquibase.enabled = true＃启用liquibase支持。
446.  
     liquibase.labels =＃使用运行时标签的逗号分隔列表。
447.  
     liquibase.parameters。* =＃更改日志参数。
448.  
     liquibase.password =＃登录要迁移的数据库的密码。
449.  
     liquibase.url =＃要迁移的数据库的JDBC URL。如果未设置，则使用主要配置的数据源。
450.  
     liquibase.user =＃登录要迁移的数据库的用户。
451.  
      
452.  
     ＃DAO（PersistenceExceptionTranslationAutoConfiguration）
453.  
     spring.dao.exceptiontranslation.enabled = true＃启用PersistenceExceptionTranslationPostProcessor。
454.  
      
455.  
     ＃CASSANDRA（CassandraProperties）
456.  
     spring.data.cassandra.cluster-name =＃Cassandra集群的名称。
457.  
     spring.data.cassandra.compression =＃Cassandra二进制协议支持的压缩。
458.  
     spring.data.cassandra.connect-timeout-millis =＃套接字选项：连接超时。
459.  
     spring.data.cassandra.consistency-level =＃查询一致性级别。
460.  
     spring.data.cassandra.contact-points = localhost＃群集节点地址的逗号分隔列表。
461.  
     spring.data.cassandra.fetch-size =＃查询默认获取大小。
462.  
     spring.data.cassandra.keyspace-name =＃使用的Keyspace名称。
463.  
     spring.data.cassandra.load-balancing-policy =＃负载均衡策略的类名称。
464.  
     spring.data.cassandra.port =＃Cassandra服务器的端口。
465.  
     spring.data.cassandra.password =＃登录服务器的密码。
466.  
     spring.data.cassandra.read-timeout-millis =＃套接字选项：读取超时。
467.  
     spring.data.cassandra.reconnection-policy =＃重新连接策略类。
468.  
     spring.data.cassandra.retry-policy =＃重试策略的类名称。
469.  
     spring.data.cassandra.serial-consistency-level =＃查询串行一致性级别。
470.  
     spring.data.cassandra.ssl = false＃启用SSL支持。
471.  
     spring.data.cassandra.username =＃服务器的登录用户。
472.  
      
473.  
     ＃ELASTICSEARCH（ElasticsearchProperties）
474.  
     spring.data.elasticsearch.cluster-name = elasticsearch＃Elasticsearch集群名称。
475.  
     spring.data.elasticsearch.cluster-nodes =＃以逗号分隔的集群节点地址列表。如果未指定，则启动客户机节点。
476.  
     spring.data.elasticsearch.properties。* =＃用于配置客户端的其他属性。
477.  
     spring.data.elasticsearch.repositories.enabled = true＃启用Elasticsearch存储库。
478.  
      
479.  
     ＃MONGODB（MongoProperties）
480.  
     spring.data.mongodb.authentication-database =＃认证数据库名称。
481.  
     spring.data.mongodb.database = test＃数据库名称。
482.  
     spring.data.mongodb.field -naming-strategy =＃要使用的FieldNamingStrategy的完全限定名称。
483.  
     spring.data.mongodb.grid-fs-database =＃GridFS数据库名称。
484.  
     spring.data.mongodb.host = localhost＃Mongo服务器主机。
485.  
     spring.data.mongodb.password =＃登录mongo服务器的密码。
486.  
     spring.data.mongodb.port = 27017＃Mongo服务器端口。
487.  
     spring.data.mongodb.repositories.enabled = true＃启用Mongo存储库。
488.  
     spring.data.mongodb.uri = mongodb：// localhost / test＃Mongo数据库URI。设置时，主机和端口将被忽略。
489.  
     spring.data.mongodb.username =＃mongo服务器的登录用户。
490.  
      
491.  
     ＃数据REST（RepositoryRestProperties）
492.  
     spring.data.rest.base-path =＃Spring Data REST用于公开资源库资源的基本路径。
493.  
     spring.data.rest.default-page-size =＃页面的默认大小。
494.  
     spring.data.rest.enable-enum-translation =＃通过Spring Data REST默认资源包启用枚举值转换。
495.  
     spring.data.rest.limit-param-name =＃URL查询字符串参数的名称，表示一次返回多少个结果。
496.  
     spring.data.rest.max-page-size =＃页面的最大尺寸。
497.  
     spring.data.rest.page-param-name =＃指示要返回哪个页面的URL查询字符串参数的名称。
498.  
     spring.data.rest.return-body-on-create =＃创建实体后返回响应主体。
499.  
     spring.data.rest.return-body-on-update =＃更新实体后返回响应主体。
500.  
     spring.data.rest.sort-param-name =＃指示排序结果的方向的URL查询字符串参数的名称。
501.  
      
502.  
     ＃SOLR（SolrProperties）
503.  
     spring.data.solr.host = http：//127.0.0.1：8983 / solr＃Solr主机。如果设置了“zk-host”，则忽略。
504.  
     spring.data.solr.repositories.enabled = true＃启用Solr存储库。
505.  
     spring.data.solr.zk-host =＃HOST：PORT形式的＃ZooKeeper主机地址。
506.  
      
