c - 无法在 Adafruit FT232H 上使用 gpiod_line_request_output() 访问 gpio 线
问题描述
我正在使用 Adafruit Ft232H 分线器将 GPIO 端口添加到我的 Linux 电脑。虽然我在使用和 bitbang 模式闪烁 LED 方面取得了一些成功libftdi
,但我没有同样的运气,libgpiod
因为gpiod_line_request_output
它失败了。
我系统的一些gpio信息:
sudo gpiodetect
gpiochip0 [ftdi-cbus] (4 lines)
sudo gpioinfo
gpiochip0 - 4 lines:
line 0: unnamed unused input active-high
line 1: unnamed unused input active-high
line 2: unnamed unused input active-high
line 3: unnamed unused input active-high
这是试图访问第 0 行的 C 程序。
#include <stdio.h>
#include <stdlib.h>
#include <gpiod.h>
#define LINE_NUM 0
void gpio_fatal(struct gpiod_chip* chip, const char msg[20]);
int main(int argc, char** argv)
{
struct gpiod_chip* chip;
struct gpiod_line* line;
const char path[] = "/dev/gpiochip0";
chip = gpiod_chip_open(path);
if(!chip)
{
fprintf(stderr, "Error opening path\n");
return EXIT_FAILURE;
}
line = gpiod_chip_get_line(chip, LINE_NUM);
if(!line)
{
fprintf(stderr, "error getting this line\n");
return EXIT_FAILURE;
}
int ret = gpiod_line_request_output(line,
"ftdi-cbus",
1);
if(ret != 0)
gpio_fatal(chip, "Request output failed");
for(;;)
{
gpiod_line_set_value(line, 1);
printf("On\n");
sleep(1);
gpiod_line_set_value(line, 0);
printf("Off\n");
sleep(1);
}
gpiod_line_release(line);
gpiod_chip_close(chip);
return EXIT_SUCCESS;
}
void gpio_fatal(struct gpiod_chip* chip, const char* msg)
{
fprintf(stderr, "%s\n", msg);
gpiod_chip_close(chip);
exit(EXIT_FAILURE);
}
运行可执行文件sudo
给我:
sudo g_gpiod/build/g_gpiod
Password:
Request output failed
gpiod.h
失败功能的状态如下:
/**
* @brief Reserve a single line, set the direction to output.
* @param line GPIO line object.
* @param consumer Name of the consumer.
* @param default_val Initial line value.
* @return 0 if the line was properly reserved, -1 on failure.
*/
int gpiod_line_request_output(struct gpiod_line *line,
const char *consumer, int default_val) GPIOD_API;
参数似乎是正确的,为什么会失败?libftdi
使用或CircuitPython
可以访问端口并正常工作的其他示例。
解决方案
您需要刷新 EEPROM 来设置引脚 C5 的功能,例如使用 libftdi 中的 ftdi_eeprom 命令。首先,卸载 ftdi_sio 模块并保存原始 EEPROM:
$ sudo rmmod ftdi_sio
$ sudo ftdi_eeprom --verbose --device i:0x0403:0x6014 ft232h-orig.conf
FTDI eeprom generator v0.17
(c) Intra2net AG and the libftdi developers <opensource@intra2net.com>
FTDI read eeprom: 0
EEPROM size: 256
VID: 0x0403
PID: 0x6014
Release: 0x0900
Bus Powered: 100 mA
Manufacturer: ÿÿÿÿÿÿÿÿ
Product: ÿÿÿÿÿÿ
Serial: ÿÿÿÿÿÿÿÿ
Checksum : ffff
PNP: 1
Channel A has Mode UART
FT1284 Mode Clock is idle LOW, MSB first, No Flow Control
ACBUS has 4 mA drive
ADBUS has 4 mA drive
C0 Function: TRISTATE
C1 Function: TRISTATE
C2 Function: TRISTATE
C3 Function: TRISTATE
C4 Function: TRISTATE
C5 Function: TRISTATE
C6 Function: TRISTATE
C7 Function: TRISTATE
C8 Function: DRIVE_1
C9 Function: DRIVE_0
FTDI close: 0
该文件ft232h-orig.conf
只包含一行filename="ft232h-orig.bin"
。
您可以使用 ftdi_sio 模块控制 FT232H 的 4 个 GPIO 引脚:
| line | pin | remarks |
==========================
| 0 | C5 | - |
| 1 | C6 | - |
| 2 | C8 | red led |
| 3 | C9 | green led |
Adafruit 板具有连接到引脚 C8 和 C9 的两个 LED(红色和绿色)的阴极。默认 EEPROM 将 C9 设置为 DRIVE_0,以便在板通电时绿色 LED 为“开”。
这是我的 ftdi_eeprom 配置文件:
$ cat ft232h-libgpiod.conf
vendor_id="0x0403"
product_id="0x6014"
manufacturer="Adafruit"
product="FT232H Breakout"
# whatever
serial="20211223"
use_serial=true
max_power=100
self_powered=false
remote_wakeup=false
cha_type=UART
cha_vcp=false
cbush5=IOMODE
cbush6=IOMODE
# red led
cbush8=IOMODE
# green led
cbush9=DRIVE_0 # power-on indicator
#cbush9=IOMODE
$ sudo ftdi_eeprom --verbose --device i:0x0403:0x6014 --flash-eeprom ft232h-libgpiod.conf
您的程序现在可以在引脚 C5 上的第 0 行正常工作。作为奖励,您现在可以使用 libgpiod 命令控制红色 LED:
# turn red LED on (low active)
sudo gpioset gpiochip0 2=0
推荐阅读
- c# - 当使用按位和时,运算符 & 不能应用于 int 和 bool 类型的操作数
- java - Camel/Spring 无法识别正确的重载方法
- jquery - CSS3绘制边框动画方向
- php - MAMP 无法加载 php_memcache.dll
- android - 如何更改标题 NavigationView 的图像和文本
- c# - 将json反序列化为二维数组
- php - Mysql 数据选择
- spring-boot - JPA 自动完成功能在 Intelliji spring-boot kotlin 项目中不起作用
- sql-server - 使用 ISABOUT 时使用变量
- php - Mysql 计数与 wordpress 中的选择性能