android - 安装 CalyxOS 时出错:发送稀疏 'system_a' 2/4 - (读取稀疏文件时出错)
问题描述
我尝试在我的 Pixel 4a(5G) 上安装 CalyxOS。安装进展顺利,直到出现错误(见日志)。我无法开始任何事情。我刚来到快速启动菜单 - 没有更多的工作。因此,我使用 [Google Factory Flash][1] 进行了完整的重新安装,效果非常好。之后,我能够再次启动 Google Android,就像它是全新的出厂一样。
所以我再次下载了镜像并尝试第二次安装 CalyxOS,但不幸的是,该过程再次停止在完全相同的步骤。我应该怎么办?我现在必须再次闪烁,但是呢?有任何想法吗?
Android Factory Image Flasher version 1.0.3
Extracting bramble-factory-2.7.0.zip
Downloading https://dl.google.com/android/repository/platform-tools_r30.0.4-windows.zip
Downloading... 8.4 MB downloaded
Verifying platform-tools_r30.0.4-windows.zip
Extracting platform-tools_r30.0.4-windows.zip
1. Connect to a wifi network and ensure that no SIM cards are installed
2. Enable Developer Options on device (Settings -> About Phone -> tap "Build number" 7 times)
3. Enable USB debugging on device (Settings -> System -> Advanced -> Developer Options) and allow the computer to debug (hit "OK" on the popup when USB is connected)
4. Enable OEM Unlocking (in the same Developer Options menu)
Press ENTER to continue
Detected bramble 14221JECB06677
Devices to be flashed:
bramble 14221JECB06677
Press ENTER to continue
Unlocking bramble 14221JECB06677 bootloader...
5. Please use the volume and power keys on the device to unlock the bootloader
Flashing bramble 14221JECB06677 bootloader...
Sending 'bootloader_a' (8754 KB) OKAY [ 0.338s]
Writing 'bootloader_a' (bootloader) Flashing Pack version b5-0.3-7241846
(bootloader) Flashing partition table for Lun = 0
(bootloader) Flashing partition table for Lun = 1
(bootloader) Flashing partition table for Lun = 2
(bootloader) Flashing partition table for Lun = 4
(bootloader) Flashing partition table for Lun = 5
(bootloader) Flashing partition xbl_a
(bootloader) Flashing partition xbl_config_a
(bootloader) Flashing partition aop_a
(bootloader) Flashing partition tz_a
(bootloader) Flashing partition hyp_a
(bootloader) Flashing partition abl_a
(bootloader) Flashing partition keymaster_a
(bootloader) Flashing partition devcfg_a
(bootloader) Flashing partition qupfw_a
(bootloader) Flashing partition uefisecapp_a
(bootloader) Flashing partition featenabler_a
(bootloader) Flashing partition logfs
OKAY [ 0.260s]
Finished. Total time: 0.863s
Rebooting into bootloader OKAY [ 0.048s]
Finished. Total time: 0.052s
< waiting for any device >
Sending 'radio_a' (149780 KB) OKAY [ 3.948s]
Writing 'radio_a' (bootloader) Flashing Pack version SSD:g7250-00132-210419-B-7294132
(bootloader) Flashing partition modem_a
OKAY [ 0.809s]
Finished. Total time: 5.023s
Rebooting into bootloader OKAY [ 0.048s]
Finished. Total time: 0.052s
< waiting for any device >
Erasing 'avb_custom_key' OKAY [ 0.215s]
Finished. Total time: 0.339s
Sending 'avb_custom_key' (0 KB) OKAY [ 0.138s]
Writing 'avb_custom_key' OKAY [ 0.221s]
Finished. Total time: 0.556s
Rebooting into bootloader OKAY [ 0.047s]
Finished. Total time: 0.051s
< waiting for any device >
--------------------------------------------
Bootloader Version...: b5-0.3-7241846
Baseband Version.....: g7250-00132-210419-B-7294132
Serial Number........: 14221JECB06677
--------------------------------------------
extracting android-info.txt (0 MB) to RAM...