507.  
     ＃DATASOURCE（DataSourceAutoConfiguration＆DataSourceProperties）
508.  
     spring.datasource.continue-on-error = false＃如果在初始化数据库时发生错误，请不要停止。
509.  
     spring.datasource.data =＃数据（DML）脚本资源参考。
510.  
     spring.datasource.driver-class-name =＃JDBC驱动程序的完全限定名称。默认情况下基于URL自动检测。
511.  
     spring.datasource.initialize = true＃使用'data.sql'填充数据库。
512.  
     spring.datasource.jmx-enabled = false＃启用JMX支持（如果由底层池提供）。
513.  
     spring.datasource.jndi-name =＃数据源的JNDI位置。设置时会忽略类，网址，用户名和密码。
514.  
     spring.datasource.max-active =＃例如100
515.  
     spring.datasource.max-idle =＃例如8
516.  
     spring.datasource.max等待=
517.  
     spring.datasource.min-evictable空闲时间-米利斯=
518.  
     spring.datasource.min空闲= 8
519.  
     spring.datasource.name = testdb＃数据源的名称。
520.  
     spring.datasource.password =＃登录数据库的密码。
521.  
     spring.datasource.platform = all＃架构资源中使用的平台（架构 - $ {platform} .sql）。
522.  
     spring.datasource.schema =＃架构（DDL）脚本资源引用。
523.  
     spring.datasource.separator =; ＃SQL初始化脚本中的语句分隔符。
524.  
     spring.datasource.sql-script-encoding =＃SQL脚本编码。
525.  
     spring.datasource.test-on-borrow =＃例如`false`
526.  
     spring.datasource.test-on-return =＃例如`false`
527.  
     spring.datasource.test-while-idle =＃
528.  
     spring.datasource.time-between-eviction-runs-millis = 1
529.  
     spring.datasource.type =＃要使用的连接池实现的完全限定名称。默认情况下，它是从类路径中自动检测的。
530.  
     spring.datasource.url =＃数据库的JDBC URL。
531.  
     spring.datasource.username =
532.  
     spring.datasource.validation查询=
533.  
      
534.  
     ＃H2 Web控制台（H2ConsoleProperties）
535.  
     spring.h2.console.enabled = false＃启用控制台。
536.  
     spring.h2.console.path = / h2-console＃控制台可用的路径。
537.  
      
538.  
     ＃JOOQ（JooqAutoConfiguration）
539.  
     spring.jooq.sql-dialect =＃与配置的数据源进行通信时使用的SQLDialect JOOQ。例如`POSTGRES`
540.  
      
541.  
     ＃JPA（JpaBaseConfiguration，HibernateJpaAutoConfiguration）
542.  
     spring.data.jpa.repositories.enabled = true＃启用JPA存储库。
543.  
     spring.jpa.database =＃目标数据库进行操作，默认为自动检测。可以使用“databasePlatform”属性进行替代设置。
544.  
     spring.jpa.database-platform =＃要运行的目标数据库的名称，默认为自动检测。也可以使用“数据库”枚举进行设置。
545.  
     spring.jpa.generate-ddl = false＃启动时初始化模式。
546.  
     spring.jpa.hibernate.ddl-auto =＃DDL模式。这实际上是“hibernate.hbm2ddl.auto”属性的快捷方式。使用嵌入式数据库时默认为“创建 - 删除”，否则为“无”。
547.  
     spring.jpa.hibernate.naming-strategy =＃命名策略完全限定名称。
548.  
     spring.jpa.open-in-view = true＃注册OpenEntityManagerInViewInterceptor。将JPA EntityManager绑定到线程，以完成请求的整个处理。
549.  
     spring.jpa.properties。* =＃在JPA提供程序上设置的其他本机属性。
550.  
     spring.jpa.show-sql = false＃启用SQL语句的日志记录。
551.  
      
552.  
     ＃JTA（JtaAutoConfiguration）
553.  
     spring.jta.log-dir =＃事务日志目录。
554.  
      
