linux - Gentoo中没有无线连接
问题描述
我是 Gentoo 的新手,我一直在尝试使用 wifi。使用 livecd 和最小安装,它可以完美运行。但是,安装后,我只有以太网。我已经为无线网卡的驱动程序重新编译了内核,但没有任何反应。
这是lspci -k
输出:
02:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
Subsystem: Lite-On Communications Inc QCA9377 802.11ac Wireless Network Adapter
Kernel driver in use: ath10k_pci
这是dmesg | grep ath10k_pci
输出:
[ 0.620754] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 0.832372] ath10k_pci 0000:02:00.0: Failed to find firmware-N.bin (N between 2 and 6) from ath10k/QCA9377/hw1.0: -2
[ 0.832375] ath10k_pci 0000:02:00.0: could not fetch firmware files (-2)
[ 0.832377] ath10k_pci 0000:02:00.0: could not probe fw (-2)
并且没有wifi设备ip link
:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether a8:1e:84:6e:d3:6a brd ff:ff:ff:ff:ff:ff
3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
感谢帮助
解决方案
您可能缺少ath10k_pci 驱动程序,否则我会查看wifi指南。
推荐阅读
- c# - 当我尝试注册 TypingDNA 集成时,我不断收到错误“无法验证提供的信息”
- python - 尝试使用联接不工作输出 2D 列表
- jekyll - 我使用带有 jekyll 的 github 页面使用流式语法。有奇怪的事情
- android - 使用 Android 摄像头读取非 HTTP 二维码发送意图?
- python - 如何将另一个数据框附加到相同结构的数据框并消除重复项?
- angular - 不能在另一个compounanet(角度)中使用compunat使用API
- python - Codechef Runtime Error-减少内存使用
- swift - Swift:是否可以将另一个类的静态属性传递给方法?
- spring-boot - 如何调用将接收字符串列表的spring boot rest api控制器
- javascript - React 组件不会收到传递给它的 props。使用逻辑运算符呈现时