Checking 'product' OKAY [ 0.067s]
Checking 'version-bootloader' OKAY [ 0.067s]
Checking 'version-baseband' OKAY [ 0.066s]
Setting current slot to 'a' OKAY [ 0.082s]
extracting boot.img (96 MB) to disk... took 0.268s
archive does not contain 'boot.sig'
Sending 'boot_a' (98304 KB) OKAY [ 2.688s]
Writing 'boot_a' OKAY [ 0.482s]
extracting dtbo.img (16 MB) to disk... took 0.040s
archive does not contain 'dtbo.sig'
Sending 'dtbo_a' (16384 KB) OKAY [ 0.478s]
Writing 'dtbo_a' OKAY [ 0.143s]
archive does not contain 'dt.img'
archive does not contain 'recovery.img'
extracting vbmeta.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta.sig'
Sending 'vbmeta_a' (8 KB) OKAY [ 0.138s]
Writing 'vbmeta_a' OKAY [ 0.075s]
extracting vbmeta_system.img (0 MB) to disk... took 0.001s
archive does not contain 'vbmeta_system.sig'
Sending 'vbmeta_system_a' (4 KB) OKAY [ 0.138s]
Writing 'vbmeta_system_a' OKAY [ 0.075s]
extracting vendor_boot.img (96 MB) to disk... took 0.196s
archive does not contain 'vendor_boot.sig'
Sending 'vendor_boot_a' (98304 KB) OKAY [ 2.419s]
Writing 'vendor_boot_a' OKAY [ 0.469s]
extracting super_empty.img (0 MB) to disk... took 0.000s
Rebooting into fastboot OKAY [ 0.065s]
< waiting for any device >
Sending 'super' (4 KB) OKAY [ 0.002s]
Updating super partition OKAY [ 0.008s]
Resizing 'product_a' OKAY [ 0.004s]
Resizing 'system_a' OKAY [ 0.005s]
Resizing 'system_ext_a' OKAY [ 0.005s]
Resizing 'system_b' OKAY [ 0.005s]
Resizing 'vendor_a' OKAY [ 0.005s]
Resizing 'vendor_b' OKAY [ 0.005s]
archive does not contain 'boot_other.img'
archive does not contain 'odm.img'
extracting product.img (994 MB) to disk... took 3.752s
archive does not contain 'product.sig'
Resizing 'product_a' OKAY [ 0.005s]
Sending sparse 'product_a' 1/4 (262140 KB) OKAY [ 6.571s]
Writing 'product_a' OKAY [ 2.533s]
Sending sparse 'product_a' 2/4 (262140 KB) OKAY [ 6.435s]
Writing 'product_a' OKAY [ 1.567s]
Sending sparse 'product_a' 3/4 (262140 KB) OKAY [ 6.438s]
Writing 'product_a' OKAY [ 1.553s]
Sending sparse 'product_a' 4/4 (231696 KB) OKAY [ 5.773s]
Writing 'product_a' OKAY [ 1.381s]
extracting system.img (801 MB) to disk... took 3.667s
archive does not contain 'system.sig'
Resizing 'system_a' OKAY [ 0.005s]
Sending sparse 'system_a' 1/4 (262140 KB) OKAY [ 6.492s]
Writing 'system_a' OKAY [ 2.535s]
Sending sparse 'system_a' 2/4 (262140 KB) FAILED (Error reading sparse file)
fastboot: error: Command failed
Rebooting into bootloader
解决方案
FAILED (Error reading sparse file)
将 USB 电缆连接到笔记本电脑的底座时遇到问题。
而是将 USB Type-A 端直接连接到我的笔记本电脑端口帮助我解决了这个问题。请注意 USB 3.0、USB Type C 和 USB 2.0 端口(全部尝试)并在管理员模式下在命令提示符下运行您的命令。
推荐阅读
- laravel-8 - 动态请求路径
- ada - 使用 SPARK 证明选择排序算法
- php - Symfony:在“services.yaml”中为选定目录中的所有类设置“public”属性
- python - Spacy3.0 上的自定义 NER - ValueError
- node.js - express 中的高级可选路由
- sql - Oracle Apex 根据条件预填充 IG 字段
- javascript - 以灵活的方式在div组件后显示按钮
- javascript - 多次调用时,Sharepoint fetchClientFactory 未更新站点 url
- android - ConstraintLayout 无法在 Kotlin 中强制转换为 TextView
- r - 绘制具有两个连续变量但 R 生成“提供给连续尺度的离散值”错误的散点图