555.  
     ＃ATOMIKOS
556.  
     spring.jta.checkpoint-interval = 500＃检查点之间的间隔。
557.  
     spring.jta.console-file-count = 1＃可以创建的调试日志文件的数量。
558.  
     spring.jta.console-file-limit = -1＃调试日志文件中最多可以存储多少个字节。
559.  
     spring.jta.console-file-name = tm.out＃调试日志文件名。
560.  
     spring.jta.console-log-level =＃控制台日志级别。
561.  
     spring.jta.default-jta-timeout = 10000＃JTA事务的默认超时。
562.  
     spring.jta.enable-logging = true＃启用磁盘日志记录。
563.  
     spring.jta.force-shutdown-on-vm-exit = false＃指定VM关闭是否应该触发强制关闭事务内核。
564.  
     spring.jta.log-base-dir =＃应该存储日志文件的目录。
565.  
     spring.jta.log-base-name = tmlog＃事务日志文件的基本名称。
566.  
     spring.jta.max-actives = 50＃活动事务的最大数量。
567.  
     spring.jta.max-timeout = 300000＃可以允许事务处理的最大超时时间（以毫秒为单位）。
568.  
     spring.jta.output-dir =＃用于存储调试日志文件的目录。
569.  
     spring.jta.serial-jta-transactions = true＃指定是否应尽可能地加入子交易。
570.  
     spring.jta.service =＃应该启动的事务管理器实现。
571.  
     spring.jta.threaded-two-phase-commit = true＃在参与资源上使用不同（并发）线程进行两阶段提交。
572.  
     spring.jta.transaction-manager-unique-name =＃事务管理器的唯一名称。
573.  
     spring.jta.atomikos.connectionfactory.borrow-connection-timeout = 30＃用于从池中借用连接的超时，以秒为单位。
574.  
     spring.jta.atomikos.connectionfactory.ignore-session-transacted-flag = true＃创建会话时是否忽略事务处理标志。
575.  
     spring.jta.atomikos.connectionfactory.local-transaction-mode = false＃是否需要本地事务。
576.  
     spring.jta.atomikos.connectionfactory.maintenance-interval = 60＃池的维护线程运行之间的时间，以秒为单位。
577.  
     spring.jta.atomikos.connectionfactory.max-idle-time = 60＃从池中清除连接之后的时间，以秒为单位。
578.  
     spring.jta.atomikos.connectionfactory.max-lifetime = 0＃以秒为单位的连接可以在被销毁前汇集的时间。0表示没有限制。
579.  
     spring.jta.atomikos.connectionfactory.max-pool-size = 1＃池的最大尺寸。
580.  
     spring.jta.atomikos.connectionfactory.min-pool-size = 1＃池的最小大小。
581.  
     spring.jta.atomikos.connectionfactory.reap-timeout = 0＃借用连接的收获超时（以秒为单位）。0表示没有限制。
582.  
     spring.jta.atomikos.connectionfactory.unique-resource-name = jmsConnectionFactory＃在恢复期间用于标识资源的唯一名称。
583.  
     spring.jta.atomikos.datasource.borrow-connection-timeout = 30＃用于从池中借用连接的超时，以秒为单位。
584.  
     spring.jta.atomikos.datasource.default-isolation-level =＃池提供的连接的默认隔离级别。
585.  
     spring.jta.atomikos.datasource.login-timeout =＃建立数据库连接的超时时间，以秒为单位。
586.  
     spring.jta.atomikos.datasource.maintenance-interval = 60＃池维护线程运行之间的时间（以秒为单位）。
587.  
     spring.jta.atomikos.datasource.max-idle-time = 60＃从池中清除连接之后的时间，以秒为单位。
588.  
     spring.jta.atomikos.datasource.max-lifetime = 0＃以秒为单位的连接可以在被销毁前汇集的时间。0表示没有限制。
589.  
     spring.jta.atomikos.datasource.max-pool-size = 1＃池的最大尺寸。
590.  
     spring.jta.atomikos.datasource.min-pool-size = 1＃池的最小大小。
591.  
     spring.jta.atomikos.datasource.reap-timeout = 0＃借用连接的收获超时（以秒为单位）。0表示没有限制。
592.  
     spring.jta.atomikos.datasource.test-query =＃返回之前用于验证连接的SQL查询或语句。
593.  
     spring.jta.atomikos.datasource.unique-resource-name = dataSource＃在恢复期间用于标识资源的唯一名称。
594.  
      
