stm32 - 在闪存中的应用程序之后放置引导加载程序
问题描述
我为我的 STM32F042k6 板编写了一个运行良好的引导加载程序。在系统重置时,引导加载程序启动,稍后可以跳转到应用程序。那很棒:)。现在我希望在我的 Flash 中做相反的事情。我希望在 0x08000000 以外的起始地址启动我的引导加载程序,比如说 0x08007000。当我在链接器脚本中进行修改时,无法调试程序。简而言之,我希望将引导加载程序放在 Flash 的末尾。不要忘记,引导加载程序始终是复位后运行的第一个代码。提前感谢您的帮助和评论这是我的链接器脚本:
/* Entry Point */
ENTRY(Boot_Reset_Handler)
/* Highest address of the user mode stack */
_estack = 0x20001800; /* end of 6K RAM */
/* Generate a link error if heap and stack don't fit into RAM */
_Min_Heap_Size = 0; /* required amount of heap */
_Min_Stack_Size = 0x80; /* required amount of stack */
/* Specify the memory areas */
MEMORY
{
BOOTLOADER (rx) : ORIGIN = 0x08007000, LENGTH = 4K
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 28K
RAM (xrw) : ORIGIN = 0x200000C0, LENGTH = 6K - 192
MEMORY_B1 (rx) : ORIGIN = 0x60000000, LENGTH = 0K
}
/* Define output sections */
SECTIONS
{
/* The startup code goes first into BOOTLOADER */
.isr_vector :
{
. = ALIGN(4);
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >BOOTLOADER
/* The program code and other data goes into BOOTLOADER */
.text :
{
. = ALIGN(4);
*(.text) /* .text sections (code) */
*(.text*) /* .text* sections (code) */
*(.glue_7) /* glue arm to thumb code */
*(.glue_7t) /* glue thumb to arm code */
*(.eh_frame)
KEEP (*(.init))
KEEP (*(.fini))
. = ALIGN(4);
_etext = .; /* define a global symbols at end of code */
} >BOOTLOADER
/* Constant data goes into BOOTLOADER */
.rodata :
{
. = ALIGN(4);
*(.rodata) /* .rodata sections (constants, strings, etc.) */
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
. = ALIGN(4);
} >BOOTLOADER
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >BOOTLOADER
.ARM : {
__exidx_start = .;
*(.ARM.exidx*)
__exidx_end = .;
} >BOOTLOADER
.preinit_array :
{
PROVIDE_HIDDEN (__preinit_array_start = .);
KEEP (*(.preinit_array*))
PROVIDE_HIDDEN (__preinit_array_end = .);
} >BOOTLOADER
.init_array :
{
PROVIDE_HIDDEN (__init_array_start = .);
KEEP (*(SORT(.init_array.*)))
KEEP (*(.init_array*))
PROVIDE_HIDDEN (__init_array_end = .);
} >BOOTLOADER
.fini_array :
{
PROVIDE_HIDDEN (__fini_array_start = .);
KEEP (*(SORT(.fini_array.*)))
KEEP (*(.fini_array*))
PROVIDE_HIDDEN (__fini_array_end = .);
} >BOOTLOADER
/* used by the startup to initialize data */
_sidata = LOADADDR(.data);
/* Initialized data sections goes into RAM, load LMA copy after code */
.data :
{
. = ALIGN(4);
_sdata = .; /* create a global symbol at data start */
*(.data) /* .data sections */
*(.data*) /* .data* sections */
. = ALIGN(4);
_edata = .; /* define a global symbol at data end */
} >RAM AT> BOOTLOADER
/* Uninitialized data section */
. = ALIGN(4);
.bss :
{
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .; /* define a global symbol at bss start */
__bss_start__ = _sbss;
*(.bss)
*(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .; /* define a global symbol at bss end */
__bss_end__ = _ebss;
} >RAM
/* User_heap_stack section, used to check that there is enough RAM left */
._user_heap_stack :
{
. = ALIGN(4);
PROVIDE ( end = . );
PROVIDE ( _end = . );
. = . + _Min_Heap_Size;
. = . + _Min_Stack_Size;
. = ALIGN(4);
} >RAM
/* MEMORY_bank1 section, code must be located here explicitly */
/* Example: extern int foo(void) __attribute__ ((section (".mb1text"))); */
.memory_b1_text :
{
*(.mb1text) /* .mb1text sections (code) */
*(.mb1text*) /* .mb1text* sections (code) */
*(.mb1rodata) /* read-only data (constants) */
*(.mb1rodata*)
} >MEMORY_B1
/* Remove information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
.ARM.attributes 0 : { *(.ARM.attributes) }
}
解决方案
恐怕您不走运,您的处理器将始终从地址 0x00000000 开始运行代码(有点,它将查看 0x00000004 以查看重置向量的位置)。
有许多引导引脚可以改变闪存或 RAM 在地址 0x00000000 处的别名,但您无法选择闪存的哪个区域,它将始终从 0x08000000 开始。如果您想要自定义引导加载程序,并且首先运行它,它需要在闪存的开头。
您试图通过移动引导加载程序来解决什么问题?可能还有另一种可能的解决方案。
推荐阅读
- swift - 使用 for 循环从具有多个浮点值的字符串中删除非数字字符
- c++ - Visual Studio 2017 15.5 打破 C++ TypeDefs
- c - 确定温度转换不起作用的 C 程序
- java - 为什么位图大小在不同的屏幕上会发生变化?
- python - Python彩票生成器我试图弄清楚如何添加一个数字输入,并将它们分开并成为x数量的num long
- angular - Ag-grid + Angular 2:动态更改行节点中列的cellClass
- runtime - 运行时间和 theta 符号
- go - 为什么命令“go clean -n -r -i github.com/ethereum/go-ethereum...”不起作用?
- android - 混淆 API 是什么意思?
- c# - 自定义 ListViewItem 控件显示类名,其中常规 ListView 控件显示实际数据