linux - rsyslog 配置问题
问题描述
我正在尝试通过将我的 conf 文件放在 /etc/rsyslog.d/my.conf 中来配置 RSYSLOG 服务器以从我的另一台机器接收日志
文件:my.conf
source s_net { udp(ip(192.168.0.1) port(514)); }; filter VM01{ host( "192.168.0.2" ); }; destination df_VM01 { file("/var/log/my.log"); }; log { source ( s_net ); filter( VM01 ); destination ( df_VM01 ); };
文件:rsyslog.conf:
# rsyslog configuration file
# For more information see /usr/share/doc/rsyslog-*/rsyslog_conf.html
# If you experience problems, see http://www.rsyslog.com/doc/troubleshoot.html
#### MODULES ####
# The imjournal module bellow is now used as a message source instead of imuxsock.
$ModLoad imuxsock # provides support for local system logging (e.g. via logger command)
$ModLoad imjournal # provides access to the systemd journal
#$ModLoad imklog # reads kernel messages (the same are read from journald)
#$ModLoad immark # provides --MARK-- message capability
# Provides UDP syslog reception
#$ModLoad imudp
#$UDPServerRun 514
# Provides TCP syslog reception
#$ModLoad imtcp
#$InputTCPServerRun 514
#### GLOBAL DIRECTIVES ####
# Where to place auxiliary files
$WorkDirectory /var/lib/rsyslog
# Use default timestamp format
$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
# File syncing capability is disabled by default. This feature is usually not required,
# not useful and an extreme performance hit
#$ActionFileEnableSync on
# Include all config files in /etc/rsyslog.d/
$IncludeConfig /etc/rsyslog.d/*.conf
# Turn off message reception via local log socket;
# local messages are retrieved through imjournal now.
$OmitLocalLogging on
# File to store the position in the journal
$IMJournalStateFile imjournal.state
#### RULES ####
# Log all kernel messages to the console.
# Logging much else clutters up the screen.
#kern.* /dev/console
# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;authpriv.none;cron.none /var/log/messages
# The authpriv file has restricted access.
authpriv.* /var/log/secure
# Log all the mail messages in one place.
mail.* -/var/log/maillog
# Log cron stuff
cron.* /var/log/cron
# Everybody gets emergency messages
*.emerg :omusrmsg:*
# Save news errors of level crit and higher in a special file.
uucp,news.crit /var/log/spooler
# Save boot messages also to boot.log
local7.* /var/log/boot.log
# ### begin forwarding rule ###
# The statement between the begin ... end define a SINGLE forwarding
# rule. They belong together, do NOT split them. If you create multiple
# forwarding rules, duplicate the whole block!
# Remote Logging (we use TCP for reliable delivery)
#
# An on-disk queue is created for this action. If the remote host is
# down, messages are spooled to disk and sent when it is up again.
#$ActionQueueFileName fwdRule1 # unique name prefix for spool files
#$ActionQueueMaxDiskSpace 1g # 1gb space limit (use as much as possible)
#$ActionQueueSaveOnShutdown on # save messages to disk on shutdown
#$ActionQueueType LinkedList # run asynchronously
#$ActionResumeRetryCount -1 # infinite retries if host is down
# remote host is: name/ip:port, e.g. 192.168.0.1:514, port optional
#*.* @@remote-host:514
# ### end of the forwarding rule ###
# provides UDP syslog reception
$ModLoad imudp
$UDPServerRun 514
# provides TCP syslog reception
$ModLoad imtcp
$InputTCPServerRun 514
重新启动 rsyslog 服务后,我开始收到以下错误:配置错误:无法解释主配置文件“/etc/rsyslog.conf”。[v8.24.0-34.el7_6.3 try http://www.rsyslog.com/e/2207 ] 在第 1 行或之前解析文件 /etc/rsyslog.d/my.conf 时出错:文件中出现警告'/etc/rsyslog.d/my.conf' 在第 1 行附近
我在网上搜索了错误,它指的是这条消息:“错误最常出现在引用的行上,或者至少在它前面很近”
我没有引用的行,而且我的 Linux 经验很低,这就是为什么我想多学一点,但现在我被这个错误困住了。
有什么想法吗????
解决方案
有什么想法吗????
您的my.conf
文件似乎使用 syslog-ng 语法而不是 rsyslog 支持的语法。
这有点难读,但我建议从第 1 页开始并在此处阅读手册:https ://www.rsyslog.com/doc/v8-stable/ 。几年前我自己就这样做了,并从中学到了很多东西。
我已经有一段时间没有阅读它了,但我记得这个资源也很有用:
https://sematext.com/blog/rsyslog-ebook-centralized-logging-with-rsyslog/
推荐阅读
- java - Log4j MongoDB 在 30000 毫秒后卡在超时
- linux - 方法在静态 Linux 库中定义和未定义
- mockery - 为 mocks 设置方法参数的类型
- firebase - 如何从 fcm 注册令牌中获取设备类型/操作系统
- django - 如何获取我关注的用户?
- python - 无法让 .join() 在 for 循环和函数的内部和外部工作
- javascript - 如何使用 Aframe 组件返回之前的值?
- python - 扫描病毒python主目录后如何打破循环
- javascript - 由于表单内部的自定义指令,Angular.js 表单显示为无效
- php - 目标类 [App/Http/Controllers/Auth/LoginController] 不存在