595.  
     ＃BITRONIX
596.  
     spring.jta.allow-multiple-lrc = false＃允许多个LRC资源登记到同一个事务中。
597.  
     spring.jta.asynchronous2-pc = false＃启用异步执行两阶段提交。
598.  
     spring.jta.background-recovery-interval-seconds = 60＃在后台运行恢复进程的时间间隔（以秒为单位）。
599.  
     spring.jta.current-node-only-recovery = true＃仅恢复当前节点。
600.  
     spring.jta.debug-zero-resource-transaction = false＃记录创建和提交调用堆栈的事务执行没有一个登记资源。
601.  
     spring.jta.default-transaction-timeout = 60＃以秒为单位的默认事务超时。
602.  
     spring.jta.disable-jmx = false＃启用JMX支持。
603.  
     spring.jta.exception-analyzer =＃设置要使用的异常分析器实现的完全限定名称。
604.  
     spring.jta.filter-log-status = false＃启用对日志的过滤，以便仅写入强制日志。
605.  
     spring.jta.force-batching-enabled = true＃设置是否对磁盘部队进行批处理。
606.  
     spring.jta.forced-write-enabled = true＃设置日志是否强制为磁盘。
607.  
     spring.jta.graceful-shutdown-interval = 60＃TM在关闭时间终止事务之前等待事务完成的最大时间量。
608.  
     spring.jta.jndi-transaction-synchronization-registry-name =＃TransactionSynchronizationRegistry的JNDI名称。
609.  
     spring.jta.jndi-user-transaction-name =＃UserTransaction的JNDI名称。
610.  
     spring.jta.journal = disk＃期刊的名称。可以是'磁盘'，'空'或类名。
611.  
     spring.jta.log-part1-filename = btm1.tlog＃日志的第一个片段的名称。
612.  
     spring.jta.log-part2-filename = btm2.tlog＃日志的第二个片段的名称。
613.  
     spring.jta.max-log-size-in-mb = 2＃日志片段的最大大小（以兆字节为单位）。
614.  
     spring.jta.resource-configuration-filename =＃ResourceLoader配置文件名。
615.  
     spring.jta.server-id =＃必须唯一标识此TM实例的ASCII ID。默认为机器的IP地址。
616.  
     spring.jta.skip-corrupted-logs = false＃跳过损坏的事务日志条目。
617.  
     spring.jta.warn-about-zero-resource-transaction = true＃为未执行单个登记资源的事务记录警告。
618.  
     spring.jta.bitronix.connectionfactory.acquire-increment = 1＃增长池时创建的连接数。
619.  
     spring.jta.bitronix.connectionfactory.acquisition-interval = 1＃在获取无效连接后尝试重新获取连接之前，需要等待的时间（以秒为单位）。
620.  
     spring.jta.bitronix.connectionfactory.acquisition-timeout = 30＃以秒为单位的超时时间，用于从池中获取连接。
621.  
     spring.jta.bitronix.connectionfactory.allow-local-transactions = true＃事务管理器是否应允许混合XA和非XA事务。
622.  
     spring.jta.bitronix.connectionfactory.apply-transaction-timeout = false＃在登记时是否应在XAResource上设置事务超时。
623.  
     spring.jta.bitronix.connectionfactory.automatic-enlisting-enabled = true＃资源是否应该自动登记和除名。
624.  
     spring.jta.bitronix.connectionfactory.cache-producer-consumers = true＃是否生产和消费者应该被缓存。
625.  
     spring.jta.bitronix.connectionfactory.defer-connection-release = true＃提供者是否可以在同一连接上运行多个事务并支持事务交叉。
626.  
     spring.jta.bitronix.connectionfactory.ignore-recovery-failures = false＃是否应该忽略恢复失败。
627.  
     spring.jta.bitronix.connectionfactory.max-idle-time = 60＃连接从池中清理之后的时间，以秒为单位。
628.  
     spring.jta.bitronix.connectionfactory.max-pool-size = 10＃池的最大尺寸。0表示没有限制。
629.  
     spring.jta.bitronix.connectionfactory.min-pool-size = 0＃池的最小大小。
630.  
     spring.jta.bitronix.connectionfactory.password =＃用于连接到JMS提供程序的密码。
631.  
     spring.jta.bitronix.connectionfactory.share-transaction-connections = false＃是否可以在事务上下文中共享ACCESSIBLE状态下的连接。
632.  
     spring.jta.bitronix.connectionfactory.test-connections = true＃是否应该从池中获取连接时测试连接。
633.  
     spring.jta.bitronix.connectionfactory.two-pc-ordering-position = 1＃这个资源在两阶段提交期间应该采取的位置（总是首先是Integer.MIN_VALUE，总是最后是Integer.MAX_VALUE）。
634.  
     spring.jta.bitronix.connectionfactory.unique-name = jmsConnectionFactory＃在恢复期间用于标识资源的唯一名称。
635.  
     spring.jta.bitronix.connectionfactory.use-tm-join = true在启动XAResources时是否应该使用TMJOIN。
636.  
     spring.jta.bitronix.connectionfactory.user =＃用于连接到JMS提供者的用户。
637.  
     spring.jta.bitronix.datasource.acquire-increment = 1＃增长池时创建的连接数。
638.  
     spring.jta.bitronix.datasource.acquisition-interval = 1＃在获取无效连接后，尝试再次获取连接之前的等待时间，以秒为单位。
639.  
     spring.jta.bitronix.datasource.acquisition-timeout = 30＃以秒为单位超时获取池中的连接。
640.  
     spring.jta.bitronix.datasource.allow-local-transactions = true＃事务管理器是否应允许混合XA和非XA事务。
641.  
     spring.jta.bitronix.datasource.apply-transaction-timeout = false＃在注册时是否应该在XAResource上设置事务超时。
642.  
     spring.jta.bitronix.datasource.automatic-enlisting-enabled = true＃资源是否应该自动登记和除名。
643.  
     spring.jta.bitronix.datasource.cursor-holdability =＃连接的默认光标可保存性。
644.  
     spring.jta.bitronix.datasource.defer-connection-release = true＃数据库是否可以在同一连接上运行多个事务并支持事务交叉。
645.  
     spring.jta.bitronix.datasource.enable -jdbc4-connection-test =＃是否在从池中获取连接时调用Connection.isValid（）。
646.  
     spring.jta.bitronix.datasource.ignore-recovery-failures = false＃是否应该忽略恢复失败。
647.  
     spring.jta.bitronix.datasource.isolation-level =＃连接的默认隔离级别。
648.  
     spring.jta.bitronix.datasource.local-auto-commit =＃本地事务的默认自动提交模式。
649.  
     spring.jta.bitronix.datasource.login-timeout =＃建立数据库连接的超时时间，以秒为单位。
650.  
     spring.jta.bitronix.datasource.max-idle-time = 60＃从池中清除连接之后的时间，以秒为单位。
651.  
     spring.jta.bitronix.datasource.max-pool-size = 10＃池的最大尺寸。0表示没有限制。
652.  
     spring.jta.bitronix.datasource.min-pool-size = 0＃池的最小尺寸。
653.  
     spring.jta.bitronix.datasource.prepared-statement-cache-size = 0＃准备好的语句缓存的目标大小。0禁用缓存。
654.  
     spring.jta.bitronix.datasource.share-transaction-connections = false＃是否可以在事务上下文中共享ACCESSIBLE状态下的连接。
655.  
     spring.jta.bitronix.datasource.test-query =＃返回之前用于验证连接的SQL查询或语句。
656.  
     spring.jta.bitronix.datasource.two-pc-ordering-position = 1＃这个资源在两阶段提交期间应该采用的位置（总是首先是Integer.MIN_VALUE，总是最后是Integer.MAX_VALUE）。
657.  
     spring.jta.bitronix.datasource.unique-name = dataSource＃在恢复期间用于标识资源的唯一名称。
658.  
     spring.jta.bitronix.datasource.use-tm-join = true在启动XAResources时是否应使用TMJOIN。
659.  
      
660.  
     ＃EMBEDDED MONGODB（EmbeddedMongoProperties）
661.  
     spring.mongodb.embedded.features = SYNC_DELAY＃要启用的功能的逗号分隔列表。
662.  
     spring.mongodb.embedded.version = 2.6.10＃使用Mongo版本。
663.  
      
664.  
     ＃REDIS（RedisProperties）
665.  
     spring.redis.database = 0＃连接工厂使用的数据库索引。
666.  
     spring.redis.host = localhost＃Redis服务器主机。
667.  
     spring.redis.password =＃登录redis服务器的密码。
668.  
     spring.redis.pool.max-active = 8＃池在给定时间可以分配的最大连接数。使用负值无限制。
669.  
     spring.redis.pool.max-idle = 8＃池中“空闲”连接的最大数量。使用负值表示无限数量的空闲连接。
670.  
     spring.redis.pool.max-wait = -1＃连接分配在池耗尽时抛出异常之前应阻塞的最长时间量（以毫秒为单位）。使用负值可以无限期地阻止。
671.  
     spring.redis.pool.min-idle = 0＃目标为保持在池中的最小空闲连接数。如果该设置是肯定的，则该设置仅起作用。
672.  
     spring.redis.port = 6379＃Redis服务器端口。
673.  
     spring.redis.sentinel.master =＃Redis服务器的名称。
674.  
     spring.redis.sentinel.nodes =＃主机：端口对的逗号分隔列表。
675.  
     spring.redis.timeout = 0＃连接超时（以毫秒为单位）。
676.  
      
677.  
      
678.  
     ＃----------------------------------------
679.  
     ＃整合特性
680.  
     ＃----------------------------------------
681.  
      
682.  
     ＃ACTIVEMQ（ActiveMQProperties）
683.  
     spring.activemq.broker-url =＃ActiveMQ代理的URL。自动生成默认。例如`tcp：// localhost：61616`
684.  
     spring.activemq.in-memory = true＃指定默认代理URL是否应该在内存中。如果指定了明确的代理，则忽略。
685.  
     spring.activemq.password =＃登录经纪人的密码。
686.  
     spring.activemq.pooled = false＃指定是否应创建PooledConnectionFactory而不是常规的ConnectionFactory。
687.  
     spring.activemq.user =＃代理的登录用户。
688.  
      
689.  
     ＃ARTEMIS（ArtemisProperties）
690.  
     spring.artemis.embedded.cluster-password =＃集群密码。默认情况下在启动时随机生成。
691.  
     spring.artemis.embedded.data-directory =＃日记文件目录。如果关闭持久性，则不需要。
692.  
     spring.artemis.embedded.enabled = true＃如果Artemis服务器API可用，则启用嵌入模式。
693.  
     spring.artemis.embedded.persistent = false＃启用持久存储。
694.  
     spring.artemis.embedded.queues =＃在启动时创建的逗号分隔列表。
695.  
     spring.artemis.embedded.server-id =＃服务器ID。默认情况下，使用自动递增的计数器。
696.  
     spring.artemis.embedded.topics =＃启动时要创建的主题的逗号分隔列表。
697.  
     spring.artemis.host = localhost＃阿蒂米斯经纪人主机。
698.  
     spring.artemis.mode =＃Artemis部署模式，默认为自动检测。可以明确设置为“本地”或“嵌入”。
699.  
     spring.artemis.port = 61616＃阿蒂米斯经纪人港口。
700.  
      
701.  
     ＃SPRING BATCH（BatchProperties）
702.  
     spring.batch.initializer.enabled = true＃如果需要，在启动时创建所需的批处理表。
703.  
     spring.batch.job.enabled = true＃启动时执行上下文中的所有Spring批处理作业。
704.  
     spring.batch.job.names =＃逗号分隔的启动时要执行的作业名称列表（例如`job1，job2`）。默认情况下，执行在上下文中找到的所有作业。
705.  
     spring.batch.schema = classpath：org / springframework / batch / core / schema - @@ platform @@。sql＃用于初始化数据库模式的SQL文件的路径。
706.  
     spring.batch.table-prefix =＃所有批量元数据表的表前缀。
707.  
      
708.  
     ＃HORNETQ（HornetQProperties）
709.  
     spring.hornetq.embedded.cluster-password =＃集群密码。默认情况下在启动时随机生成。
710.  
     spring.hornetq.embedded.data-directory =＃日记文件目录。如果关闭持久性，则不需要。
711.  
     spring.hornetq.embedded.enabled = true＃如果HornetQ服务器API可用，则启用嵌入模式。
712.  
     spring.hornetq.embedded.persistent = false＃启用持久存储。
713.  
     spring.hornetq.embedded.queues =＃在启动时创建的逗号分隔列表。
714.  
     spring.hornetq.embedded.server-id =＃服务器ID。默认情况下，使用自动递增的计数器。
715.  
     spring.hornetq.embedded.topics =＃在启动时创建的以逗号分隔的主题列表。
716.  
     spring.hornetq.host = localhost＃HornetQ代理主机。
717.  
     spring.hornetq.mode =＃HornetQ部署模式，默认为自动检测。可以明确设置为“本地”或“嵌入”。
718.  
     spring.hornetq.port = 5445＃HornetQ经纪人端口。
719.  
      
720.  
     ＃JMS（JmsProperties）
721.  
     spring.jms.jndi-name =＃连接工厂的JNDI名称。设置时，优先于其他连接工厂自动配置。
722.  
     spring.jms.listener.acknowledge-mode =＃容器的确认模式。默认情况下，侦听器通过自动确认进行事务处理。
723.  
     spring.jms.listener.auto-startup = true＃启动时自动启动容器。
724.  
     spring.jms.listener.concurrency =＃最小并发消费者数量。
725.  
     spring.jms.listener.max-concurrency =＃最大并发消费者数量。
726.  
     spring.jms.pub-sub-domain = false＃指定默认目标类型是否为主题。
727.  
      
728.  
     ＃兔子（兔子属性）
729.  
     spring.rabbitmq.addresses =＃客户端应连接到的地址的逗号分隔列表。
730.  
     spring.rabbitmq.dynamic = true＃创建一个AmqpAdmin bean。
731.  
     spring.rabbitmq.host = localhost＃RabbitMQ主机。
732.  
     spring.rabbitmq.listener.acknowledge-mode =＃容器的确认模式。
733.  
     spring.rabbitmq.listener.auto-startup = true＃启动时自动启动容器。
734.  
     spring.rabbitmq.listener.concurrency =＃消费者的最小数量。
735.  
     spring.rabbitmq.listener.max-concurrency =＃消费者的最大数量。
736.  
     spring.rabbitmq.listener.prefetch =＃在单个请求中要处理的消息数。它应该大于或等于事务大小（如果使用）。
737.  
     spring.rabbitmq.listener.transaction-size =＃事务中要处理的消息数。为了获得最佳结果，它应该小于或等于预取计数。
738.  
     spring.rabbitmq.password =＃登录对经纪人进行身份验证。
739.  
     spring.rabbitmq.port = 5672＃RabbitMQ端口。
740.  
     spring.rabbitmq.requested-heartbeat =＃请求的心跳超时，以秒为单位; 零为零。
741.  
     spring.rabbitmq.ssl.enabled = false＃启用SSL支持。
742.  
     spring.rabbitmq.ssl.key-store =＃保存SSL证书的密钥存储区的路径。
743.  
     spring.rabbitmq.ssl.key-store-password =＃用于访问密钥存储区的密码。
744.  
     spring.rabbitmq.ssl.trust-store =＃持有SSL证书的信任库。
745.  
     spring.rabbitmq.ssl.trust-store-password =＃用于访问信任存储的密码。
746.  
     spring.rabbitmq.ssl.algorithm =＃使用的SSL算法。默认情况下由rabbit客户端库配置。
747.  
     spring.rabbitmq.username =＃登录用户向代理进行身份验证。
748.  
     spring.rabbitmq.virtual-host =＃连接到代理时使用的虚拟主机。
749.  
      
750.  
      
751.  
     ＃----------------------------------------
752.  
     ＃执行器属性
753.  
     ＃----------------------------------------
754.  
      
755.  
     ＃ENDPOINTS（AbstractEndpoint子类）
756.  
     endpoints.enabled = true＃启用端点。
757.  
     endpoints.sensitive =＃默认的端点敏感设置。
758.  
     endpoints.actuator.enabled = true＃启用端点。
759.  
     endpoints.actuator.path =＃端点URL路径。
760.  
     endpoints.actuator.sensitive = false＃启用端点的安全性。
761.  
     endpoints.autoconfig.enabled =＃启用端点。
762.  
     endpoints.autoconfig.id =＃端点标识符。
763.  
     endpoints.autoconfig.sensitive =＃标记端点是否暴露敏感信息。
764.  
     endpoints.beans.enabled =＃启用端点。
765.  
     endpoints.beans.id =＃端点标识符。
766.  
     endpoints.beans.sensitive =＃标记端点是否暴露敏感信息。
767.  
     endpoints.configprops.enabled =＃启用端点。
768.  
     endpoints.configprops.id =＃端点标识符。
769.  
     endpoints.configprops.keys-to-sanitize =密码，密钥，密钥，。*凭证。*，vcap_services＃应该清理的密钥。键可以是属性以或正则表达式结束的简单字符串。
770.  
     endpoints.configprops.sensitive =＃标记端点是否公开敏感信息。
771.  
     endpoints.docs.curies.enabled = false＃启用居里代。
772.  
     endpoints.docs.enabled = true＃启用执行器文档终结点。
773.  
     endpoints.docs.path = / docs＃
774.  
     endpoints.docs.sensitive = false＃
775.  
     endpoints.dump.enabled =＃启用端点。
776.  
     endpoints.dump.id =＃端点标识符。
777.  
     endpoints.dump.sensitive =＃标记端点是否暴露敏感信息。
778.  
     endpoints.env.enabled =＃启用端点。
779.  
     endpoints.env.id =＃端点标识符。
780.  
     endpoints.env.keys-to-sanitize =密码，密钥，密钥，。*凭证。*，vcap_services＃应该清理的密钥。键可以是属性以或正则表达式结束的简单字符串。
781.  
     endpoints.env.sensitive =＃标记端点是否暴露敏感信息。
782.  
     endpoints.flyway.enabled =＃启用端点。
783.  
     endpoints.flyway.id =＃端点标识符。
784.  
     endpoints.flyway.sensitive =＃标记端点是否暴露敏感信息。
785.  
     endpoints.health.enabled =＃启用端点。
786.  
     endpoints.health.id =＃端点标识符。
787.  
     endpoints.health.mapping。* =＃健康状态到HttpStatus代码的映射。默认情况下，注册的健康状态映射到合理的默认值（即UP地图为200）。
788.  
     endpoints.health.sensitive =＃标记端点是否暴露敏感信息。
789.  
     endpoints.health.time-to-live = 1000＃缓存结果的生存时间（以毫秒为单位）。
790.  
     endpoints.info.enabled =＃启用端点。
791.  
     endpoints.info.id =＃端点标识符。
792.  
     endpoints.info.sensitive =＃标记端点是否暴露敏感信息。
793.  
     endpoints.jolokia.enabled = true＃启用Jolokia端点。
794.  
     endpoints.jolokia.path = / jolokia＃端点URL路径。
795.  
     endpoints.jolokia.sensitive = true＃启用端点的安全性。
796.  
     endpoints.liquibase.enabled =＃启用端点。
797.  
     endpoints.liquibase.id =＃端点标识符。
798.  
     endpoints.liquibase.sensitive =＃标记端点是否暴露敏感信息。
799.  
     endpoints.logfile.enabled = true＃启用端点。
800.  
     endpoints.logfile.path = / logfile＃端点URL路径。
801.  
     endpoints.logfile.sensitive = true＃在端点上启用安全性。
802.  
     endpoints.mappings.enabled =＃启用端点。
803.  
     endpoints.mappings.id =＃端点标识符。
804.  
     endpoints.mappings.sensitive =＃标记端点是否暴露敏感信息。
805.  
     endpoints.metrics.enabled =＃启用端点。
806.  
     endpoints.metrics.filter.enabled = true＃启用度量servlet过滤器。
807.  
     endpoints.metrics.id =＃端点标识符。
808.  
     endpoints.metrics.sensitive =＃标记端点是否暴露敏感信息。
809.  
     endpoints.shutdown.enabled =＃启用端点。
810.  
     endpoints.shutdown.id =＃端点标识符。
811.  
     endpoints.shutdown.sensitive =＃标记端点是否暴露敏感信息。
812.  
     endpoints.trace.enabled =＃启用端点。
813.  
     endpoints.trace.id =＃端点标识符。
814.  
     endpoints.trace.sensitive =＃标记端点是否暴露敏感信息。
815.  
      
816.  
     ＃ENDPOINTS CORS配置（EndpointCorsProperties）
817.  
     endpoints.cors.allow-credentials =＃设置是否支持凭证。未设置时，不支持凭证。
818.  
     endpoints.cors.allowed-headers =＃在请求中允许使用逗号分隔的标题列表。'*'允许所有标题。
819.  
     endpoints.cors.allowed-methods = GET＃逗号分隔的允许的方法列表。'*'允许所有方法。
820.  
     endpoints.cors.allowed-origins =＃逗号分隔的起源列表允许。'*'允许所有的来源。未设置时，CORS支持被禁用。
821.  
     endpoints.cors.exposed-headers =＃逗号分隔的标题列表包含在响应中。
822.  
     endpoints.cors.max-age = 1800＃以秒为单位，客户端可以缓存飞行前请求的响应。
823.  
      
824.  
     ＃JMX ENDPOINT（EndpointMBeanExportProperties）
825.  
     endpoints.jmx.domain =＃JMX域名。如果设置，则使用'spring.jmx.default-domain'的值进行初始化。
826.  
     endpoints.jmx.enabled = true＃启用所有端点的JMX导出。
827.  
     endpoints.jmx.static-names =＃附加到所有表示端点的MBean的ObjectName的静态属性。
828.  
     endpoints.jmx.unique-names = false＃确保ObjectNames在发生冲突时被修改。
829.  
      
830.  
     ＃JOLOKIA（JolokiaProperties）
831.  
     jolokia.config。* =＃请参阅Jolokia手册
832.  
      
833.  
     ＃管理HTTP服务器（ManagementServerProperties）
834.  
     management.add-application-context-header = true＃在每个响应中添加“X-Application-Context”HTTP标头。
835.  
     management.address =＃管理端点应该绑定的网络地址。
836.  
     management.context-path =＃管理端点上下文路径。例如`/执行器'
837.  
     management.port =＃管理端点HTTP端口。默认使用与应用程序相同的端口。
838.  
     management.security.enabled = true＃启用安全性。
839.  
     management.security.role = ADMIN＃访问管理端点所需的角色。
840.  
     management.security.sessions =无状态＃会话创建策略使用（永远，从不，if_required，无状态）。
841.  
      
842.  
     ＃健康指标（以前为健康*）
843.  
     management.health.db.enabled = true＃启用数据库运行状况检查。
844.  
     management.health.defaults.enabled = true＃启用默认运行状况指示器。
845.  
     management.health.diskspace.enabled = true＃启用磁盘空间运行状况检查。
846.  
     management.health.diskspace.path =＃用于计算可用磁盘空间的路径。
847.  
     management.health.diskspace.threshold = 0＃应该可用的最小磁盘空间，以字节为单位。
848.  
     management.health.elasticsearch.enabled = true＃启用elasticsearch运行状况检查。
849.  
     management.health.elasticsearch.indices =＃逗号分隔的索引名称。
850.  
     management.health.elasticsearch.response-timeout = 100＃等待群集响应的时间（以毫秒为单位）。
851.  
     management.health.jms.enabled = true＃启用JMS运行状况检查。
852.  
     management.health.mail.enabled = true＃启用邮件运行状况检查。
853.  
     management.health.mongo.enabled = true＃启用MongoDB运行状况检查。
854.  
     management.health.rabbit.enabled = true＃启用RabbitMQ运行状况检查。
855.  
     management.health.redis.enabled = true＃启用Redis运行状况检查。
856.  
     management.health.solr.enabled = true＃启用Solr运行状况检查。
857.  
     management.health.status.order = DOWN，OUT_OF_SERVICE，UNKNOWN，UP＃以严重性顺序的逗号分隔的健康状态列表。
858.  
      
859.  
     ＃TRACING（（TraceProperties）
860.  
     management.trace.include =请求标题，响应标题，错误＃要包含在跟踪中的项目。
861.  
      
862.  
     ＃远程外壳
863.  
     shell.auth = simple＃认证类型。根据环境自动检测。
864.  
     shell.auth.jaas.domain =我的域#JAAS域。
865.  
     shell.auth.key.path =＃认证密钥的路径。这应该指向一个有效的“.pem”文件。
866.  
     shell.auth.simple.user.name = user＃登录用户。
867.  
     shell.auth.simple.user.password =＃登录密码。
868.  
     shell.auth.spring.roles = ADMIN＃用于登录到CRaSH控制台的所需角色的逗号分隔列表。
869.  
     shell.command-path-patterns = classpath *：/ commands / **，classpath *：/ crash / commands / **＃用于查找命令的模式。
870.  
     shell.command-refresh-interval = -1＃如果需要（以秒为单位），扫描更改并更新命令。
871.  
     shell.config-path-patterns = classpath *：/ crash / *＃用于查找配置的模式。
872.  
     shell.disabled-commands = jpa *，jdbc *，jndi *＃禁用命令的逗号分隔列表。
873.  
     shell.disabled-plugins =＃禁用逗号分隔的插件列表。根据环境，某些插件默认处于禁用状态。
874.  
     shell.ssh.auth-timeout =＃用户将被提示再次登录后的毫秒数。
875.  
     shell.ssh.enabled = true＃启用CRaSH SSH支持。
876.  
     shell.ssh.idle-timeout =＃关闭未使用的连接之后的毫秒数。
877.  
     shell.ssh.key-path =＃SSH服务器密钥的路径。
878.  
     shell.ssh.port = 2000＃SSH端口。
879.  
     shell.telnet.enabled = false＃启用CRaSH telnet支持。如果TelnetPlugin可用，则默认启用。
880.  
     shell.telnet.port = 5000＃Telnet端口。
881.  
      
882.  
     ＃GIT信息
883.  
     spring.git.properties =＃生成的git信息属性文件的资源引用。
884.  
      
885.  
     ＃METRICS EXPORT（MetricExportProperties）
886.  
     spring.metrics.export.aggregate.key-pattern =＃告诉聚合器如何处理源存储库中的密钥的模式。
887.  
     spring.metrics.export.aggregate.prefix =＃全局存储库的前缀（如果处于活动状态）。
888.  
     spring.metrics.export.delay-millis = 5000＃导出刻度之间的延迟（以毫秒为单位）。按照计划将度量标准导出到外部源，并且延迟。
889.  
     spring.metrics.export.enabled = true＃启用度量标准导出的标志（假设MetricWriter可用）。
890.  
     spring.metrics.export.excludes =＃要排除的度量标准名称的模式列表。包含后应用。
891.  
     spring.metrics.export.includes =＃要包含的度量标准名称的模式列表。
892.  
     spring.metrics.export.redis.key = keys.spring.metrics＃Redis存储库导出密钥（如果处于活动状态）。
893.  
     spring.metrics.export.redis.prefix = spring.metrics＃如果处于活动状态，则Redis存储库的前缀。
894.  
     spring.metrics.export.send-latest =＃根据不导出未更改的度量标准值，标记关闭任何可用的优化。
895.  
     spring.metrics.export.statsd.host =＃接收导出指标的statsd服务器的主机。
896.  
     spring.metrics.export.statsd.port = 8125＃接收导出指标的statsd服务器的端口。
897.  
     spring.metrics.export.statsd.prefix =＃statsd导出指标的前缀。
898.  
     spring.metrics.export.triggers。* =＃每个MetricWriter bean名称的特定触发器属性。
899.  
      
900.  
      
901.  
     ＃----------------------------------------
902.  
     ＃DEVTOOLS属性
903.  
     ＃----------------------------------------
904.  
      
905.  
     ＃DEVTOOLS（DevToolsProperties）
906.  
     spring.devtools.livereload.enabled = true＃启用livereload.com兼容服务器。
907.  
     spring.devtools.livereload.port = 35729＃服务器端口。
908.  
     spring.devtools.restart.additional-exclude =＃应该从触发完全重新启动时排除的其他模式。
909.  
     spring.devtools.restart.additional-paths =＃观察更改的其他路径。
910.  
     spring.devtools.restart.enabled = true＃启用自动重启。
911.  
     spring.devtools.restart.exclude = META-INF /行家/ **，META-INF /资源/ **，资源/ **，静态/ **，公共/ **，模板/ **，** / * Test.class，** / * Tests.class，git.properties＃应该排除触发完全重新启动的模式。
912.  
     spring.devtools.restart.poll-interval = 1000＃轮询类路径更改之间等待的时间（以毫秒为单位）。
913.  
     spring.devtools.restart.quiet-period = 400＃触发重新启动之前，没有任何类路径更改所需的安静时间（以毫秒为单位）。
914.  
     spring.devtools.restart.trigger-file =＃特定文件的名称，在更改时会触发重新启动检查。如果未指定，则任何类路径文件更改都将触发重新启动。
915.  
      
916.  
     ＃REMOTE DEVTOOLS（RemoteDevToolsProperties）
917.  
     spring.devtools.remote.context-path = /。~~ spring-boot！〜＃用于处理远程连接的上下文路径。
918.  
     spring.devtools.remote.debug.enabled = true＃启用远程调试支持。
919.  
     spring.devtools.remote.debug.local-port = 8000＃本地远程调试服务器端口。
920.  
     spring.devtools.remote.proxy.host =＃用于连接远程应用程序的代理主机。
921.  
     spring.devtools.remote.proxy.port =＃用于连接远程应用程序的代理端口。
922.  
     spring.devtools.remote.restart.enabled = true＃启用远程重启。
923.  
     spring.devtools.remote.secret =＃建立连接所需的共享密钥（启用远程支持所必需的）。
924.  
     spring.devtools.remote.secret-header-name = X-AUTH-TOKEN＃用于传输共享密钥的HTTP头。